Command Reference Guide for Software Developers
Table Of Contents
- Technical Reference Guide
- TABLE OF CONTENTS
- GLOSSARY
- CHAPTER 1 INTRODUCTION
- CHAPTER 2 PCL PRINTER CONTROL LANGUAGE
- 1. COMMAND LIST
- 2. INTRODUCTION
- 3. CONTROLLING THE PRINTER
- 4. JOB CONTROL
- 4.1 . Commands
- 4.1.1. Page size
- 4.1.2. Media type selection
- 4.1.3. Output tray
- 4.1.4. Paper source
- 4.1.5. Left long-edge offset registration
- 4.1.6. Top offset registration
- 4.1.7. Simplex/duplex printing
- 4.1.8. Paper side selection
- 4.1.9. Job separation command
- 4.1.10. Reset
- 4.1.11. Reset to factory default settings
- 4.1.12. Reset to user settings
- 4.1.13. Printer self test
- 4.1.14. Exit current emulation mode
- 4.1.15. Change emulation mode
- 4.2. The Page
- 4.2.1. Physical page
- 4.2.2. Printable area
- 4.2.3. Logical page
- 4.2.4. Text area
- 4.2.5. HP-GL/2 graphics window
- 4.2.6. Portrait page dimensions
- 4.2.7. Landscape page dimensions
- 4.2.8. Coordinates
- 4.2.9. Units
- 4.2.10. Unit of measure
- 4.2.11. Setting the left and right margins
- 4.2.12. Resetting the horizontal margins
- 4.2.13. Setting the top margin
- 4.2.14. Setting the vertical motion index (VMI)
- 4.2.15. Setting the horizontal motion index (HMI)
- 4.2.16. Setting line spacing
- 4.2.17. Text length
- 4.2.18. Page length
- 4.2.19. Perforation skip
- 4.2.20. Positioning the cursor
- 4.2.21. Vertical positioning
- 4.2.22. Horizontal position
- 4.2.23. Positioning the cursor using control codes
- 4.2.24. Using the cursor position stack
- 4.2.25. Half line feed
- 4.2.26. Logical page orientation
- 4.2.27. Text direction
- 4.1 . Commands
- 5. USING FONTS
- 5.1. Introduction
- 5.1.1. Font types
- 5.1.2. Bitmap fonts
- 5.1.3. Scalable fonts
- 5.1.4. Bound fonts
- 5.1.5. Unbound fonts
- 5.1.6. Font sources
- 5.1.7. Internal fonts
- 5.1.8. Card/cartridge fonts
- 5.1.9. Downloadable fonts
- 5.1.10. Primary and secondary fonts
- 5.1.11. Specifying the primary font
- 5.1.12. Specifying the secondary font
- 5.1.13. Selecting the default fonts
- 5.1.14. Switching between the primary and secondary fonts
- 5.1.15. Criteria for font selection
- 5.1.16. Symbol set
- 5.1.17. Symbol collections
- 5.1.18. Type of character spacing
- 5.1.19. Pitch
- 5.1.20. Height
- 5.1.21. Style
- 5.1.22. Stroke weight
- 5.1.23. Typeface
- 5.2. Font Selection Commands
- 5.2.1. User-defined symbol sets
- 5.2.2. Symbol set ID code command
- 5.2.3. Define symbol set
- 5.2.4. Symbol set control command
- 5.2.5. Selecting the symbol set
- 5.2.6. Selecting the type of character spacing
- 5.2.7. Selecting the pitch
- 5.2.8. Selecting the height
- 5.2.9. Scaling the scalable fonts vertically or horizontally
- 5.2.10. Selecting the style
- 5.2.11. Selecting the stroke weight
- 5.2.12. Selecting the typeface
- 5.2.13. Font orientation
- 5.2.14. Transparent print data
- 5.2.15. Esc&d#D (27)(38)(100)#(68) <1Bh><26h><64h>#<44h>
- 5.3. Downloadable font manipulation
- 5.4. Creating Downloadable Fonts
- 5.1. Introduction
- 6. USING GRAPHICS
- 6.1. Source, Pattern and Destination
- 6.2. Plotting Rectangles
- 6.3. Raster Graphics
- 6.3.1. Positioning the cursor
- 6.3.2. Set raster resolution
- 6.3.3. Set high resolution control
- 6.3.4. Set raster image orientation
- 6.3.5. Set raster area height
- 6.3.6. Set raster area width
