User Manual

Level 1 Level 2 Level 3 Description
Interface Auto IF Time
- Set the time-out period for the auto interface selection.
Input Buffer
- Increase or decrease the input buffer capacity.
Replace Toner
- - Sets the machine to continue printing after the LCD displays
Replace Toner.
[Printer]
Level 1
Level 2 Description
Emulation
- Choose the emulation mode.
Print Options Font List
Print the font list and samples.
Test Print
Print a test page.
2-sided
(For automatic 2-sided
printing models)
2-sided
Print
Turn 2-sided printing off or on and select flip on long edge or short
edge.
Single Image
For a print job where the last page is a 1-sided image, select the 1-
sided Feed option to reduce printing time.
Auto Continue
- Select if you want the machine to clear paper size errors or media type
errors automatically.
Paper Type
- Set the type of paper.
Paper Size
- Set the size of paper.
Copies
- Set the number of printed pages.
Orientation
- Set pages to print in either portrait or landscape orientation.
Print Position X Offset
Move the print start position (at the top-left corner of pages)
horizontally up to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset
Move the print start position (at the top-left corner of pages) vertically
up to -500 (up) to +500 (down) dots in 300 dpi.
Auto FF
- Allow the machine to print any remaining data automatically.
HP LaserJet Font No.
Set the font number.
Font Pitch
Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018,
I031 to I037 or I097 to I109 in Font No. setting.
Font Point
Set the font size.
The Font Point menu appears when you choose I000 to I011,
I019 to I030 or I038 to I096 in Font No. setting.
Symbol Set
Select the symbol or character set.
Table Print
Print the code table.
Auto LF
ON: CR -> CR+LF, OFF: CR -> CR
Auto CR
ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto WRAP
Choose whether a line feed and carriage return will happen when the
machine reaches the right margin.
Auto SKIP
Choose whether a line feed and carriage return will happen when the
carriage position reaches the bottom margin.
Left Margin
Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin
Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin
Set the top margin distance from the top edge of the paper.
Bottom
Margin
Set the bottom margin distance from the bottom edge of the paper.
210