User Manual
Table Of Contents
- USER'S GUIDE HL-5340D / HL-5350DN / HL-5370DW
- Using this guide
- Safety precautions
- Trademarks
- Compilation and Publication Notice
- Shipment of the Printer
- Table of Contents
- 1 About this Printer
- 2 Printing Methods
- 3 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Resolution
- Print Setting
- Multiple Page
- Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Administrator
- Other Print Options...
- Use Reprint
- Sleep Time
- Macro
- Page Protection
- Density Adjustment
- Error Message Printout
- Improve Print Output
- Accessories tab
- Support
- Status Monitor
- Using the BR-Script3 printer driver (PostScript® 3™ language emulation for Windows®)
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Using the BR-Script3 printer driver (Post Script® 3™ language emulation for Macintosh)
- Uninstalling the printer driver
- Software
- Printer driver
- 4 Control Panel
- 5 Options
- 6 Routine Maintenance
- 7 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets
- Quick reference for bar code control commands
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Appendix B (for Europe and Other Countries)
- Appendix C (for USA and Canada)
- Index
76
4
4
Control Panel4
LEDs (Light Emitting Diodes) 4
This section refers to five LEDs Back Cover, Toner, Drum, Paper, Status and two buttons Job Cancel and
Go on the control panel.
The LED indications shown in the table below are used in the illustrations in this chapter.
Control Panel 4
1) Back Cover LED
The Back Cover LED indicates when errors
occur in the back of the printer.
2) Toner LED
The Toner LED indicates when the Toner is
low or at the end of its life.
3) Drum LED
The Drum LED indicates when the Drum is
nearing the end of its life.
4) Paper LED
The Paper LED indicates when the printer is
in one of the following states: No paper /
Paper jam / Cover open
5) Status LED
The Status LED will flash depending on the
printer status.
6) Job Cancel button
1 Job Cancel / ALL Job Cancel
7) Go button
Wake-up / Error recovery / Form feed /
Reprint
LED is off.
The LED is dimmed.
or or
LED is on.
or or
LED is blinking.