User Manual

Table Of Contents
Error Message Cause Action
The drum unit or the toner cartridge
and drum unit assembly is not
installed correctly.
Put the toner cartridge in the drum
unit. Then reinstall the toner cartridge
and drum unit assembly in the
machine.
Drum End Soon
The drum unit is near the end of its
life.
Order a new drum unit before you get
the Replace Drum message.
Jam 2-sided
The paper is jammed in the 2-sided
paper tray.
Pull the paper tray and the 2-sided
tray out completely, open the back
cover and then remove all jammed
paper. Close the back cover, and put
the paper tray and the 2-sided tray
firmly back in the machine.
Jam Inside
The paper is jammed inside the
machine.
Open the front cover and remove the
toner cartridge and drum unit
assembly. Pull out all jammed paper.
Close the front cover. If the error
message remains, press Start.
Jam Rear
The paper is jammed in the back of
the machine.
Open the fuser cover and remove all
jammed paper. Close the fuser cover.
If the error message remains, press
Start.
Jam Tray
The paper is jammed in the indicated
paper tray.
Pull the paper tray out completely and
remove all jammed paper. Put the
paper tray firmly back in the machine.
Manual Feed
Manual was selected as the paper
source in the printer driver, but there
is no paper in the manual feed slot.
Place paper in the manual feed slot.
No Caller ID
There is no incoming call history. You
did not receive calls or you have not
subscribed to the Caller ID service
from your telephone company.
If you want to use the Caller ID
feature, call your telephone company.
No Paper
The machine is out of paper, or paper
is not loaded correctly in the paper
tray.
Refill paper in the paper tray.
Make sure the paper guides are
set to the correct size.
If paper is in the tray, remove it
and load it again. Make sure the
paper guides are set to the correct
size.
Do not overfill the paper tray.
No Response/Busy
The number you dialed does not
answer or is busy.
Verify the number and try again.
No Toner
The toner cartridge or the toner
cartridge and drum unit assembly is
not installed correctly.
Remove the toner cartridge and drum
unit assembly. Remove the toner
cartridge from the drum unit, and
reinstall the toner cartridge back in
the drum unit. Reinstall the toner
cartridge and drum unit assembly
back in the machine. If the problem
448