Command Reference Guide for Software Developers

CHAPTER 8 BAR CODE CONTROL - 2
CONTENTS
1. INTRODUCTION ................................................................................................................... 3
2. PRINT BAR CODES OR EXPANDED CHARACTERS ........................................................ 4
3. DEFINITION OF PARAMETERS .......................................................................................... 5
3.1. Bar Code Mode ............................................................................................................................ 5
3.2. Bar Code Style, Expanded Character Shading, Line Block Drawing & Box Drawing Shading .... 5
3.3. Bar Code Scaling (Width only) ..................................................................................................... 7
3.4. Bar Code Human Readable Line On or Off .................................................................................. 7
3.5. Quiet Zone ................................................................................................................................... 7
3.6. Bar Code, Expanded Character Unit, Line Block Drawing & Box Drawing Units ......................... 7
3.7. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Offset in the X-axis ......... 8
3.8. Bar Code & Expanded Character Offset in the Y-axis ................................................................. 8
3.9. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Height ............................. 8
3.10. Expanded Character, Line Block Drawing & Box Drawing Width ............................................. 8
3.11. Expanded Character Rotation .................................................................................................. 8
3.12. Bar Code Data Start ................................................................................................................. 9
3.13. Box Drawing ........................................................................................................................... 10
3.14. Line Block Drawing ................................................................................................................. 10
3.15. Expanded Character Data Start ............................................................................................. 10
3.16. Table of Code(EAN) 128 set C ............................................................................................... 11
4. EXAMPLE PROGRAM LISTINGS ...................................................................................... 12