User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 1 INTRODUCTION
1-14
The power cord, including extensions, should not exceed 5 meters (16.5
feet).
Do not share the same power circuit with other high-power appliances,
particularly an air conditioner, copier, shredder, etc. If you must use the
printer with these appliances, we recommend that you use a voltage
transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
Environment
Use the printer only within the following ranges of temperature and
humidity.
Ambient temperature: 10°C to 32.5°C (50°F to 90.5°F)
Ambient humidity: 20% to 80% (without condensation)
Do not block the air exit on top of the printer. Do not place objects on top of
the printer, especially on the air exit.
Ensure that the printer Ozone Filter is installed at all times.
Ventilate the room where you use the printer.
Do not place the printer where it will be exposed to direct sunlight. Use
blinds to protect the printer from direct sunlight if set up near a window is
unavoidable.
Do not install the printer near devices that contain magnets or generate
magnetic fields.
Do not subject the printer to strong physical shocks or vibrations. Do not
expose the printer to open flames or salty or corrosive gasses.
Place the printer on a flat, horizontal surface.
Keep the printer clean. Do not install the printer in a dusty place.
Do not install the printer near an air conditioner.
Do not install the printer in a room with a humidifier.