User Guide
Table Of Contents
- Definitions of Warnings, Cautions, and Notes
- To Use the Printer Safely
- Printer Do's and Don'ts for Optimum Print Quality
- TABLE OF CONTENTS
- IMPORTANT INFORMATION: REGULATIONS
- CHAPTER 1 INTRODUCTION
- ABOUT THIS USER’S GUIDE
- ABOUT THIS PRINTER
- Checking the Components
- General View
- Features
- 2400 DPI Class Resolution
- High Speed and Color Laser Printing
- Color Advanced Photoscale Technology (CAPT)
- High Resolution Control (HRC)
- Maintenance-Free and Economical Toner Cartridge
- Universal Paper Cassette
- Three Interfaces
- Automatic Interface Selection
- Five Emulation Modes
- Automatic Emulation Selection
- Data Compression Technology
- Various Fonts
- CCITT G3/G4
- Panel Lock Function
- Power Save Mode
- Toner Save Mode
- Reprint Function
- PANTONE® Calibrated
- Network
- Options
- Compact Flash Card
- RAM
- Operating and Storage Environment
- CHAPTER 2 DRIVER AND SOFTWARE
- CHAPTER 3 BEFORE WORKING WITH THE PRINTER
- CHAPTER 4 CONTROL PANEL OPERATION
- CHAPTER 5 MAINTENANCE
- CHAPTER 6 OPTIONS
- CHAPTER 7 TROUBLE SHOOTING
- APPENDIX
- INDEX
CHAPTER 4 CONTROL PANEL OPERATION
4-7
Reprint the last JOB 3 times
1.
Use the control panel to turn the REPRINT function ON in SETUP
mode.
Notes
If you are using the driver supplied with the printer, the settings for spooling
jobs in the printer driver will take priority over the settings made using the
control panel. For more information about the settings in the printer driver, see
“Job Spooling” in Chapter 2.
2.
Press Reprint .
---REPRINT---
COPIES= 1
If you wait too long to continue the key operation, the display
exit the REPRINT menu automatically.
Press + twice.
---REPRINT---
COPIES= 3
Press Set or Reprint.
PRINTING
---REPRINT---
COPIES= 1
Notes
•
If you press Go, the printer will exit from the Reprint menu.
•
If you want to reprint the data and have pressed Go, the display will show
“PRESS SET TO PRINT.” Press Set to start reprinting, or press Go to
cancel the reprint job.