User Manual
Table Of Contents
- USER'S GUIDE HL-5340D / HL-5350DN / HL-5370DW
- Using this guide
- Safety precautions
- Trademarks
- Compilation and Publication Notice
- Shipment of the Printer
- Table of Contents
- 1 About this Printer
- 2 Printing Methods
- 3 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Resolution
- Print Setting
- Multiple Page
- Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Administrator
- Other Print Options...
- Use Reprint
- Sleep Time
- Macro
- Page Protection
- Density Adjustment
- Error Message Printout
- Improve Print Output
- Accessories tab
- Support
- Status Monitor
- Using the BR-Script3 printer driver (PostScript® 3™ language emulation for Windows®)
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Using the BR-Script3 printer driver (Post Script® 3™ language emulation for Macintosh)
- Uninstalling the printer driver
- Software
- Printer driver
- 4 Control Panel
- 5 Options
- 6 Routine Maintenance
- 7 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets
- Quick reference for bar code control commands
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Appendix B (for Europe and Other Countries)
- Appendix C (for USA and Canada)
- Index
Appendix
147
A
Print surface 0
The characteristics of the face side and reverse side of a sheet of paper may vary a little.
Usually, the opening side of the paper ream package is the print side. Follow the indications on the paper
package. Typically, the print side is indicated by an arrow.
Moisture content
0
Moisture content is the amount of water left in the paper after manufacture. It is one of the important
characteristics of the paper. This can change greatly depending on the storage environment, although usually
paper contains about 5% water by weight. Because paper often absorbs water, the amount of water can
sometimes be about 10% in a high humidity environment. When the amount of water increases, the
characteristics of the paper changes greatly. The fixing of the toner may become worse. For storage of the
paper and during use, we recommend that the humidity of the surrounding environment be between 50% and
60%.
Rough estimate of basis weight
0
Paper size 0
g/m
2
lb
Bond Index
60 16
64 17
75 20
90 24
105 28
120 32
135 36
163 43 90
200 53 110
Paper size mm in.
Letter 8.5 × 11 in.
Legal 8.5 × 14 in.
Executive 7.25 × 10.5 in.
A4 210 × 297 mm
A5 148 × 210 mm
A5 (Long Edge) 210 × 148 mm
A6 105 × 148 mm
Envelope Monarch 3.875 × 7.5 in.
Envelope Com-10 4.12 × 9.5 in.
Envelope DL 110 × 220 mm