- 6.3.7. Set raster y-offset
- 6.3.8. Set compression mode
- 6.3.9. Start raster transfer
- 6.3.10. Send raster data
- 6.3.11. Compress transfer graphics
- 6.3.12. End raster transfer
- 6.3.13. Horizontal 1200-dpi image format mode (Raster Graphic Mode 1027)
- 6.4. Vector Graphics
- 6.5. The Picture Frame
- 7. MACROS
- 7.1. The Purpose of a Macro
- 7.2. Defining a Macro
- 7.3. Running a Macro
- 7.4. Handling Macros
- 7.4.1. Delete all macros
- 7.4.2. Delete all temporary macros
- 7.4.3. Delete macro
- 7.4.4. Make macro temporary
- 7.4.5. Make macro permanent
- 7.4.6. Delete all macros from the storage device
- 7.4.7. Delete macro from the storage device
- 7.4.8. Save macro into the storage device
- 7.4.9. Execute data
- 7.4.10. AppleTalk configuration
- 7.4.11. MIO video I/O port control
- 8. STATUS READBACK
- 8.1. Introduction
- 8.2. Memory Status request
- 8.3. Entity Status
- 8.4. Status Response
- 8.5. Status Response Syntax
- 8.5.1. Set status readback location type
- 8.5.2. Set status readback location unit
- 8.5.3. Inquire status readback entity
- 8.5.4. Entity status response
- 8.5.5. Font response
- 8.5.6. Bitmap fonts
- 8.5.7. Bound scalable fonts
- 8.5.8. Unbound scalable fonts
- 8.5.9. Download fonts
- 8.5.10. Location type 1 (currently selected) font
- 8.5.11. Font extended response
- 8.5.12. Macro response
- 8.5.13. Use-defined pattern response
- 8.5.14. Symbol set response
- 8.5.15. Entity error codes
- 8.5.16. Free space command
- 8.5.17. Font cache
- 8.5.18. Memory status response
- 8.5.19. Memory error response
- 8.5.20. Flush all pages command
- 8.5.21. Echo command
- 9. INDEX
- CHAPTER 3 PCL5C
- CHAPTER 4 HP-GL/2 GRAPHICS LANGUAGE
- CHAPTER 5 PJL PRINTER JOB LANGUAGE
- 1. INTRODUCTION
- 2. HOW TO USE PJL
- 3. COMMAND GROUP
- 4. KERNEL COMMANDS
- 5. JOB SEPARATION COMMANDS
- 6. ENVIRONMENT COMMANDS
- 7. STATUS READBACK COMMANDS
- 8. DEVICE ATTENDANCE COMMANDS
- 9. INDEX
- CHAPTER 6 EPSON FX-850
- CHAPTER 7 IBM PROPRINTER XL
- CHAPTER 8 BAR CODE CONTROL
- 1. INTRODUCTION
- 2. PRINT BAR CODES OR EXPANDED CHARACTERS
- 3. DEFINITION OF PARAMETERS
- 3.1. Bar Code Mode
- 3.2. Bar Code Style, Expanded Character Shading, Line Block Drawing & Box Drawing Shading
- 3.3. Bar Code Scaling (Width only)
- 3.4. Bar Code Human Readable Line On or Off
- 3.5. Quiet Zone
- 3.6. Bar Code, Expanded Character Unit, Line Block Drawing & Box Drawing Units
- 3.7. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Offset in the X-axis
- 3.8. Bar Code & Expanded Character Offset in the Y-axis
- 3.9. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Height
- 3.10. Expanded Character, Line Block Drawing & Box Drawing Width
- 3.11. Expanded Character Rotation
- 3.12. Bar Code Data Start
- 3.13. Box Drawing
- 3.14. Line Block Drawing
- 3.15. Expanded Character Data Start
- 3.16. Table of Code(EAN) 128 set C
- 4. EXAMPLE PROGRAM LISTINGS
- CHAPTER 9 HP-GL GRAPHICS LANGUAGE
- CHAPTER 10 CARBON COPY FUNCTION
- APPENDIX A COMPARISON LIST
- APPENDIX B FLASH/PCMCIA CARD COMMANDS
- APPENDIX C HBP MODE COMMANDS
- APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS
- APPENDIX E REFERENCE LIST OF FS-5050 UNIQUE COMMANDS
- APPENDIX F REFERENCE LIST OF SF- 4000 SERIES UNIQUE COMMANDS
Variables Descri
p
tion Sam
p
le Value Ran
g
e
ANY
,
LETTER
,
LEGAL
