Online User's Guide HL-L2390DW DCP-L2550DW HL-L2395DW MFC-L2690DW MFC-L2690DWXL MFC-L2710DW MFC-L2717DW MFC-L2730DW MFC-L2750DW MFC-L2750DWXL © 2019 Brother Industries, Ltd. All rights reserved.
Home > Table of Contents Table of Contents Before You Use Your Brother Machine ............................................................................................... 1 Definitions of Notes ........................................................................................................................................ 2 Notice - Disclaimer of Warranties (USA and Canada) ................................................................................... 3 Trademarks ..........................
Home > Table of Contents Scan to Email Attachment .................................................................................................................. 75 Scan to FTP ....................................................................................................................................... 78 Scan to Network (Windows) ...............................................................................................................
Home > Table of Contents Dial a Number Using Speed Dial ..................................................................................................... 231 Set up Groups for Broadcasting ....................................................................................................... 234 Dial Access Codes and Credit Card Numbers ................................................................................. 240 Telephone Services and External Devices............................................
Home > Table of Contents Online Services Used with Brother Web Connect ............................................................................ 391 Conditions for Using Brother Web Connect...................................................................................... 393 Set Up Brother Web Connect ........................................................................................................... 397 Scan and Upload Documents Using Brother Web Connect ......................................
Home > Table of Contents Set Dial Tone Detection.................................................................................................................... 490 Set Telephone Line Compatibility for Interference and VoIP Systems ............................................. 491 Network Problems...................................................................................................................................... 493 Error Messages for Network Problems ...................................
Home > Table of Contents Supplies ..................................................................................................................................................... 640 Brother Numbers........................................................................................................................................
Home > Before You Use Your Brother Machine Before You Use Your Brother Machine • Definitions of Notes • Notice - Disclaimer of Warranties (USA and Canada) • Trademarks • Important Note 1
Home > Before You Use Your Brother Machine > Definitions of Notes Definitions of Notes We use the following symbols and conventions throughout this User's Guide: WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
Home > Before You Use Your Brother Machine > Notice - Disclaimer of Warranties (USA and Canada) Notice - Disclaimer of Warranties (USA and Canada) BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER’S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE.
Home > Before You Use Your Brother Machine > Trademarks Trademarks BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd. Microsoft, Windows, Windows Server, SharePoint, Internet Explorer, PowerPoint, Excel, OneNote and OneDrive are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Mac, macOS, Safari, AirPrint, the AirPrint logo, iPad, iPhone and iPod touch are trademarks of Apple Inc.
Home > Before You Use Your Brother Machine > Important Note Important Note • Do not use this product outside the country of purchase as it may violate the wireless telecommunication and power regulations of that country. • Not all models are available in all countries. • Windows 10 in this document represents Windows 10 Home, Windows 10 Pro, Windows 10 Education and Windows 10 Enterprise. • Windows Server 2008 in this document represents Windows Server 2008 and Windows Server 2008 R2.
Home > Introduction to Your Brother Machine Introduction to Your Brother Machine • Control Panel Overview • Control Panel Overview • Touchscreen LCD Overview • How to Navigate the Touchscreen LCD • Settings Screen Overview • Access Brother Utilities (Windows) 6
Home > Introduction to Your Brother Machine > Control Panel Overview Control Panel Overview Related Models: HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW The control panel may vary depending on your model. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2390DW/DCP-L2550DW MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1 2 3 4 1. One Touch Buttons Store and recall up to eight fax and telephone numbers.
2-sided Press to copy on both sides of a sheet of paper. Options Press to access temporary settings for faxing, scanning, or copying. 3. Liquid Crystal Display (LCD) Displays messages to help you set up and use the machine. If the machine is in Fax Mode, the LCD displays: a 01/01 12:00AM Fax Only b a. Date & Time b. Receive Mode When you press COPY, the LCD displays: c d Stack Copies:01 100% □□■□□ Auto g f e c. Type of copy d. Number of copies e. Quality f. Contrast g. Copy ratio 4.
5. Menu Buttons Clear Press to delete entered data or cancel the current setting. Menu Press to access the Menu for programming your machine settings. OK Press to store your machine settings. d or c Press to scroll back or forward through menu selections. a or b • Press to scroll up or down through menus and options. • Press to change the resolution in Fax Mode. Press to access speed dial numbers. 6. Dial Pad • Use to dial fax and telephone numbers. • Use as a keyboard to enter text or characters.
1. Power On/Off . • Turn on the machine by pressing • Turn off the machine by pressing and holding .. The LCD displays [Shutting Down] and stays on for a few seconds before turning off. 2. Function Buttons Copy/Scan Options Press to access temporary settings for scanning or copying. WiFi (for wireless models) Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen instructions to set up a wireless connection between your machine and your network.
Clear • Press to delete entered data. • Press to cancel the current setting. OK Press to store your machine settings. a or b Press to scroll up or down through menus and options. 5. Stop/Exit • Press to stop an operation. • Press to exit from a menu. 6. Start • Press to start copying. • Press to start scanning documents.
Home > Introduction to Your Brother Machine > Control Panel Overview Control Panel Overview Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL The control panel may vary depending on your model. 2 1 3 4 5 6 1. Near Field Communication (NFC) (HL-L2395DW/MFC-L2750DW/MFC-L2750DWXL) If your Android™ device supports the NFC feature, you can print from your device or scan documents to your device by touching it to the NFC symbol on the control panel. 2.
Home > Introduction to Your Brother Machine > Touchscreen LCD Overview Touchscreen LCD Overview Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL When a Home screen is displayed, press d or c to display the other Home screens. The Home screen displays the machine's status when the machine is idle. When displayed, this screen indicates that your machine is ready for the next command. The available features will vary depending on your model. 1 2 5 6 4 3 1.
4. [Settings] Press to access the [Settings] menu. If Secure Function Lock or Setting Lock has been turned on, a lock icon appears on the LCD. You must unlock the machine to use Settings. 5. or (Wireless Status for wireless models) Press to configure wireless settings. If you are using a wireless connection, a four-level indicator in each of the Home screens displays the current wireless signal strength. 0 Max Wireless LAN Disabled 6.
The warning icon view it, and then press appears when there is an error or maintenance message; press the message area to to return to Ready Mode. NOTE • This product adopts the font of ARPHIC TECHNOLOGY CO., LTD.
Home > Introduction to Your Brother Machine > How to Navigate the Touchscreen LCD How to Navigate the Touchscreen LCD Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Press your finger on the LCD to operate it. To display and access all the options, press d c or a b on the LCD to scroll through them. The following steps explain how to navigate through changing a machine setting. In this example, the LCD Backlight setting is changed from [Light] to [Med].
6. Press [Med]. 7. Press .
Home > Introduction to Your Brother Machine > Settings Screen Overview Settings Screen Overview Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Press to view the current machine status on the LCD. Use the Settings menu to access all of your Brother machine's settings. 1. Toner • Displays the remaining toner life. • Press to access the [Toner] menu. 2. Tray Setting Press to change the paper size and paper type settings. 3. Eco Mode Press to access the [Eco Mode] menu. 4.
Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows) Access Brother Utilities (Windows) Brother Utilities is an application launcher that offers convenient access to all Brother applications installed on your computer. 1. Do one of the following: • (Windows 7) Click • (Start) > All Programs > Brother > Brother Utilities. (Windows 8) Tap or click • (Brother Utilities) either on the Start screen or the desktop. (Windows 8.
Related Information • Introduction to Your Brother Machine • Uninstall the Brother Software and Drivers (Windows) 20
Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows) > Uninstall the Brother Software and Drivers (Windows) Uninstall the Brother Software and Drivers (Windows) 1. Do one of the following: • (Windows 7) Click • (Start) > All Programs > Brother > Brother Utilities. (Windows 8) Tap or click • (Brother Utilities) either on the Start screen or the desktop. (Windows 8.
Home > Paper Handling Paper Handling • Load Paper • Paper Settings • Recommended Print Media • Load Documents • Unscannable and Unprintable Areas • Using Special Paper 22
Home > Paper Handling > Load Paper Load Paper • Load and Print Using the Paper Tray • Load and Print Paper in the Manual Feed Slot 23
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray Load and Print Using the Paper Tray • Load Paper in the Paper Tray 24
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load Paper in the Paper Tray Load Paper in the Paper Tray • If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper size and paper type. Change the paper size and paper type settings if needed, following the LCD instructions.
5. Make sure the paper is below the maximum paper mark (b b b). Overfilling the paper tray will cause paper jams. 6. Slowly push the paper tray completely into the machine. 7. Lift the support flap to prevent paper from sliding off the output tray.
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot Load and Print Paper in the Manual Feed Slot • Load and Print Plain Paper, Thin Paper, Recycled Paper and Bond Paper in the Manual Feed Slot • Load and Print on Thick Paper and Labels in the Manual Feed Slot • Load and Print on Envelopes in the Manual Feed Slot 27
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot > Load and Print Plain Paper, Thin Paper, Recycled Paper and Bond Paper in the Manual Feed Slot Load and Print Plain Paper, Thin Paper, Recycled Paper and Bond Paper in the Manual Feed Slot When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on your computer at the same time. 1. Lift the support flap to prevent paper from sliding off the face down output tray. 2.
• Load paper into the manual feed slot with the printing surface facing up. • Make sure the paper is straight and in the correct position in the manual feed slot. If it is not, the paper may not be fed correctly, resulting in a skewed printout or a paper jam. • To remove a small printout from the output tray, use both hands to lift up the scanner cover. • You can still use the machine while the scanner cover is up. To close the scanner cover, push it down with both hands. 5.
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot > Load and Print on Thick Paper and Labels in the Manual Feed Slot Load and Print on Thick Paper and Labels in the Manual Feed Slot When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on your computer at the same time. 1. Open the machine's back cover (the face up output tray).
Change your print preferences in the Print screen before sending the print job from your computer. 6. After the printed page comes out from the back of the machine, load the next sheet of paper in the manual feed slot. Repeat for each page that you want to print. 7. Close the back cover (the face up output tray) until it locks in the closed position.
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot > Load and Print on Envelopes in the Manual Feed Slot Load and Print on Envelopes in the Manual Feed Slot When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on your computer at the same time. 1. Open the machine's back cover (the face up output tray). The machine automatically turns on Manual Feed mode when you load paper in the manual feed slot. 2.
• Load the envelope into the manual feed slot with the printing surface facing up. • Pull the envelope out completely when you reload the envelope into the manual feed slot. • Do not put more than one envelope in the manual feed slot at one time, as it may cause a jam. • Make sure the envelope is straight and in the correct position on the manual feed slot. If it is not, the envelope may not be fed correctly, resulting in a skewed printout or a paper jam. 6. Send your print job to the machine.
Home > Paper Handling > Paper Settings Paper Settings • Change the Paper Size and Paper Type • Change the Check Paper Size Setting 34
Home > Paper Handling > Paper Settings > Change the Paper Size and Paper Type Change the Paper Size and Paper Type When you change the size and type of the paper you load in the tray, you must change the Paper Size and Paper Type settings on the LCD at the same time. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2.
Home > Paper Handling > Paper Settings > Change the Check Paper Size Setting Change the Check Paper Size Setting When you turn on your machine's Check Size setting, the machine displays a message when you remove a paper tray, asking if you changed the paper size and paper type. The default setting is On. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1.
Home > Paper Handling > Recommended Print Media Recommended Print Media To get the best print quality, we recommend using the paper listed in the table.
Home > Paper Handling > Load Documents Load Documents You can send a fax, make copies and scan from the Automatic Document Feeder (ADF) and from the scanner glass.
Home > Paper Handling > Load Documents > Load Documents in the Automatic Document Feeder (ADF) Load Documents in the Automatic Document Feeder (ADF) Related Models: DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/ MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Use the ADF when copying or scanning multiple-page, standard-sized documents. • The ADF can hold up to 50 pages and feed each sheet individually. • Use standard 20 lb (80 g/m2) paper.
Home > Paper Handling > Load Documents > Load Documents on the Scanner Glass Load Documents on the Scanner Glass Use the scanner glass to fax, copy, or scan one page at a time. Document Sizes Supported Length: Up to 11.8 in. (300 mm) Width: Up to 8.5 in. (215.9 mm) Weight: Up to 4.4 lb (2 kg) To use the scanner glass, the ADF must be empty. 1. Lift the document cover. 2. Place the document on the scanner glass face down. 3. Place the corner of the page in the upper left corner of the scanner glass.
Home > Paper Handling > Unscannable and Unprintable Areas Unscannable and Unprintable Areas The measurements in the table below show maximum unscannable and unprintable areas from the edges of the most commonly-used paper sizes. These measurements may vary depending on the paper size or settings in the application you are using. 1 2 4 3 Do not attempt to scan, copy, or print into these areas; your output will not reflect anything in these areas.
Home > Paper Handling > Using Special Paper Using Special Paper Always test paper samples before purchasing them to ensure desirable performance. • DO NOT use inkjet paper; it may cause a paper jam or damage your machine. • If you use bond paper, paper with a rough surface, or paper that is wrinkled or creased, the paper may exhibit degraded performance. Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.
Home > Print Print • Print from Your Computer (Windows) • Print from Your Computer (Mac) • Cancel a Print Job • Test Print 43
Home > Print > Print from Your Computer (Windows) Print from Your Computer (Windows) • Print a Document (Windows) • Print Settings (Windows) • Change the Default Print Settings (Windows) • Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows) • Monitor the Status of the Machine from Your Computer (Windows) 44
Home > Print > Print from Your Computer (Windows) > Print a Document (Windows) Print a Document (Windows) 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears. 3. Make sure you have loaded the correct size paper in the paper tray. 4. Click the Paper Size drop-down list, and then select your paper size. 5.
Related Information • Print from Your Computer (Windows) Related Topics: • Print Settings (Windows) 46
Home > Print > Print from Your Computer (Windows) > Print Settings (Windows) Print Settings (Windows) Basic Tab 1. Paper Size Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size. 2. Orientation Select the orientation (portrait or landscape) of your printout. If your application contains a similar setting, we recommend that you set the orientation using the application. 3.
5. Resolution Select the print resolution. As print resolution and speed are related, the higher the resolution, the longer it will take to print the document. 6. Print Settings Select the type of document you want to print. Manual Settings... Specify advanced settings such as brightness, contrast, and other settings. Graphics Use Printer Halftone Select this option to use the printer driver to express halftones. Brightness Specify the brightness. Contrast Specify the contrast.
9. Paper Source Select the paper source setting according to your print conditions or purpose. First Page Select the paper source to use for printing the first page. Other Pages Select the paper source to use for printing the second and subsequent pages. Advanced Tab 1. Scaling Select these options to enlarge or reduce the size of the pages in your document. Fit to Paper Size Select this option to enlarge or reduce the document pages to fit a specified paper size.
