Product Safety Guide
Table Of Contents
- Product Safety Guide
- Using the Documentation
- Compilation and Publication
- Choosing a location
- To use the product safely
- Regulation
- Standard telephone and FCC notices (MFC only)
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- RF Exposure Notice (USA or Canada only) (Wireless models only)
- Wireless connection (Mexico only)
- Industry Canada Compliance Statement (Canada only)
- EQUIPMENT ATTACHMENT LIMITATIONS (Canada only) (MFC only)
- Laser safety (For 110-120V Models Only)
- FDA regulations (For 110-120V Models Only)
- For use in the USA or Canada only
- LAN connection (Network models only)
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Other Information
- Legal limitations for copying (Products with scanning function only)
17
Federal Communications Commission (FCC) Declaration of
Conformity (USA only) A
declares, that the products
Product Name: Mono Laser Printer
Model Numbers: HL-L2300D / HL-L2305W / HL-L2315DW / HL-L2320D / HL-L2340DW /
HL-L2360DW
Product Name: Multi Function Printer
Model Numbers: HL-L2380DW / DCP-L2520DW / DCP-L2540DW / MFC-L2680W /
MFC-L2685DW / MFC-L2700DW / MFC-L2705DW / MFC-L2707DW / MFC-L2720DW /
MFC-L2740DW
comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Call the dealer or an experienced radio/TV technician for help.
(Wireless network models only)
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
IMPORTANT
• Changes or modifications not expressly approved by Brother Industries, Ltd. could void the
user’s authority to operate the equipment.
• A shielded interface cable should be used to ensure compliance with the limits for a Class B
digital device.
Responsible Party: Brother International Corporation
200 Crossing Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: (908) 704-1700