User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 6 OPTIONS
6-21
5.
Press the DIMM straight into the slot (press firmly). Make sure the locks on
each side of the DIMM snap inward into place. (To remove a DIMM, the
locks must be released.)
6.
Reinstall the main controller
board into the printer by sliding it
into the guide rails.
Fig. 6-28
7.
Secure the main controller board with the two screws.
8.
Reconnect the printer cable from your computer. Plug the power cord into
the AC outlet, and turn on the printer.
9.
To check whether the DIMM has been installed correctly, you may perform
a Test Print “Print Configuration” that will print the current memory size.