3. Use Watermark Select this option to print a logo or text on your document as a watermark. Select one of the preset watermarks, add a new watermark, or use an image file you have created. 4. Header-Footer Print Select this option to print the date, time and PC login user name on the document. 5. Toner Save Mode Select this feature to conserve toner by using less toner to print documents; printouts appear lighter, but are still legible. 6.
Home > Print > Print from Your Computer (Windows) > Change the Default Print Settings (Windows) Change the Default Print Settings (Windows) When you change an application's print settings, the changes only apply to documents printed with that application. To change print settings for all Windows applications, you must configure the printer driver properties. 1. Do one of the following: • For Windows Server 2008 Click • (Start) > Control Panel > Hardware and Sound > Printers.
Home > Print > Print from Your Computer (Windows) > Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows) Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows) Related Models: DCP-L2550DW/HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL The BR-Script3 printer driver lets you print PostScript® data more clearly.
Home > Print > Print from Your Computer (Windows) > Monitor the Status of the Machine from Your Computer (Windows) Monitor the Status of the Machine from Your Computer (Windows) The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices, allowing you to get immediate notification of errors. • Do one of the following: - Double-click the - (Windows 7) Click icon in the task tray. (Start) > All Programs > Brother > Brother Utilities.
Home > Print > Print from Your Computer (Mac) Print from Your Computer (Mac) • Print a Document (Mac) • Print Options (Mac) • Monitor the Status of the Machine from Your Computer (Mac) 54
Home > Print > Print from Your Computer (Mac) > Print a Document (Mac) Print a Document (Mac) 1. Make sure you have loaded the correct size paper in the paper tray. 2. From an application, such as Apple TextEdit, click the File menu, and then select Print. 3. Select Brother XXX-XXXX (where XXXX is your model name). 4. Type the number of copies you want in the Copies field. 5. Click the Paper Size pop-up menu, and then select your paper size. 6.
Home > Print > Print from Your Computer (Mac) > Print Options (Mac) Print Options (Mac) Page Setup 1. Paper Size Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size. 2. Orientation Select the orientation (portrait or landscape) of your printout. If your application contains a similar setting, we recommend that you set the orientation using the application. 3.
Layout 1. Pages per Sheet Select the number of pages to print on a single sheet of paper. 2. Layout Direction Select the page order when printing multiple pages on a single sheet of paper. 3. Border Select the type of border to use when printing multiple pages on a single sheet of paper. 4. Two-Sided Select whether to print on both sides of the paper. 5. Reverse page orientation Select this option to rotate the printed image 180 degrees. 6.
Paper Handling 1. Collate pages Select this option to print sets of multi-page documents in the original page order. When this option is selected, one complete copy of your document will print, and then reprint according to the number of copies you choose. If this option is not selected, then each page will print according to the number of copies chosen before the next page of the document is printed. 2. Pages to Print Select which pages you want to print (even pages or odd pages). 3.
Print Settings 1. Media Type Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts its print settings according to the selected media type. 2. Print Quality Select the print resolution you want. Because print quality and speed are related, the higher the quality, the longer it will take to print the document. 3. Paper Source Select the paper source setting according to your print conditions or purpose. 4.
Secure Print 1. Secure Print (Available only for certain models) This feature ensures that confidential or sensitive documents do not print until you enter a password on the machine's control panel.
Home > Print > Print from Your Computer (Mac) > Monitor the Status of the Machine from Your Computer (Mac) Monitor the Status of the Machine from Your Computer (Mac) The Status Monitor utility is a configurable software tool for monitoring the status of a device, allowing you to get immediate notification of error messages, such as paper empty or paper jam, at preset update intervals. You can also access Web Based Management. 1.
Home > Print > Cancel a Print Job Cancel a Print Job >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Stop/Exit. To cancel multiple print jobs, press and hold Stop/Exit for four seconds. HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Press . To cancel multiple print jobs, press and hold for about four seconds.
Home > Print > Test Print Test Print If there are problems with print quality, follow these instructions to do a test print: >> HL-L2390DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> DCP-L2550DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [Printer] option, and then press OK. 3. Press a or b to display the [Print Options] option, and then press OK. 4.
Home > Scan Scan • Scan Using the Scan Button on Your Brother Machine • Scan from Your Computer (Windows) • Scan from Your Computer (Mac) • Configure Scan Settings Using Web Based Management 64
Home > Scan > Scan Using the Scan Button on Your Brother Machine Scan Using the Scan Button on Your Brother Machine • Scan Photos and Graphics • Save Scanned Data to a Folder as a PDF File • Scan to an Editable Text File (OCR) • Scan to Email Attachment • Scan to FTP • Scan to Network (Windows) • Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) • Change Scan Button Settings from ControlCenter4 (Windows) • Change Scan Button Settings from Brother iPrint&Scan (Mac) • Configure
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan Photos and Graphics Scan Photos and Graphics Send scanned photos or graphics directly to your computer. Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software (Windows) or Brother iPrint&Scan (Mac).
• [Remove Bkg. Clr] (available only for the [Color] and [Gray] options.) 9. Press OK. 10. Press Start. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job. HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Load your document. 2. Press [Scan] > [to PC] > [to Image]. 3. If the machine is connected over the network, press a or b to display the computer where you want to send data, and then press the computer name.
• [Remove Background Color] (available only for the [Color] and [Gray] options.) 7. Press [OK]. 8. Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Save Scanned Data to a Folder as a PDF File Save Scanned Data to a Folder as a PDF File Scan documents and save them to a folder on your computer as PDF files. Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software (Windows) or Brother iPrint&Scan (Mac).
9. Press OK. 10. Press Start. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job. HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Load your document. 2. Press [Scan] > [to PC] > [to File]. 3. If the machine is connected over the network, press a or b to display the computer where you want to send data, and then press the computer name.
7. Press [OK]. 8. Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to an Editable Text File (OCR) Scan to an Editable Text File (OCR) Your machine can convert characters in a scanned document to text using optical character recognition (OCR) technology. You can edit this text using your preferred text-editing application. ABC ABC • The Scan to OCR feature is available for certain languages. • Use the Scan button on the machine to make temporary changes to the scan settings.
(available only for the [Color] and [Gray] options.) 9. Press OK. 10. Press Start. The machine scans the document, converts it to editable text, and then sends it to your default word processing application. HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Load your document. 2. Press [Scan] > [to PC] > [to OCR]. 3. If the machine is connected over the network, press a or b to display the computer where you want to send data, and then press the computer name.
(available only for the [Color] and [Gray] options.) 7. Press [OK]. 8. Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Email Attachment Scan to Email Attachment Send a scanned document as an email attachment. • Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software (Windows) or Brother iPrint&Scan (Mac). • The Scan to Email feature does not support Webmail services.
• [File Type] • [Document Size] • [ADF Auto Deskew] (available for certain models) • [Remove Bkg. Clr] (available only for the [Color] and [Gray] options.) 9. Press OK. 10. Press Start. The machine scans the document and saves it as a file attachment. It then launches your email application and opens a new, blank email message with the scanned file attached. HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Load your document. 2. Press [Scan] > [to PC] > [to E-mail]. 3.
• [Document Size] • [Scan Settings] • [ADF Auto Deskew] (available for certain models) • [Remove Background Color] (available only for the [Color] and [Gray] options.) 7. Press [OK]. 8. Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to FTP Scan to FTP Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Scan documents directly to an FTP server when you need to share the scanned information. For added convenience, configure different profiles to save your favorite Scan to FTP destinations.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to FTP > Set up a Scan to FTP Profile Set up a Scan to FTP Profile Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Set up a Scan to FTP Profile to scan and upload the scanned data directly to an FTP location. We recommend Microsoft Internet Explorer 11/Edge for Windows and Safari 9/10 for Mac. Make sure that JavaScript and Cookies are always enabled in whichever browser you use. 1. Start your web browser.
5. Click the Scan to FTP/Network Profile menu in the left navigation bar. 6. Select the profile you want to set up or change. 7. In the Profile Name field, type a name for this server profile (up to 15 alphanumeric characters). The machine will display this name on the LCD. 8. In the Host Address field, type the Host Address (for example: ftp.example.com; up to 64 characters) or the IP address (for example: 192.23.56.189). 9. Change the Port Number setting used to access the FTP server.
13. Click the File Name drop-down list, and then select a file name prefix from the preset names provided, or from user-defined names. The file name used for the scanned document will be the file name prefix you select, followed by the last six digits of the flatbed/ADF scanner counter and the file extension (for example: "Estimate_098765.pdf"). 14. Click the Quality drop-down list, and then select a quality setting.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to FTP > Upload Scanned Data to an FTP Server Upload Scanned Data to an FTP Server Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Share scanned information by saving it to your FTP server. 1. Load your document. 2. Press [Scan] > [to FTP]. 3. Press a or b to select one of the network server profiles listed.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Network (Windows) Scan to Network (Windows) Scan documents directly to a CIFS server on your local network. For added convenience, you can configure different profiles to save your favorite Scan to Network destinations.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Network (Windows) > Set up a Scan to Network Profile Set up a Scan to Network Profile Related Models: MFC-L2750DW/MFC-L2750DWXL Set up a Scan to Network Profile to scan and upload scanned data directly to a folder on a CIFS server. We recommend Microsoft Internet Explorer 11/Edge for Windows and Safari 9/10 for Mac. Make sure that JavaScript and Cookies are always enabled in whichever browser you use. 1. Start your web browser.
5. Click the Scan to FTP/Network Profile menu in the left navigation bar. 6. Select the profile you want to set up or change. 7. In the Profile Name field, type a name for this server profile (up to 15 alphanumeric characters). The machine will display this name on the LCD. 8. In the Network Folder Path field, type the path to the folder on the CIFS server where you want to send your scanned data. 9.
12. Click the Document Size drop-down list, and then select your document size from the list. This is necessary to make sure the scanned file is the correct size. 13. Click the File Size drop-down list, and then select your file size from the list. 14. Click the Remove Background Color drop-down list, and then select the level from the list. You can use this feature to remove the background color of documents to make the scanned data more legible. 15.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Network (Windows) > Set up a Scan to Network Profile > Set the Date and Time Using Web Based Management Set the Date and Time Using Web Based Management Make sure the date and time and the time zone settings are set correctly using Web Based Management or the control panel, so the machine's time matches the time being used by the server providing authentication. Ignore step 1, if you already have a Web Based Management window open.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Network (Windows) > Upload Scanned Data to a CIFS Server Upload Scanned Data to a CIFS Server Related Models: MFC-L2750DW/MFC-L2750DWXL 1. Load your document. 2. Press [Scan] > [to Network]. 3. The server profiles you have set up using Web Based Management are listed. Select the profile you want.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) The Web Services protocol enables Windows 7, Windows 8 and Windows 10 users to scan using a Brother machine on the network. You must install the driver via Web Services.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) > Use Web Services to Install Drivers Used for Scanning (Windows 7, Windows 8, and Windows 10) Use Web Services to Install Drivers Used for Scanning (Windows 7, Windows 8, and Windows 10) Use Web Services to monitor printers on the network. • Make sure you have installed the Brother software and drivers.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) > Scan Using Web Services from the Brother Machine (Windows 7, Windows 8 and Windows 10) Scan Using Web Services from the Brother Machine (Windows 7, Windows 8 and Windows 10) If you have installed the driver for scanning via Web Services, you can access the Web Services scanning menu on your Brother machine's LCD.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) > Configure Scan Settings for Web Services Configure Scan Settings for Web Services 1. Do one of the following: • Windows 7 Click • (Start) > Devices and Printers. Windows 8 Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Change Scan Button Settings from ControlCenter4 (Windows) Change Scan Button Settings from ControlCenter4 (Windows) 1. Click the (ControlCenter4) icon in the task tray, and then click Open. 2. Click the Device Settings tab. 3. Click the Device Scan Settings button. The Device Scan Settings dialog box appears. 4. Click the tab for the Scan to action you want to change (Image, OCR, E-mail, or File). 5. Change the settings as needed. 6.
Settings Applicable Features Image OCR E-mail File File Type Yes Yes Yes Yes Target Application Yes Yes - - OCR Language - Yes - - File Name Yes Yes Yes Yes Destination Folder or Scan Location Yes Yes Yes Yes Show Save As Window - - - Yes Show Folder - - - Yes File Size Priority Yes - Yes Yes Resolution Yes Yes Yes Yes Scan Type Yes Yes Yes Yes Document Size Yes Yes Yes Yes Brightness Yes Yes Yes Yes Contrast Yes Yes Yes Yes ID Card Scan
• Auto Use for any type of document. This mode automatically picks an appropriate color depth for the document. • Black & White Use for text or line art images. • Gray (Error Diffusion) Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray images without using true gray dots. Black dots are put in a specific pattern to give a gray appearance.) • True Gray Use for photographic images or graphics.
Related Topics: • Scan Photos and Graphics • Save Scanned Data to a Folder as a PDF File • Scan to an Editable Text File (OCR) • Scan to Email Attachment 96
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Change Scan Button Settings from Brother iPrint&Scan (Mac) Change Scan Button Settings from Brother iPrint&Scan (Mac) 1. In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon. The Brother iPrint&Scan screen appears. 2. If your Brother machine is not selected, click the Select your Machine button, and then follow the on-screen instructions to select your Brother machine. 3.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Configure Certificate for Signed PDF Configure Certificate for Signed PDF If you select Signed PDF for Scan features, you must configure a certificate on your machine using Web Based Management. To use Signed PDF, you must install a certificate on your machine and your computer. 1. Start your web browser.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Disable Scanning from Your Computer Disable Scanning from Your Computer You can disable the ability to scan from your computer. Set the pull scan setting using Web Based Management. 1. Start your web browser. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP address of the machine or the print server name). For example: http://192.168.1.2 No password is required by default.
Home > Scan > Scan from Your Computer (Windows) Scan from Your Computer (Windows) There are several ways you can use your computer to scan photos and documents on your Brother machine. Use the software applications provided by Brother, or use your favorite scanning application.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) Scan Using ControlCenter4 Home Mode (Windows) Use ControlCenter4 Home Mode to access your machine's main features.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) Scan Using ControlCenter4 Home Mode (Windows) Select Home Mode as the mode setting for ControlCenter4. 1. Load your document. (ControlCenter4) icon in the task tray, and then click Open. 2. Click the 3. Click the Scan tab. 4. Select the Document Type. 5. Change the document's Scan Size, if needed. 6. Click (Scan).
