User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 7 TROUBLE SHOOTING
7-7
Service Call
Message
Meaning Action
ERROR EH4
WARNING
Fuser
temperature 4
error
Turn off the printer. Wait 15 minutes,
and then turn it on again.
ERROR EL1
WARNING
Beam detector
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EL2
WARNING
Scanner motor
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR ELL
WARNING
Laser power error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP1
WARNING
Duplex controller
hardware error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP3
WARNING
Feeder pass
select solenoid
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP4
WARNING
Duplex motor
error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP5
WARNING
Outer pass select
solenoid error
Turn off the printer. Wait a few
seconds, and then turn it on again.
ERROR EP6
WARNING
Optional fan error
Turn off the printer. Wait a few
seconds, and then turn it on again.