User Manual

Level 1 Level 2 Level 3 Description
Panel Control Button
Repeat
- Set the time for the LCD message to change when
holding a or b at intervals.
Message
Scroll
- Set the time in seconds that an LCD message will
scroll across the LCD. From Level 1=0.2 sec to Level
10=2.0 sec.
LCD Contrast
- Adjust the contrast of the LCD.
Auto Online
- Set the machine to return to Ready mode after it has
been idle for 30 seconds.
Setting Lock
- - Lock your machine’s settings using the Setting Lock
password.
Interface Select
- Select the interface to use.
If you select Auto, the machine changes the interface
to USB or Network depending on which interface is
receiving data.
Auto IF Time
- Set the time-out period for the auto interface selection.
Input Buffer
- Increase or decrease the input buffer capacity.
Replace Toner
- - Sets the machine to continue printing after the LCD
displays Replace Toner.
[Printer]
For Printer Emulation Supported models
Level 1
Level 2 Description
Emulation
- Choose the emulation mode.
Print Options Font List
Print the font list and samples.
Test Print
Print a test page.
2-sided
(For automatic 2-sided
printing models)
2-sided
Print
Turn 2-sided printing off or on and select flip on long edge or short
edge.
Single Image
For a print job where the last page is a 1-sided image, select the 1-
sided Feed option to reduce printing time.
Auto Continue
- Select if you want the machine to clear paper size errors or media type
errors automatically.
Paper Type
- Set the type of paper.
Paper Size
- Set the size of paper.
Copies
- Set the number of printed pages.
Orientation
- Set pages to print in either portrait or landscape orientation.
Print Position X Offset
Move the print start position (at the top-left corner of pages)
horizontally up to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset
Move the print start position (at the top-left corner of pages) vertically
up to -500 (up) to +500 (down) dots in 300 dpi.
Auto FF
- Allow the machine to print any remaining data automatically.
HP LaserJet Font No.
Set the font number.
Font Pitch
Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018,
I031 to I037 or I097 to I109 in Font No. setting.
Font Point
Set the font size.
The Font Point menu appears when you choose I000 to I011,
I019 to I030 or I038 to I096 in Font No. setting.
236