User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 4 CONTROL PANEL OPERATION
4-35
Set IP Address
--MENU--
INFORMATION
Press
+
.
--MENU--
NETWORK
Press
Set
.
NETWORK
TCP/IP
Press
Set
.
TCP/IP
TCP/IP ENABLE
Press
+
.
TCP/IP
IP ADDRESS=
Press
Set
.
IP ADDRESS=
192.0.0.192
*
The last digit in the first part of the number is blinking.
Press
+
or
–
to increase or decrease the number.
Press
Set
to go to the next digit.
IP ADDRESS=
123.0.0.192
Repeat this process until you have set your IP address.
IP ADDRESS=
123.45.67.89
Press
Set
to complete the IP address.
IP ADDRESS=
123.45.67.89
*
An asterisk appears at the end of the display.