Quick Start Manual
Table Of Contents
- Safety Precautions
- Getting Started
- Carton Components
- Control Panel
- Supplied CD-ROM
- Setting Up Your Printer
- Installing the Driver
- For USB Interface Cable Users
- For Parallel Interface Cable Users
- For Network Interface Cable Users
- For Brother Peer-to-Peer Network Printer Users (LPR)
- For Brother Peer-to-Peer Network Printer Users (NetBIOS)
- For Network Shared Printer Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Administrators
- Other Information
25
Installing the Driver
Connecting the Cable, Installing the Driver and Selecting the Appropriate
Printer Queue or ‘Share name’
1 Turn off the printer power switch.
2 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
3 Turn on the printer power switch.
4 Insert the CD-ROM for Windows
into your
CD-ROM drive. The opening screen will
appear automatically.
Follow the instructions on the screen.
5 Click Install Software on the Menu screen.
6 Depending on the paper size you plan on
using, select Standard Driver - default A4
(Recommended) or Standard Driver -
default Letter (Recommended).
7 Click the Next button.
Follow the instructions on the screen.
For Network Interface Cable Users
For Network Shared Printer Users
If you are going to connect the printer to your network, we recommended that you contact your system
administrator prior to installation.
Hub
Step 2