User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 7 TROUBLE SHOOTING
7-6
Service Call
Message
Meaning Action
ERROR EE4
WARNING
Toner empty
sensor error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EE5
WARNING
Transfer roller
solenoid error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EE6
WARNING
Drum cleaning
solenoid error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EE7
WARNING
Drum cleaning
clutch error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EE8
WARNING
Fuser unit clutch
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EE9
WARNING
Belt marker
sensor error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EEL
WARNING
Erase LED error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EF0
WARNING
Cooling fan error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EF2
WARNING
Ozone fan error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EF4
WARNING
Fuser fan error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EF5
WARNING
Charger HV unit
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EH0
WARNING
Fuser thermistor
error
Turn off the printer. Wait 15 minutes,
and then turn it on again.
ERROR EH2
WARNING
Fuser
temperature 2
error
Turn off the printer. Wait 15 minutes,
and then turn it on again.
ERROR EH3
WARNING
Fuser
temperature 3
error
Turn off the printer. Wait 15 minutes,
and then turn it on again.