Quick Start Manual
Table Of Contents
- Safety Precautions
- Getting Started
- Carton Components
- Control Panel
- Supplied CD-ROM
- Setting Up Your Printer
- Installing the Driver
- For USB Interface Cable Users
- For Parallel Interface Cable Users
- For Network Interface Cable Users
- For Brother Peer-to-Peer Network Printer Users (LPR)
- For Brother Peer-to-Peer Network Printer Users (NetBIOS)
- For Network Shared Printer Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Administrators
- Other Information
27
Installing the Driver
1. Set the Adobe Protocol
1 Press .
2 Press 5 times.
3 Press .
4 Press .
5 Press .
6 Press .
3 seconds later, an
asterisk appears.
7 Restart the printer.
2. Connecting the Printer to Your
Macintosh & Installing the PPD
File and Adobe PS Driver
1 Make sure the printer power switch is on.
2 Connect the USB interface cable to your
Macintosh
®
, and then connect it to the
printer.
3 Insert the CD-ROM for Macintosh
into
your CD-ROM drive.
Open the Mac OS 9 folder.
4 Open your language folder.
For USB Interface Cable Users
For Mac OS
®
8.6 to 9.2 Users
MENU
1:System
Menu
6:USB
6:USB
Adobe Protocol
Adobe Protocol
TBCP *
Adobe Protocol
RAW
Reboot System
to take effect
Adobe Protocol
RAW *
Do not connect the USB cable to the
keyboard USB Port or a non-powered
USB Hub.
Step 2