,
A4
,
EXECUTIVE
,
JISB5
,
A5
,
A5L
,
FOLIO
(
HL-S7000DN
)
ANY, LETTER, LEGAL, A4, EXECUTIVE, JISB5, A5, A6, FOLIO, POSTCARD, A5L, JISB6 (HL-3140CW/HL-3150CDW/HL-
3
1
50C
DN
/
HL-
3
17
0C
DW
)
LETTER, LEGAL, A4, EXECUTIVE, JISB5, A5, A6, FOLIO, POSTCARD, A5L, JISB6, ROC16K, SIXTEENK195X270,
SIXTEENK184X260(HL-
L8250CDN/L8350CDW(T)/L9200CDW(T)/L9300CDW(T)/L8260CDN/L8260CDW/L8360CDW(T)/L9310CDW/L2300/L2300D/L2320D/L2
321D/2260/2260D/L2305W/L2340DW/L2360DN/L2361DN/2560DN/L2360DW/L2365DW/L2366DW/2569DW)
LETTER, LEGAL, A4, EXECUTIVE, JISB5, B5, A5, FOLIO, A5L, ROC16K, SIXTEENK195X270, SIXTEENK184X260 (HL-
1212W/1210W/1210WR/1212WR/1210WE/1211W/1218W)
LETTER, LEGAL, MEXICANLEGAL, INDIALEGAL, A4, EXECUTIVE, JISB5, A5, JISB5, A5, POSTCARD, FOLIO, A5L, ROCK16K,
SIXTEENK195X270, SIXTEENK184X260 (HL-
L5000D/5580D/5585D/5595DN/L5102DW/L5100DN(T)/5590DN/L5200DW(T)/L5202DW/L6200DW(T)/L6202DW/L6250DN/L6250DW/L
6300DW(T)/L6400DW(T)/L6402DW)
LETTER, LEGAL, MEXICANLEGAL, INDIALEGAL, A4, EXECUTIVE, JISB5, A5, JISB5, A5, POSTCARD, FOLIO, A5L,
SIXTEENK195X270 (HL-
L2385DW/L2386DW/2595DW/L2370DW/L2370DWXL/L2375DW/L2375DWR/L2376DW/B2080DW/L2370DN/L2370DNR/L2371DN/L23
72DN/2590DN/B2050DN/2290/L2310D/L2312D/L2310DR/L2330D/L2331D/L2336D/L2335D/2295D/B2000D/L2325DW/L2350DW/L235
0DWR//L2357DW/L2352DW/L2351DW)
LETTER, LEGAL, MEXICANLEGAL, INDIALEGAL, A4, B5, EXECUTIVE, JISB5, A5, A6, POSTCARD, FOLIO, A5L,
SIXTEENK195X270(HL-L3270CDW/3190CDW/L3230CDW/3160CDW/L3230CDN/L3210CW)
Selects the paper size in Tray3. LETTER, LEGAL, EXECUTIVE, A3, A4, B5, A5, A6, COM10, C5, DL, MONARCH, LEDGER, JISB4, LTRS, A4S, EXECUTIVES, B5S
(HL-3260N)
Selects the paper size in Tray2 (HL-
7050/6050/6050D/6050DN/5240/5250DN/5270DN/5280DW/5340D/5350
DN/5370DW/5380DN/4140CN/4150CDN/4570CDW/S7000DN).
A4, LETTER, B5, EXECUTIVE, ENVELOPES, LEGAL, A5, B6, A6, A4LONG, NO CASSETTE (HL-2460)
A4LETTER
,
B5EXECUTIVE
,
ENVELOPES
,
LEGAL
,
A5
,
B6
,
A6
,
A4LONG
,
NOCASSETTE
(
HL-7050
)
A4LETTER, B5EXECUTIVE, ENVELOPES, LEGAL, A5, B6, A6, A4, LETTER, JISB5, B5, EXECUTIVE, FOLIO, POSTCARD,
NOCASSETTE (HL-6050/6050D/6050DN)
LETTER
,
LEGAL
,
EXECUTIVE
,
A4
,
B5
,
A5
,
A6
,
JISB5
,
B6
,
COM10
,
C5
,
DL
,
MONARCH
(
HL-8050N
)
ANY, LETTER, LEGAL, A4, EXECUTIVE, JISB5, B5, A5, B6, FOLIO(HL-
5240/5250DN/5270DN/5280DW/5340D/5350DN/5370DW/5380DN
)
ANY
,
LETTER
,
LEGAL
,
A4
,
EXECUTIVE
,
JISB5
,
B5
,
A5
,
B6
,
FOLIO
,
JISB6
(
HL-4140CN/4150CDN/4570CDW
)
ANY, LETTER, LEGAL, A4, EXECUTIVE, JISB5, B5, A5, B6, A6, FOLIO, POSTCARD, A5L, ROC16K, SIXTEENK195X270,
SIXTEENK184X260 (HL-5440D/5450DN/5470DW/6180DW)
ANY
,
LETTER
,
LEGAL
,
A4
,
EXECUTIVE
,
JISB5
,
A5
,
FOLIO
(
HL-S7000DN
)
LETTER, LEGAL, A4, EXECUTIVE, JISB5, A5, FOLIO, JISB6, ROC16K, SIXTEENK195X270, SIXTEENK184X260(HL-
L8250CDN/L8350CDW(T)/L9200CDW(T)/L9300CDW(T))/L8260CDN/L8260CDW/L8360CDW(T)/L9310CDW/
LETTER, LEGAL, MEXICANLEGAL, INDIALEGAL, A4, EXECUTIVE, JISB5, A5, FOLIO, ROCK16K, SIXTEENK195X270,
SIXTEENK184X260 (HL-
L5000D/5580D/5585D/5595DN/L5102DW/L5100DN(T)/5590DN/L5200DW(T)/L5202DW/L6200DW(T)/L6202DW/L6250DN/L6250DW/L
6300DW(T)/L6400DW(T)/L6402DW)
Selects the
p
a
p
er size in Tra
y
4. LETTER
,
LEGAL
,
EXECUTIVE
,
A3
,
A4
,
B5
,
A5
,
A6
,
COM10
,
C5
,
DL
,
MONARCH
,
LEDGER
,
JISB4
,
LTRS
,
A4S
,
XECUTIVES
,
B5SINTRAY4SIZE
INTRAY3SIZE
CHAPTER 5 PJL - 26