User Manual

Level 1 Level 2 Description
(For automatic 2-sided
printing models)
Single
Image
For a print job where the last page is a 1-sided image, select the 1-
sided Feed option to reduce printing time.
Auto Continue
- Select if you want the machine to clear paper size errors or media type
errors automatically.
Print Position X Offset
Move the print start position (at the top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset
Move the print start position (at the top-left corner of pages) vertically up
to -500 (up) to +500 (down) dots in 300 dpi.
[Network] (HL-L2357DW/HL-L2352DW)
Level 1
Level 2 Level 3 Level 4 Descriptions
WLAN TCP/IP Boot
Method
- Choose the IP method that best suits your
needs.
IP Address
- Enter the IP address.
Subnet
Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Config
- Select the WINS configuration mode.
WINS
Server
Primary
Specify the IP address of the primary WINS
server.
Secondary
Specify the IP address of the secondary WINS
server.
DNS Server Primary
Specify the IP address of the primary DNS
server.
Secondary
Specify the IP address of the secondary DNS
server.
APIPA
- Allocate the IP address from the link-local
address range automatically
1
.
IPv6
- Enable or disable the IPv6 protocol.
Setup Wizard
- - Configure the wireless network settings using the
setup wizard.
WLAN Assistant
- - Configure your wireless network settings using
the Brother installation disc.
WPS
- - Configure your wireless network settings using
the one-button push method.
WPS w/PIN Code
- - Configure the wireless network settings using
WPS with a PIN code.
WLAN Status Status
- Display the wireless Ethernet link status.
Signal
- Display the signal condition.
Channel
- Display the channel in use when Status is
Active.
Speed
- Display the connection speed when Status is
Active.
SSID
- Display SSID.
Comm. Mode
- Display the current Communication mode.
MAC Address
- - Display the MAC address of the machine.
222