Related Information • Scan Using ControlCenter4 Home Mode (Windows) • Select Document Type Using ControlCenter4 Home Mode (Windows) • Change Scan Size Using ControlCenter4 Home Mode (Windows) • Crop a Scanned Image Using ControlCenter4 Home Mode (Windows) • Print Scanned Data Using ControlCenter4 Home Mode (Windows) • Scan to an Application Using ControlCenter4 Home Mode (Windows) 103
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Select Document Type Using ControlCenter4 Home Mode (Windows) Select Document Type Using ControlCenter4 Home Mode (Windows) • Select the Document Type option that matches the type of original you want to scan.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Select Document Type Using ControlCenter4 Home Mode (Windows) > Custom Scan Settings (Windows) Custom Scan Settings (Windows) Select Custom in the Document Type list to change advanced scan settings. • Select Custom, and then click the Custom Settings button. The Custom Scan Settings dialog box appears.
Brightness Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark, set a higher brightness level and scan the document again. You can also type a value into the field to set the Brightness level. Contrast Increase or decrease the Contrast level by moving the slider to the right or left.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Change Scan Size Using ControlCenter4 Home Mode (Windows) Change Scan Size Using ControlCenter4 Home Mode (Windows) For faster scan speeds, select the exact size of your document from the Scan Size drop-down menu.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Crop a Scanned Image Using ControlCenter4 Home Mode (Windows) Crop a Scanned Image Using ControlCenter4 Home Mode (Windows) The crop tool on the Image Editing Toolbar lets you trim unwanted areas from your scanned image. Use the Zoom In and Zoom Out tools to help view the image to be cropped. Image Editing Toolbar 1.
a. Expands the scanned image so that the entire image fits in the window. b. Zooms in on the image. c. Zooms out of the image. d. Rotates the image counter-clockwise 90 degrees. e. Rotates the image clockwise 90 degrees. f. Click and drag the frame to adjust the area to be cropped. 3. Click OK. The edited image appears in the image viewer.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Print Scanned Data Using ControlCenter4 Home Mode (Windows) Print Scanned Data Using ControlCenter4 Home Mode (Windows) Scan a document on your Brother machine, and then print copies using the printer driver features that are available in ControlCenter4. 1. Scan a document. 2. Click Print. a. Shows which images are currently selected. b.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan to an Application Using ControlCenter4 Home Mode (Windows) Scan to an Application Using ControlCenter4 Home Mode (Windows) The Open with an Application button lets you scan an image directly into your graphics application for editing. Select Home Mode as the mode setting for ControlCenter4. 1. Load your document. 2.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Home Mode (Windows) Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Home Mode (Windows) Select Home Mode as the mode setting for ControlCenter4. 1. Load your document. 2. Click the (ControlCenter4) icon in the task tray, and then click Open. 3. Click the Scan tab. 4. Select the Document Type. 5.
To save the document as a password-protected PDF, select Secure PDF Single-Page (*.pdf) or Secure PDF Multi-Page (*.pdf) from the File Type drop-down list, click , and then type the password. 10. To change the file name, click the Change button, if needed. 11. Click the folder icon to browse and select the folder where you want to save your scanned documents. 12. Click OK. The scanned document is saved to the destination folder as a PDF.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Both Sides of a Document Automatically Using ControlCenter4 Home Mode (Windows) Scan Both Sides of a Document Automatically Using ControlCenter4 Home Mode (Windows) Related Models: MFC-L2750DW/MFC-L2750DWXL Select Home Mode as the mode setting for ControlCenter4. 1. Load documents in the ADF. To scan both sides of a document automatically, you must use the ADF, not the flatbed scanner glass. 2.
• Click (Print) to print scanned data. • Click (Open with an Application) to open scanned data in another application. • Click (Send E-mail) to attach scanned data to an email. • Click (OCR) to convert your scanned document to an editable text file.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Settings for ControlCenter4 Home Mode (Windows) Scan Settings for ControlCenter4 Home Mode (Windows) Settings Applicable Features Open with an Application OCR Send E-mail Save File Type - Yes Yes Yes Target Application Yes Yes - - OCR Language - Yes - - File Name - - - Yes Scan Location - - - Yes Show Folder - - - Yes File Size Priority - - Yes Yes File Type Select the
Target Application Select the destination application from the drop-down list. OCR Language Set the optical character recognition (OCR) language to match the language of the scanned document's text. File Name Click Change to change the file name's prefix. Scan Location Select the Folder or SharePoint radio button to specify the destination where you want to save your scanned documents. Show Folder Select this option to automatically display the destination folder after scanning.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) Scan Using ControlCenter4 Advanced Mode (Windows) ControlCenter4 Advanced Mode gives you more control over the details of your machine's features and allows you to customize one-button scan actions.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan Photos and Graphics Using ControlCenter4 Advanced Mode (Windows) Scan Photos and Graphics Using ControlCenter4 Advanced Mode (Windows) Send scanned photos or graphics directly to your computer. Select Advanced Mode as the mode setting for ControlCenter4. 1. Load your document. 2. Click the (ControlCenter4) icon in the task tray, and then click Open. 3. Click the Scan tab. 4.
5. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed. • To change the file name, click Change. • To change Destination Folder, click the folder icon. • To preview and configure the scanned image, select the PreScan check box. 6. Click Scan. The machine starts scanning. The image opens in the application you have selected.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Advanced Mode (Windows) Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Advanced Mode (Windows) Scan documents and save them to a folder on your computer as PDF files. Select Advanced Mode as the mode setting for ControlCenter4. 1. Load your document. 2. Click the (ControlCenter4) icon in the task tray, and then click Open.
4. Click the File button. The scan settings dialog box appears. 5. Click the File Type drop-down list, and then select a PDF file. To save the document as a password-protected PDF, select Secure PDF Single-Page (*.pdf) or Secure PDF Multi-Page (*.pdf) from the File Type drop-down list, click , and then type the password. 6. Click the folder icon to browse and select the folder where you want to save your scanned documents. 7.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan Both Sides of a Document Automatically Using ControlCenter4 Advanced Mode (Windows) Scan Both Sides of a Document Automatically Using ControlCenter4 Advanced Mode (Windows) Related Models: MFC-L2750DW/MFC-L2750DWXL Select Advanced Mode as the mode setting for ControlCenter4. 1. Load documents in the ADF.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan Both Sides of an ID Card Using ControlCenter4 Advanced Mode (Windows) Scan Both Sides of an ID Card Using ControlCenter4 Advanced Mode (Windows) Select Advanced Mode as the mode setting for ControlCenter4. 1. Place an ID card on the scanner glass. 2. Click the (ControlCenter4) icon in the task tray, and then click Open. 3. Click the Scan tab.
4. Click the File button. The scan settings dialog box appears. 5. Select the ID Card Scan check box. The instruction dialog box appears. 6. Read the instructions on the screen, and then click OK. 7. Change the scan settings, such as file format, file name, scan location, resolution and color, if needed. 8. Click Scan. The machine starts scanning one side of the identification card. 9. After the machine has scanned one side, turn over the identification card, and then click Continue to scan the other side.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan to Email Attachment Using ControlCenter4 Advanced Mode (Windows) Scan to Email Attachment Using ControlCenter4 Advanced Mode (Windows) Send a scanned document as an email attachment. • Select Advanced Mode as the mode setting for ControlCenter4. • The Scan to Email feature does not support Webmail services.
5. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed. • To change the file name, click Change. • To change Destination Folder, click the folder icon. • To preview and configure the scanned image, select the PreScan check box. 6. Click Scan. The machine starts scanning. Your default email application opens and the scanned image is attached to a new, blank email message.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan to an Editable Text File (OCR) Using ControlCenter4 Advanced Mode (Windows) Scan to an Editable Text File (OCR) Using ControlCenter4 Advanced Mode (Windows) Your machine can convert characters in a scanned document to text using optical character recognition (OCR) technology. You can edit this text using your preferred text-editing application.
5. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed. • To change the file name, click Change. • To change Destination Folder, click the folder icon. • To preview and configure the scanned image, select the PreScan check box. 6. Click Scan. The machine scans the document, converts it to editable text, and then sends it to your default word processing application.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan Settings for ControlCenter4 Advanced Mode (Windows) Scan Settings for ControlCenter4 Advanced Mode (Windows) Settings Applicable Features Image OCR E-mail File File Type Yes Yes Yes Yes Target Application Yes Yes - - OCR Language - Yes - - File Name Yes Yes Yes Yes Scan Location or Destination Folder Yes Yes Yes Yes Show Folder - - - Yes Show Save As Window - - -
• XML Paper Specification (*.xps) (the XML Paper Specification is available for Windows 7, Windows 8 and Windows 10, and when using applications that support XML Paper Specification files) For Email and File • Microsoft Office Word (*.docx) (Available only for certain models) • Microsoft Office PowerPoint (*.pptx) (Available only for certain models) • Microsoft Office Excel (*.xlsx)(Available only for certain models) For OCR • HTML 3.2 (*.htm) • HTML 4.0 (*.htm) • Microsoft Excel 2003, XP (*.
• Black & White Use for text or line art images. • Gray (Error Diffusion) Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray images without using true gray dots. Black dots are put in a specific pattern to give a gray appearance.) • True Gray Use for photographic images or graphics. This mode is more accurate because it uses up to 256 shades of gray. • 24bit Color Use to create an image with the most accurate color reproduction. This mode uses up to 16.
Default Select this option to restore all settings to their factory setting values.
Home > Scan > Scan from Your Computer (Windows) > Scan Using Nuance™ PaperPort™ 14SE or Other Windows Applications Scan Using Nuance™ PaperPort™ 14SE or Other Windows Applications You can use the Nuance™ PaperPort™ 14SE application for scanning. To download the Nuance™ PaperPort™ 14SE application, click • (Brother Utilities), select Do More in the left navigation bar, and then click PaperPort. • Nuance™ PaperPort™ 14SE supports Windows 7, Windows 8, Windows 8.1 and Windows 10.
7. Adjust the settings in the Scanner Setup dialog box, if needed. 8. Click the Document Size drop-down list, and then select your document size. To scan both sides of the document (MFC-L2750DW/MFC-L2750DWXL): Automatic 2-sided scan is available only when using the ADF. You cannot use PreScan to preview an image. 9. Click PreScan if you want to preview your image and crop unwanted portions before scanning. 10. Click Start. The machine starts scanning.
Home > Scan > Scan from Your Computer (Windows) > Scan Using Nuance™ PaperPort™ 14SE or Other Windows Applications > TWAIN Driver Settings (Windows) TWAIN Driver Settings (Windows) • Note that the item names and assignable values will vary depending on the machine. • The Contrast option is available only when selecting the Gray (Error Diffusion), True Gray, or 24bit Color options from the Scan Type settings. 1.
4. Document Size Select the exact size of your document from a selection of preset scan sizes. If you select Custom, the Custom Document Size dialog box appears and you can specify the document size. 5. Brightness Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark, set a higher brightness level and scan the document again.
Emphasize the characters of the original by making them bold. - Blurred Character Correction Correct the broken or incomplete characters of the original to make them easier to read. - Edge Emphasis Make the characters of the original sharper. - Reduce Noise Improve and enhance the quality of your scanned images with this selection. The Reduce Noise option is available when selecting the 24bit Color option and the 300 x 300 dpi, 400 x 400 dpi, or 600 x 600 dpi scan resolution.
Home > Scan > Scan from Your Computer (Windows) > Scan Using Windows Fax and Scan Scan Using Windows Fax and Scan Windows Fax and Scan application is another option that you can use for scanning. • Windows Fax and Scan uses the WIA scanner driver. • If you want to crop a portion of a page after pre-scanning the document, you must scan using the scanner glass (also called the flatbed). 1. Load your document. 2. Launch Windows Fax and Scan. 3. Click File > New > Scan. 4.
Home > Scan > Scan from Your Computer (Windows) > Scan Using Windows Fax and Scan > WIA Driver Settings (Windows) WIA Driver Settings (Windows) Paper source Select the Document Feeder or Flatbed option from the drop-down list. Picture Type (Image Type) Select Color picture, Grayscale picture, Black and white picture or text, or Custom Settings for the type of document you want to scan. To change advanced settings, click the Adjust the quality of the scanned picture link.
Related Information • Scan Using Windows Fax and Scan 141
Home > Scan > Scan from Your Computer (Mac) Scan from Your Computer (Mac) There are several ways you can use your Mac to scan photos and documents on your Brother machine. Use the software applications provided by Brother or your favorite scanning application.
Home > Scan > Scan from Your Computer (Mac) > Scan Using Brother iPrint&Scan (Mac) Scan Using Brother iPrint&Scan (Mac) 1. In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon. The Brother iPrint&Scan screen appears. 2. If your Brother machine is not selected, click the Select your Machine button, and then follow the on-screen instructions to select your Brother machine. 3. Click the Scan icon, and then follow the on-screen instructions to scan your documents.
Home > Scan > Scan from Your Computer (Mac) > Scan Using TWAIN-Compliant Applications (Mac) Scan Using TWAIN-Compliant Applications (Mac) You can also scan using TWAIN-compliant applications. For more information about the scanning procedure, see the manual for your application. To use Brother TWAIN Driver, go to your model's Downloads page on the Brother Solutions Center at support.brother.com and download Scanner Driver. 1. Start your graphics application, and then select the scan operation.
Related Information • Scan from Your Computer (Mac) • TWAIN Driver Settings (Mac) 145
Home > Scan > Scan from Your Computer (Mac) > Scan Using TWAIN-Compliant Applications (Mac) > TWAIN Driver Settings (Mac) TWAIN Driver Settings (Mac) 1 2 3 4 5 6 • Item names and assignable values will vary depending on the machine. • The Contrast setting is available only when selecting Gray (Error Diffusion), True Gray, or 24bit Color from the Scan Type options. 1. Resolution Select a scanning resolution from the Resolution pop-up menu.
4. Adjust Image Click the Adjust Image button to adjust other image qualities. Brightness Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark, set a higher brightness level and scan the document again. You can also type a value in the box to set the brightness.
Home > Scan > Configure Scan Settings Using Web Based Management Configure Scan Settings Using Web Based Management • Set the Scan File Name Using Web Based Management 148
Home > Scan > Configure Scan Settings Using Web Based Management > Set the Scan File Name Using Web Based Management Set the Scan File Name Using Web Based Management Set up a file name for scanned data using Web Based Management. 1. Start your web browser. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP address of the machine or the print server name). For example: http://192.168.1.2 No password is required by default.
Home > Copy Copy • Copy a Document • Enlarge or Reduce Copied Images • Make N in 1 Copies Using the Page Layout Feature • Sort Copies • Copy an ID Card • Copy on Both Sides of the Paper (2-sided Copy) • Copy Options 150
Home > Copy > Copy a Document Copy a Document >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Make sure you have loaded the correct size paper in the paper tray. 2. Do one of the following: • Place the document face up in the ADF. (available only for certain models) (If you are copying multiple pages, we recommend using the ADF.
