Quick Setup Guide
Table Of Contents
- Quick Setup Guide HL-3040CN
- Start Here
- For USB Interface Cable Users (For Windows® users)
- For USB Interface Cable Users (For Mac OS X users)
- For Wired Network Interface Cable Users (For Windows® users)
- For Wired Network Interface Cable Users (For Mac OS X users)
- For Network Users
- Other Information
- Safety precautions
- Regulations
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Important
- Important - about the interface cable
- Radio interference
- Industry Canada Compliance Statement (Canada only)
- EC Declaration of Conformity
- International ENERGY STAR® Compliance Statement
- Disconnect device
- EU Directive 2002/96/EC and EN50419
- IMPORTANT - For Your Safety
- LAN connection
- Wiring information (UK only)
- Warning - This printer must be earthed.
- Shipment of the printer
- Repacking Instructions
- Supplied CD-ROM
- Control panel
- Options and Consumables
12
MacintoshUSB
For USB Interface Cable Users
8
Connect the printer to
your Macintosh and
install the driver
a Remove the label covering the USB interface
connector.
b Connect the USB cable to the USB connector
marked with a symbol, and then connect
the cable to your Macintosh.
c Make sure the printer power switch is on.
d Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
e Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
f Click Install Printer Driver on the menu
screen.
g Click USB cable users and follow the
on-screen instructions. Then, restart your
Macintosh.
h The Brother software will search for the Brother
printer. During this time the following screen
will appear.
IMPORTANT
• DO NOT connect the printer to a USB port on
a keyboard or a non-powered USB hub.
• Connect the printer directly to your
computer.