User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 5 MAINTENANCE
5-6
Replacing the Toner Cartridges
!
Caution
When replacing the Toner Cartridges, handle them carefully so that toner
does not spill.
Note
To ensure optimum print quality, use genuine Brother toner cartridges. Third
party toner cartridges may not work in your printer.
To obtain genuine Brother supplies, consult the dealer where you purchased
the printer.
To replace the toner cartridge(s), follow these steps:
1.
Open the Front Cover of the printer.
2.
Remove the Toner Cartridge(s) that has run out of toner. Pull the Toner
Cartridge out slightly with one hand, then hold the Toner Cartridge with
both hands and pull it out of the printer.
3.
After rocking each new Toner Cartridge 3 to 4 times from side to side,
remove the tape labeled ‘REMOVE’ and the orange protective cover from
the new Toner Cartridge.
Fig. 5-1