2. Do one of the following: • Place the document face up in the ADF. (If you are copying multiple pages, we recommend using the ADF.) • Place the document face down on the scanner glass. 3. Press ([Copy]). The LCD displays: Copy Options Plain Paper Letter Start 4. To enter the number of copies you want, do one of the following: • Press [-] or [+] using the LCD. • Use the dial pad. • Press to display a numeric keypad on the LCD, and then enter the number of copies. Press [OK]. 5.
Home > Copy > Enlarge or Reduce Copied Images Enlarge or Reduce Copied Images Select an enlargement or reduction ratio to resize your copied data. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Load your document. 2. Do one of the following: • For MFC models (COPY). Press Use the dial pad to enter the number of copies you want.
• If you select [Custom(25-400%)], press (backspace) to erase the displayed percentage, or press d to move the cursor, and then enter an enlargement or reduction ratio from [25%] to [400%] . Press [OK]. • If you selected [100%] or the [Auto] option, go to the next step. 8. When finished, press [OK]. (If the [OK] button is displayed.) 9. Press [Start]. • [Auto] sets the machine to calculate the reduction ratio that best fits the size of paper. • [Auto] is only available when using the ADF.
Home > Copy > Make N in 1 Copies Using the Page Layout Feature Make N in 1 Copies Using the Page Layout Feature The N in 1 copy feature saves paper by copying two or four pages of your document onto one page of the copy. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Load your document. 2. Do one of the following: • For MFC models Press (COPY).
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Load your document. 2. Press ([Copy]). 3. Enter the number of copies. 4. Press [Options]. 5. Press a or b to display the [Page Layout] option, and then press [Page Layout]. 6. Press a or b to display the options, and then press the option you want. Option Description 2in1(Portrait) 2in1(Landscape) 4in1(Portrait) 4in1(Landscape) 7. When finished, press [OK]. 8. Press [Start].
Home > Copy > Sort Copies Sort Copies Sort multiple copies. Pages will be stacked in the order they are fed, that is: 1, 2, 3, and so on. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Load your document. 2. Do one of the following: • For MFC models (COPY). Press Use the dial pad to enter the number of copies you want.
Related Information • Copy 158
Home > Copy > Copy an ID Card Copy an ID Card • You may copy an identification card only to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. (For MFC models) Press (COPY). 2.
6. After the machine has scanned the first side, turn over the identification card. 7. Press Start to scan the other side. HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Place your identification card face down near the upper left corner of the scanner glass. 1 1 0.16 in. (4.0 mm) or greater (top, left) 2. Press [Copy] > [2 in 1 ID Copy]. 3. Enter the number of copies. 4. Press [Start]. The machine scans one side of the identification card. 5.
Home > Copy > Copy on Both Sides of the Paper (2-sided Copy) Copy on Both Sides of the Paper (2-sided Copy) Reduce the amount of paper you use by copying onto both sides of the paper. • You must choose a 2-sided copy layout from the following options before you can start 2-sided copying. • The layout of your original document determines which 2-sided copy layout you should choose. • To use the automatic 2-sided copy feature, you must load your document in the ADF.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Load your document. 2. Do one of the following: • For MFC models (COPY). Press Use the dial pad to enter the number of copies you want. • For DCP models Press a or b to enter the number of copies you want. 3. Do one of the following: • Press 2-sided. • Press Options or Copy/Scan Options. Press a or b to select [2-sided], and then press OK. 4. Press a or b to display [Layout Long] or [Layout Short], and then press OK. 5.
Home > Copy > Copy Options Copy Options >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW To change Copy settings, press the Options button. Menu selections Options Quality Select the copy quality for your type of document. Stack/Sort Select to stack or sort multiple copies.
Menu selections Options 2-sided Select to copy on both sides of the paper. (available only for certain models) 1-sided → 2-sided 1 1 2 2 2-sided → 2-sided 1 1 2 2 HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL To change Copy settings, press [Options]. Menu selections Options Quality Select the copy quality for your type of document. Enlarge/Reduce 100% - Enlarge Select an enlargement ratio for the next copy. Reduce Select a reduction ratio for the next copy.
Menu selections Options Page Layout Make N in 1 copies. 4 in1 2-sided Copy Select to copy on both sides of the paper. 1-sided → 2-sided 1 1 2 2 2-sided → 2-sided 1 1 2 2 The available options will vary depending on your model. 2-sided Copy Page Layout Select long edge or short edge. (available only for certain settings) Save as Shortcut Add the current settings as a shortcut.
Home > Fax Fax • Send a Fax • Receive a Fax • Voice Operations and Fax Numbers • Telephone Services and External Devices • Fax Reports • PC-FAX 166
Home > Fax > Send a Fax Send a Fax • Send a Fax • Send a 2-sided Fax from the ADF • Send a Fax Manually • Send a Fax at the End of a Conversation • Send the Same Fax to More than One Recipient (Broadcasting) • Send a Fax in Real Time • Send a Fax at a Specified Time (Delayed Fax) • Add a Cover Page to Your Fax • Cancel a Fax in Progress • Check and Cancel a Pending Fax • Fax Options 167
Home > Fax > Send a Fax > Send a Fax Send a Fax Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press (FAX). 2. Do one of the following: • Place the document face up in the ADF. (If you are faxing multiple pages, we recommend using the ADF.) • Place the document face down on the scanner glass.
3. Enter the fax number. • Using the dial pad Enter the fax number using the dial pad. • Using the One Touch Buttons Choose a contact stored on a One Touch button. • Using the Speed Dial Codes Enter the fax number by pressing twice, and then enter the three-digit Speed Dial code. 4. Press Start. The machine scans and sends the document.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Do one of the following: • Place the document face up in the ADF. (If you are faxing multiple pages, we recommend using the ADF.) • Place the document face down on the scanner glass. 2. Press ([Fax]). 3. Enter the fax number. • Using the dial pad Press the digits to enter the fax number. • Using the Address Book Press ([Address Book]), and then do one of the following: - Press a or b to display the number you want, and then press it.
4. Press [Fax Start]. The machine scans and sends the document. If you placed the document on the scanner glass, follow the instructions in the table. Option Description Yes To scan the next page, press the Yes option, and then place the next page on the scanner glass. Press OK to scan the page. No After you have scanned the last page, press the No option. The machine sends the document. To stop faxing, press .
Home > Fax > Send a Fax > Send a 2-sided Fax from the ADF Send a 2-sided Fax from the ADF Related Models: MFC-L2750DW/MFC-L2750DWXL You must select a 2-sided scanning format before sending a 2-sided fax. Select either Long Edge or Short Edge, depending on the layout of your document. 1. Load your document. 2. Press [(Fax)] > [Options] > [2-sided Fax]. 3. Do one of the following: • If your document is flipped on the long edge, press the [2-sided Scan: Long Edge] option.
Home > Fax > Send a Fax > Send a Fax Manually Send a Fax Manually Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Manual fax transmission lets you hear the dialing, ringing and fax-receiving tones while sending a fax. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press (FAX). 2. Load your document. 3. Press Hook and listen for a dial tone. 4.
Home > Fax > Send a Fax > Send a Fax at the End of a Conversation Send a Fax at the End of a Conversation Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL At the end of a conversation, you can send a fax to the other party before you both hang up. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1.
Home > Fax > Send a Fax > Send the Same Fax to More than One Recipient (Broadcasting) Send the Same Fax to More than One Recipient (Broadcasting) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use the Broadcasting feature to send the same fax to multiple fax numbers at the same time. • The same broadcast can include Groups, Address Book numbers (One Touch Dial numbers and Speed Dial numbers in some models) and up to 50 manually dialed numbers.
• If you are using the scanner glass, the machine scans the first page. When the LCD displays [Next page?], press an option shown in the table. Option Description Yes Select Yes to scan the next page. Place the Next page on the Scanner Glass, and then press OK. Repeat this step to scan all pages. No Select No to send the document. • The machine’s available memory will vary depending on the types of jobs in the memory and the numbers used for broadcasting.
Home > Fax > Send a Fax > Send the Same Fax to More than One Recipient (Broadcasting) > Cancel a Broadcast in Progress Cancel a Broadcast in Progress Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL While broadcasting you can cancel the fax currently being sent or the whole broadcast job. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2.
Home > Fax > Send a Fax > Send a Fax in Real Time Send a Fax in Real Time Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL When sending a fax, the machine scans the document into the memory before sending it. As soon as the telephone line is free, the machine starts dialing and sending. If you want to send an important document immediately without waiting for the machine to retrieve the scan from its memory, turn on [Real Time TX].
Home > Fax > Send a Fax > Send a Fax at a Specified Time (Delayed Fax) Send a Fax at a Specified Time (Delayed Fax) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can store up to 50 faxes in the machine's memory to be sent within the next twenty-four hour period. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW (FAX). 1. Press 2. Load your document.
Home > Fax > Send a Fax > Add a Cover Page to Your Fax Add a Cover Page to Your Fax Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can add a cover page to the next fax or every outgoing fax. • This feature will not work unless you have programmed your Station ID. • Your cover page includes your Station ID, a comment, and the name stored in the Address Book, One Touch Dial, or Speed Dial (in some models).
11. Press [Fax Start]. The cover page will be added to the next fax. If you want to add the cover page to every outgoing fax, set the settings as the new default.
Home > Fax > Send a Fax > Add a Cover Page to Your Fax > Compose Your Own Comments Compose Your Own Comments Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can set up two comments of your own. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW (FAX). 1. Press 2. Press Menu. 3. Press a or b to display the [Fax] option, and then press OK. 4.
Home > Fax > Send a Fax > Cancel a Fax in Progress Cancel a Fax in Progress Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Stop/Exit while the machine is dialing or sending a fax. 2. Press an option in the table to cancel or continue the fax job in progress.
Home > Fax > Send a Fax > Check and Cancel a Pending Fax Check and Cancel a Pending Fax Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can cancel a fax job before it is sent, by canceling the fax job while it is stored and waiting in the memory. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW (FAX). 1. Press 2. Press Menu. 3.
Home > Fax > Send a Fax > Fax Options Fax Options >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW To change fax-sending settings, press the [Options] button. Option Description Fax Resolution Set the resolution for outgoing faxes. The fax quality often can be improved by changing the Fax Resolution. Contrast Adjust the contrast.
Option Description Set New Default Save your settings as the default. Factory Reset Restore all settings back to the factory settings. You can save the current settings by pressing [Save as Shortcut].
Home > Fax > Receive a Fax Receive a Fax • Receive Mode Settings • Memory Receive Options • Remote Fax Retrieval 187
Home > Fax > Receive a Fax > Receive Mode Settings Receive Mode Settings • Receive Modes Overview • Choose the Correct Receive Mode • Set the Number of Rings Before the Machine Answers (Ring Delay) • Set the F/T Ring Time (Pseudo/Double-ring) • Set Easy Receive • Shrink Page Size of an Oversized Incoming Fax • Set the 2-sided Printing for Received Faxes • Set the Fax Receive Stamp • Receive a Fax at the End of a Telephone Conversation • Register a Number in the Blocked List 188
Home > Fax > Receive a Fax > Receive Mode Settings > Receive Modes Overview Receive Modes Overview Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Some receive modes answer automatically (Fax Only Mode and Fax/Tel Mode). You may want to change the Ring Delay before using these modes. Fax Only Mode ([Fax Only] in the machine's menu) Fax Only Mode automatically answers every call as a fax.
Home > Fax > Receive a Fax > Receive Mode Settings > Choose the Correct Receive Mode Choose the Correct Receive Mode Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL The correct Receive Mode for you is determined by the external devices and telephone subscriber services (Voice Mail, Distinctive Ring and so on) you will be using on the same line as the Brother machine.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Receive Mode]. If you cannot change the [Receive Mode] option, make sure the Distinctive Ring feature is set to [Off]. 2. Press a or b to display the [Fax Only], [Fax/Tel], [External TAD], or [Manual] option, and then press the option you want. 3. Press .
Home > Fax > Receive a Fax > Receive Mode Settings > Set the Number of Rings Before the Machine Answers (Ring Delay) Set the Number of Rings Before the Machine Answers (Ring Delay) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL When somebody calls your machine, you will hear the normal telephone ring sound. The number of rings is set in the Ring Delay option.
Home > Fax > Receive a Fax > Receive Mode Settings > Set the F/T Ring Time (Pseudo/Double-ring) Set the F/T Ring Time (Pseudo/Double-ring) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL When you set the Receive Mode to Fax/Tel Mode, if the call is a fax, your machine will automatically receive it. However, if it is a voice call, the machine will sound the F/T ring (pseudo/double-ring) for the time you set in the F/T Ring Time option.
Home > Fax > Receive a Fax > Receive Mode Settings > Set Easy Receive Set Easy Receive Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If Easy Receive is On: The machine can receive a fax automatically, even if you answer the call. When you see [Receiving] on the LCD or hear a click on the phone line through the handset you are using, just replace the handset. Your machine will do the rest.
Home > Fax > Receive a Fax > Receive Mode Settings > Shrink Page Size of an Oversized Incoming Fax Shrink Page Size of an Oversized Incoming Fax Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If you enable the auto reduction function, the machine reduces each page of an incoming fax to fit on your paper. The machine calculates the reduction ratio by using the page size of the fax and your Paper Size setting.
Home > Fax > Receive a Fax > Receive Mode Settings > Set the 2-sided Printing for Received Faxes Set the 2-sided Printing for Received Faxes Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Your machine prints received faxes on both sides of the paper when [2-sided] is set to [On]. • Use Letter, Legal, Folio (8.5 in. × 13 in.) or Mexico Legal size paper for this function [16 to 28 lb (60 to 105 g/m2)].
Home > Fax > Receive a Fax > Receive Mode Settings > Set the Fax Receive Stamp Set the Fax Receive Stamp Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can set the machine to print the received date and time at the top center of each received fax page. • Make sure you have set the current date and time on the machine.
Home > Fax > Receive a Fax > Receive Mode Settings > Receive a Fax at the End of a Telephone Conversation Receive a Fax at the End of a Telephone Conversation Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If you are speaking on the telephone connected to your Brother machine and the other party is also speaking on a telephone connected to his fax machine, at the end of the conversation, the other party can send you a fax before you both hang up.
Home > Fax > Receive a Fax > Receive Mode Settings > Register a Number in the Blocked List Register a Number in the Blocked List Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If you do not want to receive faxes or calls from specific numbers, register the numbers to your list of blocked callers. The machine can register up to 100 fax or telephone numbers from the caller ID memory.
Home > Fax > Receive a Fax > Memory Receive Options Memory Receive Options Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use Memory Receive options to direct incoming faxes while you are away from the machine. You can use only one Memory Receive option at a time.
