Quick Start Manual
Table Of Contents
- Safety Precautions
- Getting Started
- Carton Components
- Control Panel
- Supplied CD-ROM
- Setting Up Your Printer
- Installing the Driver
- For USB Interface Cable Users
- For Parallel Interface Cable Users
- For Network Interface Cable Users
- For Brother Peer-to-Peer Network Printer Users (LPR)
- For Brother Peer-to-Peer Network Printer Users (NetBIOS)
- For Network Shared Printer Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Administrators
- Other Information
17
Installing the Driver
1. Installing the Driver and Connecting the Printer to Your PC
1 Make sure the USB interface cable is NOT
connected to the printer, and then begin
installing the driver. If you have already
connected the cable, remove it.
2 Insert the CD-ROM for Windows
into your
CD-ROM drive. The opening screen will
appear automatically.
Follow the instructions on the screen.
3 Click Install Software on the Menu screen.
4 Depending on the paper size you plan on
using, select Standard Driver - default A4
(Recommended) or Standard Driver -
default Letter (Recommended).
5 Click the Next button.
Follow the instructions on the screen.
6 Select Standard Installation, and then
click the Next button.
7 Select Local Printer with USB cable, and
then click the Next button.
For USB Interface Cable Users
If the Found New Hardware Wizard
appears on your PC, click the Cancel button.
C
A
N
C
EL
Step 2