User Manual
Table Of Contents
- Using this guide
- Safety precautions
- Trademarks
- Compilation and Publication Notice
- Shipment of the Printer
- 1 About this Printer
- 2 Printing Methods
- 3 Driver and Software
- Printer driver
- Software
- 4 Control Panel
- 5 Options
- 6 Routine Maintenance
- 7 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets
- Quick reference for bar code control commands
- Print bar codes or expanded characters
- Definition of Parameters
- Bar code mode
- Bar Code, expanded character, line block drawing and box drawing
- Bar Code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Appendix (For Europe and Other Countries) B
- Appendix (For USA and Canada) C
- Index
A. Appendix
108
Symbol and character sets
For the HP LaserJet, IBM Proprinter XL, and EPSON FX-850 emulation modes, you can choose the symbol
and character sets using a web browser or the Remote Printer Console software.
How to use the web browser
To use the web browser, follow the steps below.
a Enter [http://printer’s IP address/] into your browser.
For example: [http://192.168.1.2/] (if the printer’s IP address is 192.168.1.2)
b Click Printer Settings.
c Enter a user name and a password. The default User Name is [admin] and the default Password is
[access].
d Click OK.
e Choose the HP LaserJet, IBM Proprinter XL or EPSON FX-850 tab and click Font Setup. Choose a
symbol set you want to use from the Symbol Set list box.
How to use the Remote Printer Console
To use the Remote Printer Console software, follow the steps below.
For Windows
®
a Put the CD-ROM into your CD-ROM drive and close the opening screen when it appears.
b Open Windows
®
Explorer and choose the CD-ROM drive.
c Double-click the RPC folder.
d See the RPC_User’s_Guide.pdf for how to install and use the Remote Printer Console.
For Macintosh
®
a Put the CD-ROM into your CD-ROM drive. Double-click the HL5200 icon on the desktop.
b Double-click the RPC folder.
c See the RPC_User’s_Guide.pdf for how to install and use the Remote Printer Console.