Home > Fax > Receive a Fax > Memory Receive Options > Forward Incoming Faxes to Another Machine Forward Incoming Faxes to Another Machine Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use the Fax Forwarding feature to automatically forward your incoming faxes to another machine. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2.
Home > Fax > Receive a Fax > Memory Receive Options > Store Incoming Faxes in the Machine's Memory Store Incoming Faxes in the Machine's Memory Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use the Fax Storage feature to store incoming faxes in the machine's memory. Retrieve your stored fax messages from your fax machine when you are at another location using the Remote Retrieval commands. Your machine will print a backup copy of each stored fax.
Home > Fax > Receive a Fax > Memory Receive Options > Change Memory Receive Options Change Memory Receive Options Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW If there are faxes in your machine's memory when you change any Memory Receive option, the LCD displays one of the following questions: If received
- If you press [No], faxes in the memory will not be erased and the setting will be unchanged.
Home > Fax > Receive a Fax > Memory Receive Options > Turn Off Memory Receive Turn Off Memory Receive Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Turn off Memory Receive if you do not want the machine to save or transfer incoming faxes. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2.
Home > Fax > Receive a Fax > Memory Receive Options > Print a Fax Stored in the Machine's Memory Print a Fax Stored in the Machine's Memory Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If you select [Fax Storage], you can still print a fax from the memory when you are at your machine. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2.
Home > Fax > Receive a Fax > Memory Receive Options > Use PC-Fax Receive to Transfer Received Faxes to Your Computer (Windows only) Use PC-Fax Receive to Transfer Received Faxes to Your Computer (Windows only) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Turn on the PC-Fax Receive feature, automatically store incoming faxes to your machine's memory, and then send them to your computer. Use your computer to view and store these faxes.
5. Press [Backup Print: On] or [Backup Print: Off]. 6. Press .
Home > Fax > Receive a Fax > Remote Fax Retrieval Remote Fax Retrieval Use Remote Retrieval to call your machine from any touch-tone telephone or fax machine, and use a remote access code and remote commands to retrieve fax messages.
Home > Fax > Receive a Fax > Remote Fax Retrieval > Set a Remote Access Code Set a Remote Access Code Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Set a Remote Access Code to access and control your Brother machine even when you are away from it. Before you can use the remote access and retrieval features, you must set up your own code. The factory default code is the inactive code (---*).
Home > Fax > Receive a Fax > Remote Fax Retrieval > Use Your Remote Access Code Use Your Remote Access Code Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL 1. Dial your fax number from a telephone or another fax machine using touch tone. 2. When your machine answers, immediately enter your Remote Access Code (three digits followed by *). 3.
Home > Fax > Receive a Fax > Remote Fax Retrieval > Remote Retrieval Commands Remote Retrieval Commands Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use the Remote Commands in this table to access fax commands and options when you are away from your Brother machine.
Home > Fax > Receive a Fax > Remote Fax Retrieval > Forward Faxes Remotely Forward Faxes Remotely Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Call your Brother machine from any touch-tone telephone or fax machine to forward incoming faxes to another machine. You must turn on Fax Storage to use this feature. 1. Dial your fax number. 2. When your machine answers, enter your Remote Access Code (three digits followed by *).
Home > Fax > Receive a Fax > Remote Fax Retrieval > Change the Fax Forwarding Number Change the Fax Forwarding Number Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can change your fax forwarding number from another touch-tone telephone or fax machine. 1. Dial your fax number. 2. When your machine answers, enter your Remote Access Code (three digits followed by *). If you hear one long beep, you have messages. 3.
Home > Fax > Voice Operations and Fax Numbers Voice Operations and Fax Numbers • Voice Operations • Store Fax Numbers • Dial a Number Using One Touch Dial • Dial a Number Using Speed Dial • Set up Groups for Broadcasting • Dial Access Codes and Credit Card Numbers 215
Home > Fax > Voice Operations and Fax Numbers > Voice Operations Voice Operations • Send Tone Signals (For Canada) • Pick up a Voice Call in Fax/Tel Receive Mode • Special Line Considerations 216
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Send Tone Signals (For Canada) Send Tone Signals (For Canada) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If you have a Pulse dialing service, but must send Tone signals (for example, for telephone banking), follow these steps. If you have a Touch Tone service, you will not need this feature to send tone signals.
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Pick up a Voice Call in Fax/Tel Receive Mode Pick up a Voice Call in Fax/Tel Receive Mode Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL When the machine is in Fax/Tel mode, it will use the F/T Ring (pseudo/double-ring) to alert you to pick up a voice call.
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations Special Line Considerations • Rollover Telephone Lines • Two-Line Telephone System • Convert Telephone Wall Outlets • Install Your Brother Machine, an External Two-Line TAD and Two-Line Telephone 219
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations > Rollover Telephone Lines Rollover Telephone Lines Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL A rollover telephone system is a group of two or more separate telephone lines that pass incoming calls to each other if they are busy. This feature is available only in the USA and Canada.
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations > Two-Line Telephone System Two-Line Telephone System Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL A two-line telephone system is nothing more than two separate telephone numbers on the same wall outlet. This feature is available only in the USA and Canada. The two telephone numbers can be on separate jacks (RJ11) or combined into one jack (RJ14).
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations > Convert Telephone Wall Outlets Convert Telephone Wall Outlets Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL This feature is available only in the USA and Canada. There are three ways to convert to an RJ11 jack. The first two ways may require assistance from the telephone company. You can change the wall outlets from one RJ14 jack to two RJ11 jacks.
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations > Install Your Brother Machine, an External Two-Line TAD and Two-Line Telephone Install Your Brother Machine, an External Two-Line TAD and Two-Line Telephone Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL When you are installing an external two-line telephone answering device (TAD) and a two-line telephone, your machine must be isolated on one line at both
Home > Fax > Voice Operations and Fax Numbers > Store Fax Numbers Store Fax Numbers Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL • Store Address Book Numbers • Change or Delete Address Book Names or Numbers 224
Home > Fax > Voice Operations and Fax Numbers > Store Fax Numbers > Store Address Book Numbers Store Address Book Numbers Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Press [(Fax)] > [Address Book]. 2. Do the following steps: a. Press [Edit]. b. Press [Add New Address]. c. Press [Name]. d. Enter the name using the LCD (up to 16 characters), and then press [OK]. e. Press [Address]. f. Enter the number using the LCD (up to 20 digits), and then press [OK]. g. Press [OK].
Home > Fax > Voice Operations and Fax Numbers > Store Fax Numbers > Store Address Book Numbers > Store Address Book Numbers from Outgoing Calls Store Address Book Numbers from Outgoing Calls Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL You can store Address Book numbers from the Outgoing Call history. [(Fax)] > [Call History] > [Outgoing Call]. 1. Press 2. Press the number you want. 3. Press [Edit] > [Add to Address Book] > [Name]. To delete the number, press [Edit] > [Delete].
Home > Fax > Voice Operations and Fax Numbers > Store Fax Numbers > Change or Delete Address Book Names or Numbers Change or Delete Address Book Names or Numbers Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Press [(Fax)] > [Address Book] > [Edit]. 2. Do one of the following: • Press [Change] to edit the names or fax or telephone numbers. Press a or b to display the number you want to change, and then press it. - To change the name, press [Name].
Home > Fax > Voice Operations and Fax Numbers > Dial a Number Using One Touch Dial Dial a Number Using One Touch Dial Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press (FAX). 2. Load your document. 3. Press the One Touch button assigned to the fax or telephone number you want to dial. To dial One Touch numbers 1 to 4, press the One Touch button. To dial One Touch numbers 5 to 8, hold down Shift as you press the One Touch button. 4. Press Start.
Home > Fax > Voice Operations and Fax Numbers > Dial a Number Using One Touch Dial > Store One Touch Dial Numbers Store One Touch Dial Numbers Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW You can store eight One Touch Dial numbers on the four One Touch buttons. To access One Touch Dial Numbers 5 to 8, hold down Shift as you press the One Touch button. 1. Press (FAX). 2. Press the One Touch button where you want to store the number.
Home > Fax > Voice Operations and Fax Numbers > Dial a Number Using One Touch Dial > Change or Delete One Touch Dial Numbers Change or Delete One Touch Dial Numbers Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press (FAX). 2. Press a three times. 3. Press a or b to display the [One Touch Dial] option, and then press OK. 4. Press the One Touch button you want to change or delete. 5. Do one of the following: • To change the stored name and number: a. Press a. b.
Home > Fax > Voice Operations and Fax Numbers > Dial a Number Using Speed Dial Dial a Number Using Speed Dial Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press (FAX). 2. Load your document. 3. Do one of the following: • Press • Press twice and enter the three-digit Speed Dial code. . Press the dial pad buttons for the first few letters of the name, and then press OK. Press a or b to scroll until you find the name you are looking for, and then press OK. 4. Press OK. 5.
Home > Fax > Voice Operations and Fax Numbers > Dial a Number Using Speed Dial > Store Speed Dial Numbers Store Speed Dial Numbers Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW Use the Speed Dial numbers to store up to 200 numbers with a name. 1. Press 2. Press (FAX). twice and enter a three-digit Speed Dial code (001 - 200). Press OK. If a number is not stored there, the LCD displays [Register Now?]. 3. Press a to select [Yes]. 4.
Home > Fax > Voice Operations and Fax Numbers > Dial a Number Using Speed Dial > Change or Delete Speed Dial Numbers Change or Delete Speed Dial Numbers Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW You can change or delete Speed Dial Codes. 1. Press (FAX). 2. Press a three times. 3. Press a or b to display the [Speed Dial] option, and then press OK. 4. Enter the Speed Dial code you want to change or delete, and then press OK. 5.
Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting Set up Groups for Broadcasting Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL A Group, which can be stored in the Address Book (One Touch Dial or Speed Dial in some models) allows you to send the same fax message to many fax numbers. First, you must store each fax number in the Address Book. Then you can include them as numbers in the Group.
a. Press [Edit] > [Setup Groups] > [Name]. b. Enter the Group name (up to 16 characters) using the LCD, and then press [OK]. c. Press [Add/Delete]. d. Add Address Book numbers to the Group by pressing them to display a red checkmark, and then press [OK]. e. Read and confirm the displayed list of names and numbers you have selected, and then press [OK] to save your Group. To store another Group for broadcasting, repeat these steps. 3. Press .
Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting > Change a Broadcasting Group Name Change a Broadcasting Group Name Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press (FAX). 2. Press a three times. 3. Press a or b to display the [Setup Groups] option, and then press OK.
Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting > Delete a Broadcasting Group Delete a Broadcasting Group Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press (FAX). 2. Press a three times. 3. Press a or b to display the [Setup Groups] option, and then press OK. 4.
Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting > Add or Delete a Broadcasting Group Member Add or Delete a Broadcasting Group Member Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press (FAX). 2. Press a three times. 3.
Related Information • Set up Groups for Broadcasting 239
Home > Fax > Voice Operations and Fax Numbers > Dial Access Codes and Credit Card Numbers Dial Access Codes and Credit Card Numbers Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Sometimes you may want to choose from several long-distance carriers when you send a fax. Rates may vary depending on the time and destination.
9. Press [Apply]. 10. Press [Fax Start]. The machine will dial '555-7000'. To temporarily change a number, you can substitute part of the number by pressing it using the LCD. For example, to change the number to '555-7001', you could enter the number (Brother 1: 555) using Address Book, press [Apply], and then press 7001 using the LCD. If you must wait for another dial tone or signal at any point in the dialing sequence, create a pause in the number by pressing [Pause].
Home > Fax > Telephone Services and External Devices Telephone Services and External Devices • Voice Mail • Distinctive Ring • Caller ID • External TAD (Telephone Answering Device) • External and Extension Telephones • Multi-line Connections (PBX) 242
Home > Fax > Telephone Services and External Devices > Voice Mail Voice Mail Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL This feature is available only in the USA and Canada. If you have Voice Mail on the same telephone line as your Brother machine, Voice Mail and the Brother machine will conflict with each other when receiving incoming calls.
Home > Fax > Telephone Services and External Devices > Distinctive Ring Distinctive Ring Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL This feature is available only in the USA and Canada. Distinctive Ring is a function of your Brother machine that allows a person with one line to receive fax and voice calls through two different phone numbers on that one line.
Ring Pattern Rings 1 short-short or long-long 2 short-long-short 3 short-short-long 4 very long (normal pattern) • Ring Pattern #1 is often called Short-Short and is the most commonly used. • If the ring pattern you received is not on this chart, contact your telephone company and ask for one that is shown. • The machine will answer only calls to its registered number. • The first two rings are silent on the machine.
Home > Fax > Telephone Services and External Devices > Distinctive Ring > Register the Distinctive Ring Pattern Register the Distinctive Ring Pattern Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL This feature is available only in the USA and Canada. After you set the Distinctive Ring feature to [On], your Distinctive Ring number will receive faxes automatically.
Related Information • Distinctive Ring 247
Home > Fax > Telephone Services and External Devices > Distinctive Ring > Turn Off Distinctive Ring Turn Off Distinctive Ring Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL This feature is available only in the USA and Canada. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW (FAX). 1. Press 2. Press Menu. 3.
Home > Fax > Telephone Services and External Devices > Caller ID Caller ID Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL The Caller ID feature lets you use the Caller ID subscriber service offered by many local telephone companies. This service displays the telephone number, or name if it is available, of your caller as the line rings. • The [# Unavailable] message means the call originated outside your Caller ID service area.
Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering Device) External TAD (Telephone Answering Device) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can connect an external Telephone Answering Device (TAD) to the same line as your machine. When the TAD answers a call, your machine will “listen” for the CNG (fax calling) tones sent by a sending fax machine.
Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering Device) > Connect an External TAD Connect an External TAD Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL The external TAD must be plugged into the back of the machine, into the jack labeled EXT. Your machine cannot work correctly if you plug the TAD into a wall jack (unless you are using Distinctive Ring). 1.
Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering Device) > Record an Outgoing Message (OGM) on the External TAD Record an Outgoing Message (OGM) on the External TAD Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL 1. Record 5 seconds of silence at the beginning of your message. This allows your machine time to listen for fax tones. 2. Limit your speaking to 20 seconds. 3.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones External and Extension Telephones • Connect an External or Extension Telephone • Operation from External and Extension Telephones • If You Use a Non-Brother Cordless External Handset • Use the Remote Codes 253
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Connect an External or Extension Telephone Connect an External or Extension Telephone Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can connect a separate telephone to your machine as shown in the diagram below. Connect the telephone line cord to the jack labeled EXT. Before you connect an external telephone, remove the protective cap (3) from the EXT.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Operation from External and Extension Telephones Operation from External and Extension Telephones Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use extension telephones If you answer a fax call at an extension telephone, you can make your machine receive the fax by pressing the Fax Receive Code *51.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > If You Use a Non-Brother Cordless External Handset If You Use a Non-Brother Cordless External Handset Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If your non-Brother cordless telephone is connected to the EXT. jack of the machine and you typically carry the cordless handset elsewhere, it is easier to answer calls during the Ring Delay.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Use the Remote Codes Use the Remote Codes Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Fax Receive Code If you answer a fax call on an extension telephone, you can tell your machine to receive it by pressing the Fax Receive Code *51. Wait for the chirping sounds, and then replace the handset.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Use the Remote Codes > Change the Remote Codes Change the Remote Codes Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL The preset Fax Receive Code is *51. The preset Telephone Answer Code is #51. If you are always disconnected when accessing your External TAD remotely, try changing the three-digit remote codes, for example to ### and 999.
