User Manual
Table Of Contents
- Using this guide
- Safety precautions
- Trademarks
- Compilation and Publication Notice
- Shipment of the Printer
- 1 About this Printer
- 2 Printing Methods
- 3 Driver and Software
- Printer driver
- Software
- 4 Control Panel
- 5 Options
- 6 Routine Maintenance
- 7 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets
- Quick reference for bar code control commands
- Print bar codes or expanded characters
- Definition of Parameters
- Bar code mode
- Bar Code, expanded character, line block drawing and box drawing
- Bar Code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Appendix (For Europe and Other Countries) B
- Appendix (For USA and Canada) C
- Index
3. Driver and Software
26
Features in the printer driver (For Windows
®
)
For more information, see the Help text in the printer driver.
Note
• The screens in this section are from Windows
®
XP. The screens on your PC will vary depending on your
operating system.
• If you are using Windows
®
2000 or XP, you can access the Printing Preferences dialog box by clicking
Printing Preferences... in the General tab of the Printer Properties dialog box.
• If you are using Windows NT
®
4.0, you can access the Printing Preferences dialog box by clicking
Document Defaults... from the File menu of the Printers folder.
Basic tab
You can also change some of the settings by clicking the illustrations on the left hand side.
a Choose the Paper Size, Multiple Page, Orientation and other settings (1).
b Choose the Duplex / Booklet setting from None, Duplex or Booklet (2).
Note
You can choose more detailed settings for Duplex or Booklet printing in the the Advanced tab. See Duplex
Printing on page 28.
c Choose the Paper Source (3).
d Click OK to apply your chosen settings.
To return to the default settings, click Default, then OK.
1
3
2