User Manual
Table Of Contents
- Online User's Guide HL-2595DW
- Table of Contents
- Before You Use Your Brother Machine
- Introduction to Your Brother Machine
- Paper Handling
- Network
- Supported Basic Network Features
- Network Management Software and Utilities
- Additional Methods of Configuring Your Brother Machine for a Wireless Network
- Before Configuring Your Brother Machine for a Wireless Network
- Configure Your Machine for a Wireless Network
- Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
- Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
- Use Wi-Fi Direct®
- Print from Your Mobile Device Using Wi-Fi Direct
- Configure Your Wi-Fi Direct Network
- Wi-Fi Direct Network Configuration Overview
- Configure Your Wi-Fi Direct Network Using the One-Push Method
- Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Using the PIN Method
- Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Manually
- Advanced Network Features
- Technical Information for Advanced Users
- Security
- Lock the Machine Settings
- Network Security Features
- Before Using Network Security Features
- Manage Your Network Machine Securely Using SSL/TLS
- Introduction to SSL/TLS
- Certificates and Web Based Management
- Supported Security Certificate Features
- Create and Install a Certificate
- Manage Multiple Certificates
- Manage Your Network Machine Securely Using Web Based Management
- Manage Your Network Machine Securely Using BRAdmin Professional (Windows)
- Print Documents Securely Using SSL/TLS
- Send an Email Securely
- Mobile
- Brother iPrint&Scan for Windows and Mac
- Troubleshooting
- Routine Maintenance
- Machine Settings
- Appendix
Home > Machine Settings > Change Machine Settings from the Control Panel > Menu Table (for LCD
Models) > Settings Tables
Settings Tables
Use these tables to understand the various menus and options that you will use to set your preferences on the
machine.
[General Setup]
Level 1
Level 2 Level 3 Description
Tray Setting Paper Type MP Tray
Select the paper type that matches the paper in the MP tray.
Tray1
Select the paper type that matches the paper in the standard
paper tray.
Paper Size MP Tray
Select the size of paper you loaded in the MP tray.
Tray1
Select the size of paper you loaded in the standard paper
tray.
Paper Low
Notice
Notification
Select whether to display a message telling you that the
paper tray is nearly empty.
Notice Level
Select the minimum paper level that will trigger the message.
Check Size
- Select whether to display a message telling you to check that
the size of the paper in the machine and the machine's Paper
Size setting match.
Tray Use
- Select the tray that will be used.
Priority
- When Auto is selected in Tray Use, select the order in
which the machine uses paper trays that contain paper of the
same size.
Resolution
- - Choose a print resolution.
Density
- - Increase or decrease the print density.
Ecology Eco Mode
- Turn the following machine settings on at the same time.
• 2-sided Print: Long Edge(Available only for certain
models)
• Sleep Time:0Min
Toner Save
- Increase the page yield of the toner cartridge.
Sleep Time
- Set how much time will pass before the machine enters
Power Saving mode.
Quiet Mode
- Decrease printing noise.
Auto Power
Off
- Set the number of hours that the machine will remain in Deep
Sleep mode before going into Power Off mode.
Panel Control Button
Repeat
-
Set the time for the LCD message to change when holding a
or b at intervals.
Message
Scroll
- Set the time in seconds that an LCD message will scroll
across the LCD. From Level 1=0.2 sec to Level 10=2.0 sec.
LCD Contrast
- Adjust the contrast of the LCD.
Auto Online
- Set the machine to return to Ready mode after it has been
idle for 30 seconds.
Setting Lock
- - Lock your machine’s settings using the Setting Lock
password.
Interface Select
- Select the interface to use.
If you select Auto, the machine changes the interface to USB
or Network depending on which interface is receiving data.
209