Home > Fax > Telephone Services and External Devices > Multi-line Connections (PBX) Multi-line Connections (PBX) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL We suggest you ask the company that installed your PBX to connect your machine. If you have a multi line system we suggest you ask the installer to connect the unit to the last line on the system. This prevents the machine being activated each time the system receives telephone calls.
Home > Fax > Fax Reports Fax Reports The Transmission Verification Report and the Fax Journal are available to confirm the results of fax transmission.
Home > Fax > Fax Reports > Print a Transmission Verification Report Print a Transmission Verification Report Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can use the Transmission Verification Report as proof that you sent a fax. This report lists the receiving party's name or fax number, the time and date of transmission, duration of transmission, number of pages sent, and whether or not the transmission was successful.
Home > Fax > Fax Reports > Print a Fax Journal Print a Fax Journal Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can set the machine to print a Fax Journal at specific intervals (every 50 faxes, 6, 12 or 24 hours, 2 or 7 days). >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2.
3. If you selected 6, 12, 24 hours, 2 or 7 days, press [Time] and enter the time using the LCD, and then press [OK]. 4. If you selected [Every 7 Days], press [Day]. 5. Press a or b to display the [Every Monday], [Every Tuesday], [Every Wednesday], [Every Thursday], [Every Friday], [Every Saturday] or [Every Sunday] option, and then press the first day of the 7-day countdown. 6. Press .
Home > Fax > PC-FAX PC-FAX Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL • PC-FAX for Windows • PC-FAX for Mac 264
Home > Fax > PC-FAX > PC-FAX for Windows PC-FAX for Windows • PC-FAX Overview (Windows) • Send a Fax Using PC-FAX (Windows) • Receive Faxes on Your Computer (Windows) 265
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) PC-FAX Overview (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Reduce paper consumption and save time by using Brother's PC-FAX software to send faxes directly from your machine.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure PC-FAX (Windows) Configure PC-FAX (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Before sending faxes using PC-FAX, personalize the send options in each tab of the PC-FAX Setup dialog box. 1. Do one of the following: • Windows 7 Click (Start) > All Programs > Brother > Brother Utilities.
Related Information • PC-FAX Overview (Windows) 268
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) Configure your PC-Fax Address Book (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Add, edit and delete members and groups to personalize your Brother Address Book.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Add a Member to your PC-FAX Address Book (Windows) Add a Member to your PC-FAX Address Book (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Add new people and their fax information to the PC-Fax Address Book if you want to send a fax using Brother PC-Fax software. 1.
3. Type the member's information in the corresponding fields. Only the Name field is required. 4. Click OK.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Create a Group in your PC-FAX Address Book (Windows) Create a Group in your PC-FAX Address Book (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Create a group to broadcast the same PC-FAX to several recipients at one time. 1. Do one of the following: • Windows 7 (Start) > All Programs > Brother > Brother Utilities.
3. Type the name of the new group in the Group Name field. 4. In the Available Names field, select each name you want to include in the group, and then click Add >>. Members added to the group appear in the Group Members box. 5. When finished, click OK. Each group can contain up to 50 members.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Edit Member or Group Information in your PC-FAX Address Book (Windows) Edit Member or Group Information in your PC-FAX Address Book (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL 1. Do one of the following: • Windows 7 Click (Start) > All Programs > Brother > Brother Utilities.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Delete a Member or Group in your PC-FAX Address Book (Windows) Delete a Member or Group in your PC-FAX Address Book (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL 1. Do one of the following: • Windows 7 Click (Start) > All Programs > Brother > Brother Utilities.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Export your PC-FAX Address Book (Windows) Export your PC-FAX Address Book (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can export the Address Book as an ASCII text file (*.csv), a vCard (an electronic business card), or Remote Setup Dial Data and save it on your computer.
• Remote Setup Dial Data Browse to the folder where you want to save the data, type the file name in the File name field, and then click Save. 4. In the Available Items field, select the data you want to export, and then click Add >>. Select and add the items in the order you want them listed. 5. If you are exporting to an ASCII file, under the Divide Character section, select the Tab or Comma option to separate the data fields. 6. Click OK. 7.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Import Information to your PC-FAX Address Book (Windows) Import Information to your PC-FAX Address Book (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL You can import ASCII text files (*.csv), vCards (electronic business cards), or Remote Setup Dial Data into your Address Book. 1.
You must select and add fields from the Available Items list in the same order they are listed in the import text file. 5. If you are importing an ASCII file, under the Divide Character section, select the Tab or Comma option to separate the data fields. 6. Click OK. 7. Browse to the folder where you want to import the data, type the file name, and then click Open.
Home > Fax > PC-FAX > PC-FAX for Windows > Send a Fax Using PC-FAX (Windows) Send a Fax Using PC-FAX (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL PC-FAX supports only black and white faxes. A black and white fax will be sent even if the original data is color and the receiving fax machine supports color faxes. 1. Create a file in any application on your computer. 2. Select the print command in your application. 3.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) Receive Faxes on Your Computer (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use Brother's PC-FAX software to receive faxes on your computer, screen them and print only those faxes you want.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) Receive Faxes Using PC-FAX Receive (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Brother's PC-FAX Receive software lets you view and store faxes on your computer. It is automatically installed when you install the Brother software and drivers and works on locally or network-connected machines.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) > Run Brother's PC-FAX Receive on Your Computer (Windows) Run Brother's PC-FAX Receive on Your Computer (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL We recommend selecting the Start PC-FAX Receive on computer startup check box so that the software runs automatically and can transfer any faxes upon computer st
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) > Run Brother's PC-FAX Receive on Your Computer (Windows) > Set Up Your Computer for PC-FAX Receiving (Windows) Set Up Your Computer for PC-FAX Receiving (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL 1. Double-click the (PC-Fax Receive (Ready)) icon in your computer task tray.
Related Information • Run Brother's PC-FAX Receive on Your Computer (Windows) 285
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) > Run Brother's PC-FAX Receive on Your Computer (Windows) > Add Your Brother Machine to PC-FAX Receiving (Windows) Add Your Brother Machine to PC-FAX Receiving (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL • If you installed the machine following the instructions for a network user, then the machine should al
5. To change the computer name that will appear on the machine's LCD, type the new name in the Enter your PC display name (Max 15 Characters) field. 6. Click OK.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) > View Received PC-FAX Messages (Windows) View Received PC-FAX Messages (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Receiving Status Icon Indicated Status Standby mode No unread messages Receiving messages Messages received Unread messages 1.
Even after closing the window, PC-FAX Receive is active and the (PC-Fax Receive (Ready) ) icon will remain in your computer task tray. To close PC-FAX Receive, click the icon in the computer task tray and click Close.
Home > Fax > PC-FAX > PC-FAX for Mac PC-FAX for Mac Use Brother's PC-FAX software to send faxes directly from your Mac without printing them. This feature helps reduce your paper consumption and save time.
Home > Fax > PC-FAX > PC-FAX for Mac > Send Faxes from Your Application (Mac) Send Faxes from Your Application (Mac) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL PC-FAX supports only black and white faxes. A black and white fax will be sent even if the original data is color and the receiving fax machine supports color faxes. 1. Create a document in a Mac application. 2.
To send a fax to more than one number, click the Add button after entering the first fax number and type the next fax number. The destination fax numbers will be listed in the Destination Fax Numbers field. 6. Click Print to send the fax.
Home > Network Network • Supported Basic Network Features • Network Management Software and Utilities • Additional Methods of Configuring Your Brother Machine for a Wireless Network • Advanced Network Features • Technical Information for Advanced Users 293
Home > Network > Supported Basic Network Features Supported Basic Network Features The print server supports various features depending on the operating system. Use this table to see which network features and connections are supported by each operating system. Operating Systems Windows 7 Windows 8 Windows 10 Windows Server 2008/2008 R2/2012/2012 R2/2016 Yes macOS v10.10.5 macOS v10.11.x macOS v10.12.
Home > Network > Network Management Software and Utilities Network Management Software and Utilities Configure and change your Brother machine's network settings using a management utility.
Home > Network > Network Management Software and Utilities > Learn about Network Management Software and Utilities Learn about Network Management Software and Utilities Web Based Management Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). Type your machine's IP address into your web browser to access and change your print server settings.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network Additional Methods of Configuring Your Brother Machine for a Wireless Network To connect your machine to your wireless network, we recommend using the Brother installation disc.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Before Configuring Your Brother Machine for a Wireless Network Before Configuring Your Brother Machine for a Wireless Network Before attempting to configure a wireless network, confirm the following: • To achieve optimum results with normal everyday document printing, place the Brother machine as close to the wireless LAN access point/router as possible with minimal obstructions.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network Configure Your Machine for a Wireless Network 1. Turn on your computer and insert the Brother installation disc into your computer. • For Windows, follow these instructions: • For Mac, click Driver Download to go to the Brother Solutions Center. Follow the on-screen instructions to install printer drivers. 2. The opening screen appears automatically.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS) Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS) If your wireless access point/router supports WPS (PBC: Push Button Configuration), you can use WPS from your machine's control panel menu to configure your wireless network settings.
You have completed the wireless network setup. To install Full Driver & Software Package necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) If your wireless LAN access point/router supports WPS, you can use the Personal Identification Number (PIN) Method to configure your wireless network settings.
2 Routers or access points that support WPS are marked with this symbol: >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2. Press a or b to select the [Network] option, and then press OK. 3. Press a or b to select the [WLAN] option, and then press OK. 4. Press a or b to select the [WPS w/PIN Code] option, and then press OK. 5.
• Windows 7 Click • (Start) > Devices and Printers > Add a device. Windows 8 Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings > Control Panel > Hardware and Sound > View devices and printers > Add a device. • Windows 10 > Windows System > Control Panel. In the Hardware and Sound group, click Add a device. Click • To use a Windows 7, Windows 8, or Windows 10 computer as a Registrar, you must register it to your network in advance.
• To use a Windows 7, or Windows 8 computer as a Registrar, you must register it to your network in advance. For more information, see the instructions supplied with your wireless LAN access point/ router. • If you use Windows 7 or Windows 8 as a Registrar, you can install the printer driver after the wireless configuration by following the on-screen instructions. To install the full driver and software package, use the Brother installer on the Installer CD-ROM. 7. Select your machine and click Next. 8.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW Before configuring your m
• If you are using an authentication and encryption method that requires a Network Key, enter the Network Key you wrote down in the first step. Enter the WEP key, and then press OK to apply your settings. To apply the settings, select [Yes]. To cancel, select [No]. • If your authentication method is Open System and your encryption mode is None, go to the next step. • If your WLAN access point/router supports WPS, [WPS is available] appears.
If a list of SSIDs is displayed, press a or b to display the SSID to which you want to connect, and then press the SSID. 5. Press [OK]. 6. Do one of the following: • If you are using an authentication and encryption method that requires a Network Key, enter the Network Key you wrote down in the first step. When you have entered all the characters, press [OK]. • If your authentication method is Open System and your encryption mode is None, go to the next step.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW Before configuring your machine, we recommend writing dow
• If you selected the [Shared Key] option, enter the WEP key, and then press OK. • If you selected the [WPA/WPA2-PSK] option, press a or b to select the Encryption Type [TKIP + AES] or [AES], and then press OK. Enter the WPA™ key, and then press OK. Your Brother machine supports the use of the first WEP key only. 12. To apply the settings, select [Yes]. To cancel, select [No]. 13. The machine attempts to connect to the wireless device you have selected.
• If you selected the [Open System] option, press [None] or [WEP]. If you selected the [WEP] option for Encryption type, enter the WEP key, and then press [OK]. • If you selected the [Shared Key] option, enter the WEP key, and then press [OK]. • If you selected the [WPA/WPA2-PSK] option, press [TKIP+AES] or [AES]. Enter the WPA™ key, and then press [OK]. Your Brother machine supports the use of the first WEP key only. 9. The machine attempts to connect to the wireless device you have selected.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® Use Wi-Fi Direct® • Print or Scan from Your Mobile Device Using Wi-Fi Direct • Configure Your Wi-Fi Direct Network • I Cannot Complete the Wireless Network Setup Configuration 312
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Print or Scan from Your Mobile Device Using Wi-Fi Direct Print or Scan from Your Mobile Device Using Wi-Fi Direct Wi-Fi Direct is one of the wireless configuration methods developed by the Wi-Fi Alliance®.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network Configure Your Wi-Fi Direct Network Configure your Wi-Fi Direct network settings from your machine's control panel.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Wi-Fi Direct Network Configuration Overview Wi-Fi Direct Network Configuration Overview The following instructions offer five methods for configuring your Brother machine in a wireless network environment. Select the method you prefer for your environment: Check your mobile device for configuration. 1.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the OnePush Method Configure Your Wi-Fi Direct Network Using the One-Push Method >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW If your mobile device supports
4. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from or scanning to your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the OnePush Method of Wi-Fi Protected Setup™ (WPS) Configure Your Wi-Fi Direct Network Using the One-Push Method of WiFi Protected Setup™ (WPS) >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2
Related Information • Configure Your Wi-Fi Direct Network Related Topics: • Wi-Fi Direct Network Configuration Overview 319
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN Method Configure Your Wi-Fi Direct Network Using the PIN Method >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW If your mobile device supports the PIN
2. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device. Then Press [OK].] appears on the machine's LCD. Press [OK] on your machine. This will start the Wi-Fi Direct setup. To cancel, press . 3. Do one of the following: • When your Brother machine is the Group Owner (G/O), it will wait for a connection request from your mobile device.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/
6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from or scanning to your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Manually Configure Your Wi-Fi Direct Network Manually >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW If your mobile device does not support Wi-Fi Direct or WPS, you
Home > Network > Advanced Network Features Advanced Network Features • Print the Network Configuration Report • Print the WLAN Report • Synchronize Time with the SNTP Server Using Web Based Management 325
Home > Network > Advanced Network Features > Print the Network Configuration Report Print the Network Configuration Report The Network Configuration Report lists the network configuration, including the network print server settings. • Node Name: The Node Name appears on the current Network Configuration Report. The default Node Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where "xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.
