Quick Start Manual
Table Of Contents
- Safety Precautions
- Getting Started
- Carton Components
- Control Panel
- Supplied CD-ROM
- Setting Up Your Printer
- Installing the Driver
- For USB Interface Cable Users
- For Parallel Interface Cable Users
- For Network Interface Cable Users
- For Brother Peer-to-Peer Network Printer Users (LPR)
- For Brother Peer-to-Peer Network Printer Users (NetBIOS)
- For Network Shared Printer Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Administrators
- Other Information
19
Installing the Driver
Connecting the Printer to Your PC and Installing the Driver
1 Turn off the printer power switch.
2 Connect the parallel interface cable to your
PC, and then connect it to your printer.
3 Turn on the printer power switch.
4 Insert the CD-ROM for Windows
into your
CD-ROM drive. The opening screen will
appear automatically.
Follow the instructions on the screen.
5 Click Install Software on the Menu screen.
6 Depending on the paper size you plan on
using, select Standard Driver - default A4
(Recommended) or Standard Driver -
default Letter (Recommended).
7 Click the Next button.
Follow the instructions on the screen.
For Parallel Interface Cable Users
If the Found New Hardware Wizard
appears on your PC, click the Cancel button.
C
A
N
C
E
L
Step 2