User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 6 OPTIONS
6-2
1.
Remove the Paper Cassette from the printer.
2.
Place the Lower Tray Unit on a flat surface.
3.
Adjust the Anchor Feet, located
at the rear and right hand side at
the bottom of the Lower Tray
Unit, to level the tray unit. The
Anchor Foot moves up and down
as it is turned. Adjustment is
completed when the Anchor Foot
touches the surface of the work
surface and the tray unit is level.
Turn the lock screw to secure the
Anchor Foot.
Fig. 6-1
4.
Remove both side covers from
the Lower Tray Unit.
Fig. 6-2
5.
Make sure that the Metal Lock
Plate at the front of the tray unit
is in the Release position.
Fig. 6-3