Home > Network > Advanced Network Features > Print the WLAN Report Print the WLAN Report The WLAN Report reflects your machine's wireless status. If the wireless connection fails, check the error code on the printed report. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2.
Home > Network > Advanced Network Features > Print the WLAN Report > Wireless LAN Report Error Codes Wireless LAN Report Error Codes If the Wireless LAN Report shows that the connection failed, check the error code on the printed report and see the corresponding instructions in the table: Error Code Problem and Recommended Solutions TS-01 The wireless setting is not activated, change the wireless setting to ON.
Error Code Problem and Recommended Solutions TS-08 Two or more WLAN access points that have WPS enabled are detected. • Confirm that only one WLAN access point/router within range has the WPS method active and try again. • Try starting again after few minutes in order to avoid effects from other access points.
Home > Network > Advanced Network Features > Synchronize Time with the SNTP Server Using Web Based Management Synchronize Time with the SNTP Server Using Web Based Management The Simple Network Time Protocol (SNTP) is used to synchronize the time used by the machine for authentication with the SNTP time server. (This is not the time displayed on the machine's LCD.) You can automatically or manually synchronize the machine's time with the Coordinated Universal Time (UTC) provided by the SNTP time server.
Home > Network > Advanced Network Features > Synchronize Time with the SNTP Server Using Web Based Management > Configure Date and Time Using Web Based Management Configure Date and Time Using Web Based Management Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Configure date and time to synchronize the time used by the machine with the SNTP time server. This feature is not available in some countries. 1. Start your web browser. 2.
Home > Network > Advanced Network Features > Synchronize Time with the SNTP Server Using Web Based Management > Configure the SNTP Protocol Using Web Based Management Configure the SNTP Protocol Using Web Based Management Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Configure the SNTP protocol to synchronize the time the machine uses for authentication with the time kept by the SNTP time server. 1. Start your web browser. 2.
Option Description Type the address you want to use. Primary SNTP Server Address Type the server address (up to 64 characters). Secondary SNTP Server Address The secondary SNTP server address is used as a backup to the primary SNTP server address. If the primary server is unavailable, the machine will contact the secondary SNTP server. Primary SNTP Server Port Type the port number (1-65535).
Home > Network > Technical Information for Advanced Users Technical Information for Advanced Users • Reset the Network Settings to the Factory Settings 334
Home > Network > Technical Information for Advanced Users > Reset the Network Settings to the Factory Settings Reset the Network Settings to the Factory Settings You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address. • This feature restores all wired (supported models only) and wireless network settings to the factory settings.
Home > Security Security • Lock the Machine Settings • Network Security Features 336
Home > Security > Lock the Machine Settings Lock the Machine Settings Before turning on the machine's Access Lock, make a careful note of your password. If you forget the password, you must reset all passwords stored in the machine by contacting your administrator or Brother Customer Service.
Home > Security > Lock the Machine Settings > Setting Lock Overview Setting Lock Overview Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use the Setting Lock feature to block unauthorized access to machine settings. When Setting Lock is set to On, you cannot access the machine settings without entering the password.
Home > Security > Lock the Machine Settings > Setting Lock Overview > Set the Setting Lock Password Set the Setting Lock Password Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [General Setup] option, and then press OK. 3.
Home > Security > Lock the Machine Settings > Setting Lock Overview > Change the Setting Lock Password Change the Setting Lock Password Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [General Setup] option, and then press OK. 3.
Home > Security > Lock the Machine Settings > Setting Lock Overview > Turn On Setting Lock Turn On Setting Lock Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [General Setup] option, and then press OK. 3.
Home > Security > Network Security Features Network Security Features • Before Using Network Security Features • Secure Function Lock 3.
Home > Security > Network Security Features > Before Using Network Security Features Before Using Network Security Features Your Brother machine employs some of the latest network security and encryption protocols available today. These network features can be integrated into your overall network security plan to help protect your data and prevent unauthorized access to the machine. We recommend disabling the FTP server and TFTP protocols. Accessing the machine using these protocols is not secure.
Home > Security > Network Security Features > Secure Function Lock 3.0 Secure Function Lock 3.0 Brother's Secure Function Lock 3.0 increases security by restricting the functions available on your Brother machine. • Before Using Secure Function Lock 3.0 • Configure Secure Function Lock 3.0 Using Web Based Management • Scan Using Secure Function Lock 3.0 • Configure Public Mode for Secure Function Lock 3.0 • Additional Secure Function Lock 3.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Before Using Secure Function Lock 3.0 Before Using Secure Function Lock 3.0 Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Use Secure Function Lock to configure passwords, set specific user page limits, and grant access to some or all of the functions listed here. You can configure and change the following Secure Function Lock 3.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Configure Secure Function Lock 3.0 Using Web Based Management Configure Secure Function Lock 3.0 Using Web Based Management Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.2 3. No password is required by default.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Scan Using Secure Function Lock 3.0 Scan Using Secure Function Lock 3.0 Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Setting Scan restrictions (for administrators) Secure Function Lock 3.0 allows an administrator to restrict which users are allowed to scan. When the Scan feature is set to Off for the public user setting, only users who have the Scan check box selected will be able to scan.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Configure Public Mode for Secure Function Lock 3.0 Configure Public Mode for Secure Function Lock 3.0 Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Use the Secure Function Lock screen to set up Public Mode, which limits the functions available to public users. Public users will not need to enter a password to access the features made available through Public Mode settings.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Additional Secure Function Lock 3.0 Features Additional Secure Function Lock 3.0 Features Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Configure the following features in the Secure Function Lock screen: All Counter Reset Click All Counter Reset, in the Page Counters column, to reset the page counter.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/TLS Manage Your Network Machine Securely Using SSL/TLS • Introduction to SSL/TLS • Certificates and Web Based Management • Manage Your Network Machine Securely Using Web Based Management • Manage Your Network Machine Securely Using BRAdmin Professional (Windows) • Print Documents Securely Using SSL/TLS 350
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Introduction to SSL/TLS Introduction to SSL/TLS Secure Socket Layer (SSL) or Transport Layer Security (TLS) is an effective method of protecting data sent over a local or wide area network (LAN or WAN). It works by encrypting data, such as a print job, sent over a network, so anyone trying to capture it will not be able to read it.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Introduction to SSL/TLS > Brief History of SSL/TLS Brief History of SSL/TLS SSL/TLS was originally created to secure web traffic information, particularly data sent between web browsers and servers. For example, when you use Internet Explorer for Internet Banking and you see https:// and the little padlock icon in the web browser, you are using SSL.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Introduction to SSL/TLS > Benefits of Using SSL/TLS Benefits of Using SSL/TLS The primary benefit of using SSL/TLS on Brother machines is to guarantee secure printing over an IP network by restricting unauthorized users from reading data sent to the machine. SSL's key selling point is that it can be used to print confidential data securely.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management Certificates and Web Based Management You must configure a certificate to manage your networked Brother machine securely using SSL/TLS. You must use Web Based Management to configure a certificate.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Supported Security Certificate Features Supported Security Certificate Features Your Brother machine supports the use of multiple security certificates, which allows secure management, authentication, and communication with the machine.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate Create and Install a Certificate • Step by Step Guide for Creating and Installing a Certificate • Create and Install a Self-signed Certificate • Create and Install a Certificate from a Certificate Authority (CA) • Import and Export a CA Certificate 356
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Step by Step Guide for Creating and Installing a Certificate Step by Step Guide for Creating and Installing a Certificate There are two options when choosing a security certificate: use a self-signed certificate or use a certificate from a Certificate Authority (CA).
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate Create and Install a Self-signed Certificate • Create a Self-signed Certificate • Install the Self-signed Certificate for Windows users with Administrator Rights • Import and Export the Self-signed Certificate on your Brother Machine 358
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Create a Self-signed Certificate Create a Self-signed Certificate 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.
17. Click Yes to restart your print server. The self-signed certificate is created and saved in your machine's memory. To use SSL/TLS communication, the self-signed certificate must be installed on your computer.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Install the Self-signed Certificate for Windows users with Administrator Rights Install the Self-signed Certificate for Windows users with Administrator Rights The following steps are for Microsoft Internet Explorer.
4. Click Continue to this website (not recommended). 5. Click Certificate error, and then click View certificates. 6. Click Install Certificate....
7. When the Certificate Import Wizard appears, click Next. 8. Select Place all certificates in the following store, and then click Browse.... 9. Select Trusted Root Certification Authorities, and then click OK. 10. Click Next.
11. Click Finish. 12. Click Yes, if the fingerprint (thumbprint) is correct. The fingerprint (thumbprint) is printed on the Network Configuration Report. 13. Click OK. The self-signed certificate is now installed on your computer, and SSL/TLS communication is available.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Import and Export the Self-signed Certificate on your Brother Machine Import and Export the Self-signed Certificate on your Brother Machine You can store the self-signed certificates on your Brother machine and manage them by importing and exporting.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Import the Selfsigned Certificate Import the Self-signed Certificate 1. Start your web browser. 2.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Export the Selfsigned Certificate Export the Self-signed Certificate 1. Start your web browser. 2.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) Create and Install a Certificate from a Certificate Authority (CA) If you already have a certificate from an external trusted CA, you can store the certificate and private key on the machine and manage them by importing and exporting.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Create a Certificate Signing Request (CSR) Create a Certificate Signing Request (CSR) A Certificate Signing Request (CSR) is a request sent to a Certificate Authority (CA) to authenticate the credentials contained within the certificate.
12. Click Save. • Follow your CA's policy regarding the method to send a CSR to your CA. • If you are using the Enterprise root CA of Windows Server 2008/2012/2012 R2/2016, we recommend using the Web Server for the certificate template to securely create the Client Certificate. For more detailed information, go to your model's FAQs & Troubleshooting page on the Brother support website at support.brother.com. Search for "SSL".
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Install a Certificate on Your Brother Machine Install a Certificate on Your Brother Machine When you receive a certificate from a CA, follow the steps below to install it into the print server: Only a certificate issued with your machine's CSR can be installed onto t
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key Import and Export the Certificate and Private Key Store the certificate and private key on your machine and manage them by importing and exporting them.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key > Import a Certificate and Private Key Import a Certificate and Private Key 1. Start your web browser. 2.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key > Export the Certificate and Private Key Export the Certificate and Private Key 1. Start your web browser. 2.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA Certificate Import and Export a CA Certificate You can import, export and store CA certificates on your Brother machine.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA Certificate > Import a CA Certificate Import a CA Certificate 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA Certificate > Export a CA Certificate Export a CA Certificate 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Manage Multiple Certificates Manage Multiple Certificates The multiple certificate feature allows you to use Web Based Management to manage each certificate installed on your machine. In Web Based Management, navigate to the Certificate or CA Certificate screen to view certificate content, delete, or export your certificates.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Manage Your Network Machine Securely Using Web Based Management Manage Your Network Machine Securely Using Web Based Management To manage your network machine securely, you must use management utilities with security protocols. We recommend using the HTTPS protocol for secure management. To use this protocol, HTTPS must be enabled on your machine. • The HTTPS protocol is enabled by default.
In this mode, the print server uses the read-write access of version 3 and the read-only access of version 1 and version 2c of the SNMP protocol. When you use SNMPv3 read-write access and v1/v2c read-only access mode, some Brother applications (such as BRAdmin Light) that access the print server do not work correctly since they authorize the read-only access of version 1 and version 2c. If you want to use all applications, we recommend using SNMP v1/v2c read-write access mode.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Manage Your Network Machine Securely Using BRAdmin Professional (Windows) Manage Your Network Machine Securely Using BRAdmin Professional (Windows) To use BRAdmin Professional utility, you must: • Use the latest version of BRAdmin Professional. Go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Print Documents Securely Using SSL/TLS Print Documents Securely Using SSL/TLS To print documents securely with IPP protocol, use the IPPS protocol. 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.
Home > Security > Network Security Features > Send an Email Securely Send an Email Securely • Configure Email Sending Using Web Based Management • Send an Email with User Authentication • Send an Email Securely Using SSL/TLS 383
Home > Security > Network Security Features > Send an Email Securely > Configure Email Sending Using Web Based Management Configure Email Sending Using Web Based Management We recommend using Web Based Management to configure secured email sending with user authentication, or email sending using SSL/TLS. 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.2 3.
Home > Security > Network Security Features > Send an Email Securely > Send an Email with User Authentication Send an Email with User Authentication Your Brother machine supports the SMTP-AUTH method to send email via an email server that requires user authentication. This method prevents unauthorized users from accessing the email server. You can use SMTP-AUTH for email notification and email reports (available for certain models).
Home > Security > Network Security Features > Send an Email Securely > Send an Email Securely Using SSL/TLS Send an Email Securely Using SSL/TLS Your Brother machine supports SSL/TLS methods to send an email via an email server that requires secure SSL/TLS communication. To send email via an email server that is using SSL/TLS communication, you must configure SMTP over SSL/TLS. We recommend using Web Based Management to configure SSL/TLS.
You must configure your machine's SMTP communication method to match the method used by your email server. For details about your email server settings, contact your network administrator or your ISP.
Home > Mobile/Web Connect Mobile/Web Connect • Brother Web Connect • Google Cloud Print • AirPrint • Mobile Printing for Windows • Mopria® Print Service • Brother iPrint&Scan for Mobile Devices • Near-Field Communication (NFC) 388
Home > Mobile/Web Connect > Brother Web Connect Brother Web Connect Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL • Brother Web Connect Overview • Online Services Used with Brother Web Connect • Conditions for Using Brother Web Connect • Set Up Brother Web Connect • Scan and Upload Documents Using Brother Web Connect • Download and Print Documents Using Brother Web Connect 389
Home > Mobile/Web Connect > Brother Web Connect > Brother Web Connect Overview Brother Web Connect Overview Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Certain websites provide services that allow users to upload and view images and files on the websites. Your Brother machine can scan images and upload them to these services, and also download and print images that are already uploaded to these services. 1. Printing 2. Scanning 3. Photos, images, documents and other files 4.
Home > Mobile/Web Connect > Brother Web Connect > Online Services Used with Brother Web Connect Online Services Used with Brother Web Connect Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Use Brother Web Connect to access services from your Brother machine: To use Brother Web Connect, you must have an account with the online service you want to use. If you do not already have an account, use a computer to access the service's website and create an account.
Accessible Services Evernote® Brother Creative Center JPEG JPEG - PDF 2 PDF 2 DOCX DOCX XLSX XLSX PPTX PPTX TIFF TIFF XPS XPS Google Drive™ Dropbox OneDrive Box OneNote Upload scanned images 1 DOC/XLS/PPT formats are also available for downloading and printing images. 2 For upload scanned images, PDF includes Searchable PDF, Signed PDF, Secure PDF and PDF/A. (For Hong Kong, Taiwan and Korea) Brother Web Connect supports only file names written in English.
