Operation Manual

CHAPTER 6 TROUBLE SHOOTING
6-7
Service Call
Message
Meaning Action
ERROR EH4
WARNING
Fuser
temperature 4
error
Turn off the printer. Wait 15 minutes,
and then turn it on again.
ERROR EL1
WARNING
Beam detector
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EL2
WARNING
Scanner motor
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR ELL
WARNING
Laser power error Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP1
WARNING
Duplex controller
hardware error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP3
WARNING
Feeder pass
select solenoid
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP4
WARNING
Duplex motor
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP5
WARNING
Outer pass select
solenoid error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP6
WARNING
Optional fan error Turn off the printer. Wait a few
seconds, and then turn it on again.