User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
![](/manual/brother/hl-3450cn/1-user-guide-english/images/img-130.png)
CHAPTER 5 MAINTENANCE
5-35
10.
Press Set, and then press + until “240K KIT” appears.
11.
Press Set, and then press Go. The printer is now in the READY state.
Note
•
User replacement of some of these parts is not recommended.
•
For replacement of the Paper Feeding Roller, Separator Pad and the
Transfer Drum, consult your local dealer/retailer.
•
Actions 7 to 11 should only be carried out by your dealer or Brother
authorized service center when they replace the Paper Feeding
Roller, Separator Pad and the Transfer Drum.
•
Replacement of only the Transfer Roller is not a full 240K service so
the counter should not be reset until these additional parts are
replaced.