Service manual

2-45
Confidential
 Error code C700
There is insufficient memory to expand PC print data.
 Error code E000
An error occurred in the ROM check sum.
Error code E100
Program error
 Error code E500
An error occurred during access to the DRAM in the main PCB ASSY.
Error code E600
Write error in the EEPROM of the main PCB ASSY
Error code E702
Read error in the flash ROM on the main PCB
Out of Memory
Press Go for 2 seconds.
<User Check>
• Print the print data stored in the memory.
• Divide the print data and print them separately.
Step Cause Remedy
1
Main PCB failure Replace the main PCB ASSY.
Print Unable E0
Turn off and on.
Print Unable E1
Turn off and on.
<User Check>
• Install the latest firmware.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Print Unable E5
Turn the power off and then back on again.
Print Unable E6
Turn the power off and then back on again.
Machine Error E7
Turn the power off and then back on again.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.