Quick Start Manual
Table Of Contents
- Safety Precautions
- Getting Started
- Carton Components
- Control Panel
- Supplied CD-ROM
- Setting Up Your Printer
- Installing the Driver
- For USB Interface Cable Users
- For Parallel Interface Cable Users
- For Network Interface Cable Users
- For Brother Peer-to-Peer Network Printer Users (LPR)
- For Brother Peer-to-Peer Network Printer Users (NetBIOS)
- For Network Shared Printer Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Administrators
- Other Information
14
Setting Up Your Printer
1 Pull the paper tray out until it stops.
Lift up the front of the paper tray slightly and
then remove it completely from the printer.
2 Remove the protective packing.
3 Slide the side paper guides out.
Lift the end paper guide and insert it into the
slot of the paper size you want to load.
4 Load paper in the paper tray.
Make sure that all the paper is under the
tabs.
5 Align the side paper guides with the paper.
6 Put the paper tray back in the printer.
3 Load Paper in the Paper Tray
Paper Tray
Protective Packing
End Paper Guide
Paper Guide
MAX
Up to here
Step 1