User Manual

DCP-L2512D/DCP-L2537DW/DCP-L2532DW/DCP-L2552DN/MFC-L2712DN/
MFC-L2712DW
1. Load your document.
2. Do one of the following:
• For MFC models
Press
(COPY).
Use the dial pad to enter the number of copies you want.
• For DCP models
Press a or b to enter the number of copies you want.
3. Do one of the following:
• Press 2-sided.
• Press Options or Copy/Scan Options.
Press a or b to select [2-sided], and then press OK.
4. Press a or b to display [Layout Long] or [Layout Short], and then press OK.
5. Select flip on long edge or flip on short edge, and then press OK.
6. Press a or b to display [2sided → 2sided] or [1sided → 2sided], and then press OK.
NOTE
For DCP-L2512D/DCP-L2537DW/DCP-L2532DW/DCP-L2552DN/MFC-L2712DN/MFC-L2712DW
If you select [2sided → 2sided], you cannot use the ADF. Use the scanner glass.
7. Press Start.
If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step.
8. Repeat the following steps for each page of the layout:
• For MFC models
After the machine scans the page, place the next page on the scanner glass, and then press a to scan
the page.
• For DCP models
After the machine scans the page, place the next page on the scanner glass, and then press a to select
the [Yes] option.
9. Press b to select the [No] option.
MFC-L2732DW/MFC-L2750DW/MFC-L2752DW
1. Load your document.
2. Press
([Copy]).
3. Enter the number of copies.
4. Press [Options].
5. Press a or b to display the [2-sided Copy] option, and then press [2-sided Copy].
6. Press a or b to display the layout options, and then press the option you want.
NOTE
For MFC-L2732DW
If you select [2-sided -> 2-sided], you cannot use the ADF. Use the scanner glass.
162