User Manual

75
General Information
3
Cover is Open
Close the front cover of the machine.
Log Access Error
The machine could not access the print log file in the server. Contact your
administrator to check the Store Print Log to Network settings.
Out of Memory
Reduce the complexity of your document or reduce the print resolution.
Add more memory.
(See Installing extra memory uu page 90.)
Access Denied
Printing is restricted by Secure Function Lock 2.0.
Contact your administrator to check your Secure Function Lock Settings.
Limit Exceeded
The number of pages you are allowed to print has been exceeded. The print job
will be cancelled.
Contact your administrator to check your Secure Function Lock Settings.
DIMM Error
The DIMM (Dual In-Line Memory Module) is not installed correctly. Or the DIMM
is broken or does not meet the required specifications.
Turn off the machine and remove the DIMM.
(See Installing extra memory uu page 90.)
Confirm that the DIMM meets the required specifications.
(For details, see SO-DIMM types uu page 89.)
Re-install the DIMM correctly. Wait a few seconds, and then turn the machine
on again.
If this indication continues, replace the DIMM with a new one.
(See Installing extra memory uu page 90.)
LEDs Machine Status