User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 3 BEFORE WORKING WITH THE PRINTER
3-9
Printable Area
The Printable Area depends on the settings in your application. The figure
below shows the printable and non-printable areas of various paper types
with this printer.
Fig. 3-1
Non-printable Area
Non-guaranteed Print Area
Plain Paper
Envelopes
4mm (0.16")
Simplex
Paper: 5mm (0.2")
Other: 10mm (0.39")
Duplex
5mm (0.2") Side B
7mm (0.28") Side A
4mm (0.16)
Paper: 4mm (0.16")
Other:
10mm (0.39")
3mm
(0.12")
3mm
(0.12")
3mm
(0.12")
3mm
(0.12")
5mm (0.2")
5mm (0.2")
4mm (0.16)
4mm
(0.16”)
#10: 68mm (2.68")
DL: 40mm (1.57")
#10: 68mm (2.68")
DL: 40mm (1.57")
42mm (1.65")
16mm (0.63")
4mm (0.16")
5mm (0.2")
Minimum
297mm (11.69") Maximum
457mm (17.99")
Maximum
4mm (0.16)
Simplex
Paper: 5mm (0.2")
Other: 10mm (0.39")
Duplex
5mm (0.2") Side B
7mm (0.28") Side A
309mm (12.17") Maximum