User Manual
Table Of Contents
- USER'S GUIDE HL-5340D / HL-5350DN / HL-5370DW
- Using this guide
- Safety precautions
- Trademarks
- Compilation and Publication Notice
- Shipment of the Printer
- Table of Contents
- 1 About this Printer
- 2 Printing Methods
- 3 Driver and Software
- Printer driver
- Features in the printer driver (for Windows®)
- Basic tab
- Paper Size
- Orientation
- Copies
- Media Type
- Resolution
- Print Setting
- Multiple Page
- Duplex / Booklet
- Paper Source
- Advanced tab
- Scaling
- Reverse Print
- Use Watermark
- Header-Footer Print
- Toner Save Mode
- Administrator
- Other Print Options...
- Use Reprint
- Sleep Time
- Macro
- Page Protection
- Density Adjustment
- Error Message Printout
- Improve Print Output
- Accessories tab
- Support
- Status Monitor
- Using the BR-Script3 printer driver (PostScript® 3™ language emulation for Windows®)
- Features in the printer driver (for Macintosh)
- Features in the printer driver (for Windows®)
- Using the BR-Script3 printer driver (Post Script® 3™ language emulation for Macintosh)
- Uninstalling the printer driver
- Software
- Printer driver
- 4 Control Panel
- 5 Options
- 6 Routine Maintenance
- 7 Troubleshooting
- Appendix A
- Printer specifications
- Symbol and character sets
- Quick reference for bar code control commands
- Print bar codes or expanded characters
- Definition of parameters
- Bar code mode
- Bar code, expanded character, line block drawing and box drawing
- Bar code
- Bar code human readable line ON or OFF
- Quiet zone
- Bar code, expanded character unit, line block drawing and box drawing
- Bar code, expanded character, line block drawing and box drawing offset in X-axis
- Bar code & expanded character offset in Y-axis
- Bar code, expanded character, line block drawing and box drawing height
- Expanded character width, line block drawing and box drawing
- Expanded character rotation
- Bar code data start
- Box drawing
- Line block drawing
- Expanded character data start
- Print bar codes or expanded characters
- Appendix B (for Europe and Other Countries)
- Appendix C (for USA and Canada)
- Index
Control Panel
78
4
Receiving data
The printer is either receiving data from the computer, processing data in memory
or printing the data.
The Status LED will turn on for 0.5 seconds and off for 0.5 seconds.
Cooling down
The printer is cooling down. Wait for a few seconds until inside of the printer has
cooled down.
The Status LED will turn on for 1 second and off for 1 second.
Data remaining in memory
There is remaining print data in the printer memory. If the yellow Status LED is on
for a long time and nothing has printed, press Go to print the remaining data in
memory.
Toner low
Indicates that the toner cartridge is near the end of its life. Buy a new toner cartridge
and have it ready for when Replace Toner is indicated.
The Toner LED will turn on for 2 seconds and off for 3 seconds.
Replace toner
Replace the toner cartridge with a new one. See Replacing the toner cartridge on
page 95.
Cartridge error
The drum unit assembly is not installed correctly. Take the drum unit out of the
machine and put it back in.
No toner
Open the front cover, install the toner cartridge. See Toner cartridge on page 94.
LED Printer status