Quick Start Manual
Table Of Contents
- Safety Precautions
- Getting Started
- Carton Components
- Control Panel
- Supplied CD-ROM
- Setting Up Your Printer
- Installing the Driver
- For USB Interface Cable Users
- For Parallel Interface Cable Users
- For Network Interface Cable Users
- For Brother Peer-to-Peer Network Printer Users (LPR)
- For Brother Peer-to-Peer Network Printer Users (NetBIOS)
- For Network Shared Printer Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Mac OS® 8.6 to 9.2 Users
- For Mac OS® X 10.1 / 10.2 Users
- For Administrators
- Other Information
33
Installing the Driver
Connecting the Printer to Your Network & Installing the Adobe PostScript 3
PPD File
1 Turn off the printer power switch.
2 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
3 Turn on the printer power switch.
4 Insert the CD-ROM for Macintosh
into the
CD-ROM drive.
Open the Start Here OS X folder. Follow the
instructions on the screen.
5 Click Install Software on the Menu screen.
Follow the instructions on the screen.
6 Select Applications from the Go menu.
7 Open the Utilities folder.
8 Open the Print Center icon.
For Network Interface Cable Users
For Mac OS
®
X 10.1 / 10.2 Users
Hub
Continue to
the next page
Step 2