User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 6 OPTIONS
6-17
5.
Fit the 4 HD-6G/HD-EX shoulder
screws into the 4 holes of the
main controller board, and then
secure the shoulder screws with
the screws provided from the rear
of the PCB.
Fig. 6-23
6.
Connect the flat cable to the main
controller board.
Fig. 6-24
7.
Install the main controller board
into the printer by sliding it into
the guide rails.
Fig. 6-25
8.
Secure the main controller board with the 2 screws.
9.
Reconnect the interface cable to the printer. Plug the power cord into the
AC outlet, and then turn on the printer.
10.
Format the HD-6G/HD-EX from the control panel. See Chapter 4 for
details.