User Manual

Table Of Contents
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables (2 Line LCD MFC models)
Settings Tables (2 Line LCD MFC models)
Related Models: MFC-L2712DN/MFC-L2712DW
[General Setup]
Level 1
Level 2 Level 3 Descriptions
Default Mode
- - Select the default mode.
Mode Timer
- - Set the idle time before the machine returns to the default mode.
Tray Setting Paper Type
- Set the type of paper in the paper tray.
Paper Size
- Set the size of paper in the paper tray.
Check Size
- Select whether to display a message telling you to check that the
size and type of the paper in the machine and the machine's Paper
Size and Paper Type settings match.
Volume Ring
- Adjust the ring volume.
Beep
- Adjust the beeper volume.
Speaker
- Adjust the speaker volume.
Ecology Eco Mode
- Turn the following machine settings on at the same time.
2-sided Print:Long Edge (Available only for certain models)
Sleep Time:0Min
Toner Save
- Increase the page yield of the toner cartridge.
Sleep Time
- Set the number of minutes before the machine enters Sleep mode.
Quiet Mode
- Decrease printing noise.
Auto Power
Off
- Set the number of hours that the machine will remain in Deep Sleep
mode before going into Power Off mode.
LCD Contrast
- - Adjust the LCD contrast.
Security TX Lock
- Prohibit most operations except receiving faxes.
Setting Lock
- Restrict unauthorised users from changing the machine’s settings.
Replace Toner
- - Set the machine to continue printing after the LCD displays Replace
Toner.
[Fax]
Level 1
Level 2 Level 3 Descriptions
Setup Receive Receive Mode
- Select the receive mode that best suits your needs.
Ring Delay
- Set the number of rings before the machine answers in Fax or
Fax/Tel mode.
F/T Ring Time
- Set the length of the pseudo/double-ring time in Fax/Tel mode.
Fax Detect
- Receive fax messages automatically when you answer a call
and hear fax tones.
Remote Codes
- Answer calls at an extension or external telephone and use
codes to turn the Remote Codes on or off. You can personalise
the codes.
Auto Reduction
- Reduce the size of incoming faxes.
Fax Rx Stamp
- Print the received time and date on the top of received faxes.
2-sided
- Print received faxes on both sides of the paper.
568