User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
![](/manual/brother/hl-3450cn/1-user-guide-english/images/img-112.png)
CHAPTER 5 MAINTENANCE
5-17
1.
Open the Front Cover.
2.
Remove the Waste Toner Pack
from the holder located at the
lower right side of the printer. Be
careful not to spill the toner.
Fig. 5-10
3.
Peel off the sealing sticker on the
right side of the Waste Toner
Pack. Seal the opening with the
sealing sticker. See Fig. 5-11 for
the correct placement of the
sticker. When you dispose of the
used Waste Toner Pack, place it
in the plastic bag included with
the replacement Waste Toner
Pack. Please dispose of the
Waste Toner Pack in accordance
with local regulations.
Fig. 5-11
4.
Insert the new Waste Toner Pack into the Waste Toner Pack Holder.
5.
Close the Front Cover.