User Manual
Table Of Contents
- Online User's Guide HL-L2312D/HL-L2357DW/HL-L2352DW/HL-L2372DN/HL-L2375DW
- Table of Contents
- Before You Use Your Brother Machine
- Introduction to Your Brother Machine
- Paper Handling
- Network
- Supported Basic Network Features
- Network Management Software and Utilities
- Additional Methods of Configuring Your Brother Machine for a Wireless Network
- Before Configuring Your Brother Machine for a Wireless Network
- Configure Your Machine for a Wireless Network
- Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
- Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
- Use Wi-Fi Direct®
- Print from Your Mobile Device Using Wi-Fi Direct
- Configure Your Wi-Fi Direct Network
- Wi-Fi Direct Network Configuration Overview
- Configure Your Wi-Fi Direct Network Using the One-Push Method
- Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Using the PIN Method
- Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Manually
- Advanced Network Features
- Technical Information for Advanced Users
- Security
- Lock the Machine Settings
- Network Security Features
- Before Using Network Security Features
- Manage Your Network Machine Securely Using SSL/TLS
- Introduction to SSL/TLS
- Certificates and Web Based Management
- Supported Security Certificate Features
- Create and Install a Certificate
- Manage Multiple Certificates
- Manage Your Network Machine Securely Using Web Based Management
- Manage Your Network Machine Securely Using BRAdmin Professional (Windows)
- Print Documents Securely Using SSL/TLS
- Send an Email Securely
- Mobile
- Brother iPrint&Scan for Windows and Mac
- Troubleshooting
- Routine Maintenance
- Machine Settings
- Appendix
LED Indication Status Monitor Cause Action
Drum ! The corona wire on the drum
unit must be cleaned.
Clean the corona wire on the
drum unit.
The drum unit or the toner
cartridge and drum unit
assembly is not installed
correctly.
Remove the toner cartridge and
drum unit assembly, remove the
toner cartridge from the drum
unit, and reinstall the toner
cartridge back into the drum unit.
Reinstall the toner cartridge and
drum unit assembly into the
machine.
If the problem continues, replace
the drum unit with a new one.
Replace Drum
It is time to replace the drum
unit.
Replace the drum unit with a new
one.
The drum unit counter was
not reset when the previous
drum was removed.
Reset the drum unit counter.
Cover is Open The front cover is not
completely closed.
Open and then firmly close the
front cover of the machine.
The fuser cover is not
completely closed or paper
was jammed in the back of
the machine when you turned
on the power.
• Close the fuser cover located
inside the back cover of the
machine.
• Make sure paper is not
jammed inside the back cover
of the machine, and then
close the fuser cover.
2-sided Disabled
(For automatic 2-
sided printing
models)
The back cover of the
machine is not closed
completely.
Close the back cover of the
machine until it locks in the
closed position.
The 2-sided tray is not
installed completely.
Install the 2-sided tray firmly in
the machine.
Jam 2-sided
(For automatic 2-
sided printing
models)
The paper is jammed
underneath the 2-sided tray
or the fuser unit.
Clear the Jam in the 2-sided tray
or the fuser unit.
Jam Inside The paper is jammed inside
the machine.
Open the front cover, remove the
drum and toner, and clear the
paper jam.
Jam Rear The paper is jammed in the
back of the machine.
Open the fuser cover and remove
all jammed paper. Close the fuser
cover.
Jam Tray The paper is jammed in the
paper tray.
Pull the paper tray out
completely, open the front cover
and fuser cover to remove all
jammed paper.
Out of Memory The machine's memory is
full.
Reduce the print resolution.
Size Error DX
(For automatic 2-
sided printing
models)
The paper size specified in
the printer driver is not
available for automatic 2-
sided printing.
Press Go. Choose a paper size
which is supported by the duplex
tray.
155