Home > Mobile/Web Connect > Brother Web Connect > Conditions for Using Brother Web Connect Conditions for Using Brother Web Connect Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL • Brother Software Installation for Using Brother Web Connect • Configure the Proxy Server Settings Using Your Brother Machine's Control Panel • Configure the Proxy Server Settings Using Web Based Management 393
Home > Mobile/Web Connect > Brother Web Connect > Conditions for Using Brother Web Connect > Brother Software Installation for Using Brother Web Connect Brother Software Installation for Using Brother Web Connect Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL The initial installation of Brother Web Connect requires a computer that has access to the Internet and has the Brother machine's software installed.
Home > Mobile/Web Connect > Brother Web Connect > Conditions for Using Brother Web Connect > Configure the Proxy Server Settings Using Your Brother Machine's Control Panel Configure the Proxy Server Settings Using Your Brother Machine's Control Panel Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL If your network uses a proxy server, the following proxy server information must be configured on the machine: • Proxy server address • Port number • User Name • Password 1.
Home > Mobile/Web Connect > Brother Web Connect > Conditions for Using Brother Web Connect > Configure the Proxy Server Settings Using Web Based Management Configure the Proxy Server Settings Using Web Based Management Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL If your network uses a proxy server, the following proxy server information must be configured using Web Based Management: • Proxy server address • Port number • User Name • Password We recommend Microsoft Internet Explo
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect Set Up Brother Web Connect Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL • Brother Web Connect Setup Overview • Create an Account for Each Online Service Before Using Brother Web Connect • Apply for Brother Web Connect Access • Register an Account on Your Brother Machine for Brother Web Connect • Set Up Brother Web Connect for Brother CreativeCenter 397
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Brother Web Connect Setup Overview Brother Web Connect Setup Overview Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Configure the Brother Web Connect settings using the following procedure (when using Brother CreativeCenter, this procedure is not necessary): Step 1: Create an account with the service you want to use. Access the service's website using a computer and create an account.
2. Web Service Your Brother machine can now use the service.
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Create an Account for Each Online Service Before Using Brother Web Connect Create an Account for Each Online Service Before Using Brother Web Connect Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL To use Brother Web Connect to access an online service, you must have an account with that online service. If you do not already have an account, use a computer to access the service's website and create an account.
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Apply for Brother Web Connect Access Apply for Brother Web Connect Access Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL To use Brother Web Connect to access online services, you must first apply for Brother Web Connect access using a computer that has the Brother Software installed. 1.
2. Select the service you want to use. The actual screen may differ from the screen shown above. 3. Follow the on-screen instructions and apply for access. When finished, your temporary ID will appear.
4. Make a note of your temporary ID, as you will need it to register accounts to the machine. The temporary ID is valid for 24 hours. 5. Close the web browser. Now that you have a Brother Web Connect access ID, you must register this ID on your machine, and then use your machine to access the web service you want to use.
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Register an Account on Your Brother Machine for Brother Web Connect Register an Account on Your Brother Machine for Brother Web Connect Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL You must enter your Brother Web Connect account information and configure your machine so that it can use Brother Web Connect to access the service you want.
Registration is complete and your machine can now access the service.
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Set Up Brother Web Connect for Brother CreativeCenter Set Up Brother Web Connect for Brother CreativeCenter Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Brother Web Connect is set up to work with Brother CreativeCenter automatically. No configuration is needed to create the calendars, business cards, posters and greeting cards available at www.brother.com/creativecenter.
Home > Mobile/Web Connect > Brother Web Connect > Scan and Upload Documents Using Brother Web Connect Scan and Upload Documents Using Brother Web Connect Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Upload your scanned photos and documents directly to a web service without using a computer. • When scanning and uploading JPEG files, black and white scanning is not available.
Home > Mobile/Web Connect > Brother Web Connect > Download and Print Documents Using Brother Web Connect Download and Print Documents Using Brother Web Connect Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Documents that have been uploaded to your account can be downloaded directly to your machine and printed.
Home > Mobile/Web Connect > Brother Web Connect > Download and Print Documents Using Brother Web Connect > Download and Print Using Web Services Download and Print Using Web Services Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL For information on Brother CreativeCenter Templates, see Related Information. 1. Press d or c to display the [Web] option. 2. Press [Web]. • If information regarding the Internet connection appears on the machine’s LCD, read the information and press [OK].
Home > Mobile/Web Connect > Brother Web Connect > Download and Print Documents Using Brother Web Connect > Download and Print Brother CreativeCenter Templates Download and Print Brother CreativeCenter Templates Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Brother CreativeCenter is not available in all countries. 1. Press a or b to display [Outline&Scan]. • Occasionally, updates or announcements about Brother Web Connect's features will appear on the LCD.
Home > Mobile/Web Connect > Google Cloud Print Google Cloud Print • Google Cloud Print Overview • Before Using Google Cloud Print • Print from Google Chrome™ or Chrome OS™ • Print from Google Drive™ for Mobile • Print from Gmail™ Webmail Service for Mobile 411
Home > Mobile/Web Connect > Google Cloud Print > Google Cloud Print Overview Google Cloud Print Overview Google Cloud Print™ is a Google service that allows you to print to a printer registered to your Google account using a network-compatible device (such as a mobile phone or computer) without installing the printer driver on the device. Printing from Android™ apps requires installing the Google Cloud Print™ app from the Google Play™ Store. 11 22 33 4 1. Print request 2. Internet 3.
Home > Mobile/Web Connect > Google Cloud Print > Before Using Google Cloud Print Before Using Google Cloud Print • Network Settings for Using Google Cloud Print • Register Your Machine with Google Cloud Print Using Google Chrome™ • Register Your Machine with Google Cloud Print Using Web Based Management 413
Home > Mobile/Web Connect > Google Cloud Print > Before Using Google Cloud Print > Network Settings for Using Google Cloud Print Network Settings for Using Google Cloud Print In order to use Google Cloud Print™, your Brother machine must be connected to a network that has access to the Internet, either through a wired or wireless connection. To connect and configure your machine correctly, see the Quick Setup Guide or related topics in this guide.
Home > Mobile/Web Connect > Google Cloud Print > Before Using Google Cloud Print > Register Your Machine with Google Cloud Print Using Google Chrome™ Register Your Machine with Google Cloud Print Using Google Chrome™ Make sure you have already created a Google Account. If you do not have an account, use a computer or mobile device to access the Google website (https://accounts.google.com/signup) and create an account. Make sure your Brother machine is idle before starting the registration process.
Home > Mobile/Web Connect > Google Cloud Print > Before Using Google Cloud Print > Register Your Machine with Google Cloud Print Using Web Based Management Register Your Machine with Google Cloud Print Using Web Based Management Make sure you have already created a Google Account. If you do not have an account, use a computer or mobile device to access the Google website (https://accounts.google.com/signup) and create an account.
Home > Mobile/Web Connect > Google Cloud Print > Print from Google Chrome™ or Chrome OS™ Print from Google Chrome™ or Chrome OS™ 1. Make sure your Brother machine is turned on. 2. Open the web page that you want to print. 3. Click the Google Chrome™ menu icon. 4. Click Print. 5. Select your machine from the printer list. 6. Change print options, if needed. 7. Click Print.
Home > Mobile/Web Connect > Google Cloud Print > Print from Google Drive™ for Mobile Print from Google Drive™ for Mobile 1. Make sure your Brother machine is turned on. 2. Access Google Drive™ from your Android™ or iOS device’s web browser. 3. Open the document that you want to print. 4. Tap the menu icon. 5. Tap Print. 6. Select your machine from the printer list. 7. Change print options, if needed. 8. Tap or Print.
Home > Mobile/Web Connect > Google Cloud Print > Print from Gmail™ Webmail Service for Mobile Print from Gmail™ Webmail Service for Mobile 1. Make sure your Brother machine is turned on. 2. Access the Gmail™ webmail service from your Android™ or iOS device’s web browser. 3. Open the email that you want to print. 4. Tap the menu icon. If Print appears beside the attachment name, you can also print the attachment. Tap Print, and then follow the instructions on your mobile device. 5. Tap Print. 6.
Home > Mobile/Web Connect > AirPrint AirPrint • AirPrint Overview • Before Using AirPrint • Print Using AirPrint • Scan Using AirPrint • Send a Fax Using AirPrint (For MFC Models) 420
Home > Mobile/Web Connect > AirPrint > AirPrint Overview AirPrint Overview AirPrint is a printing solution for Apple operating systems that allows you to wirelessly print photos, email, web pages and documents from your iPad, iPhone, iPod touch and Mac computer without the need to install a driver. AirPrint also lets you send faxes directly from your Mac computer without printing them and lets you scan documents to your Mac computer.
Home > Mobile/Web Connect > AirPrint > Before Using AirPrint Before Using AirPrint • Network Settings for Using AirPrint • Disable and Enable AirPrint Using Web Based Management (Web Browser) 422
Home > Mobile/Web Connect > AirPrint > Before Using AirPrint > Network Settings for Using AirPrint Network Settings for Using AirPrint In order to use AirPrint, your mobile device must connect to the wireless network to which your Brother machine is connected. AirPrint supports wireless connections that use infrastructure mode or Wi-Fi Direct®. To configure your mobile device for a wireless network, refer to your mobile device’s user’s guide.
Home > Mobile/Web Connect > AirPrint > Before Using AirPrint > Disable and Enable AirPrint Using Web Based Management (Web Browser) Disable and Enable AirPrint Using Web Based Management (Web Browser) Confirm that your Brother machine is connected to the same network as your computer. 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.2 3. No password is required by default.
Home > Mobile/Web Connect > AirPrint > Print Using AirPrint Print Using AirPrint • Print from iPad, iPhone, or iPod Touch • Before Using AirPrint (macOS) • Print Using AirPrint (macOS) 425
Home > Mobile/Web Connect > AirPrint > Print Using AirPrint > Print from iPad, iPhone, or iPod Touch Print from iPad, iPhone, or iPod Touch The procedure used to print may vary by application. Safari is used in the example below. 1. Make sure your Brother machine is turned on. 2. Use Safari to open the page that you want to print. 3. Tap or . 4. Tap Print. 5. Make sure your Brother machine is selected. 6. If a different machine (or no printer) is selected, tap Printer.
Home > Mobile/Web Connect > AirPrint > Print Using AirPrint > Before Using AirPrint (macOS) Before Using AirPrint (macOS) Before printing using macOS, add your Brother machine to the printer list on your Mac computer. 1. Select System Preferences from the Apple Menu. 2. Click Printers & Scanners. 3. Click the + icon below the Printers pane on the left. 4. Click Add Printer or Scanner…. The Add screen appears. 5. Select your Brother machine, and then select AirPrint from the Use pop-up menu. 6. Click Add.
Home > Mobile/Web Connect > AirPrint > Print Using AirPrint > Print Using AirPrint (macOS) Print Using AirPrint (macOS) The procedure used to print may vary by application. Safari is used in the example below. Before printing, make sure your Brother machine is in the printer list on your Mac computer. 1. Make sure your Brother machine is turned on. 2. On your Mac computer, use Safari to open the page that you want to print. 3. Click the File menu, and then select Print. 4.
Home > Mobile/Web Connect > AirPrint > Scan Using AirPrint Scan Using AirPrint • Before Scanning Using AirPrint (macOS) • Scan Using AirPrint (macOS) • Scan from Your Computer (Mac) 429
Home > Mobile/Web Connect > AirPrint > Scan Using AirPrint > Before Scanning Using AirPrint (macOS) Before Scanning Using AirPrint (macOS) Before scanning using macOS, add your Brother machine to the scanner list on your Mac computer. 1. Select System Preferences from the Apple Menu. 2. Click Printers & Scanners. 3. Click the + icon below the Scanners pane on the left. 4. Click Add Printer or Scanner…. The Add screen appears. 5.
Home > Mobile/Web Connect > AirPrint > Scan Using AirPrint > Scan Using AirPrint (macOS) Scan Using AirPrint (macOS) Before scanning, make sure your Brother machine is in the scanner list on your Mac computer. 1. Load your document. 2. Select System Preferences from the Apple menu. 3. Click Printers & Scanners. 4. Select your Brother machine from the scanner list. 5. Click the Scan tab, and then click the Open Scanner… button. The Scanner screen appears. 6.
Home > Mobile/Web Connect > AirPrint > Send a Fax Using AirPrint (For MFC Models) Send a Fax Using AirPrint (For MFC Models) • Before Sending a Fax Using AirPrint (macOS) • Send a Fax Using AirPrint (macOS) 432
Home > Mobile/Web Connect > AirPrint > Send a Fax Using AirPrint (For MFC Models) > Before Sending a Fax Using AirPrint (macOS) Before Sending a Fax Using AirPrint (macOS) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Before sending a fax, add your Brother machine to the printer list on your Mac computer. Make sure your Brother machine is connected to the telephone line and works correctly. 1. Select System Preferences from the Apple Menu. 2.
Home > Mobile/Web Connect > AirPrint > Send a Fax Using AirPrint (For MFC Models) > Send a Fax Using AirPrint (macOS) Send a Fax Using AirPrint (macOS) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Make sure your Brother machine is in the printer list on your Mac computer. Apple TextEdit is used in the example below. • AirPrint supports only black and white fax documents. 1. Make sure your Brother machine is turned on. 2.
Home > Mobile/Web Connect > Mobile Printing for Windows Mobile Printing for Windows Mobile printing for Windows is a function to print wirelessly from your Windows mobile device. You can connect to the same network that your Brother machine is connected to and print without installing the printer driver on the device. Many Windows apps support this function. 2 1 3 1. Windows mobile device (Windows 10 Mobile or later) 2. Wi-Fi® connection 3.
Home > Mobile/Web Connect > Mopria® Print Service Mopria® Print Service Mopria® Print Service is a print feature on Android™ mobile devices (Android™ version 4.4 or later) developed by the Mopria® Alliance. With this service, you can connect to the same network as your machine and print without additional setup. Many native Android™ apps support printing. 2 1 3 1. Android™ 4.4 or later 2. Wi-Fi® Connection 3.
Home > Mobile/Web Connect > Brother iPrint&Scan for Mobile Devices Brother iPrint&Scan for Mobile Devices Use Brother iPrint&Scan to print and scan from various mobile devices. • For Android™ Devices Brother iPrint&Scan allows you to use features of your Brother machine directly from your Android™ device, without using a computer. Download and install Brother iPrint&Scan from the Google Play™ Store app.
Home > Mobile/Web Connect > Near-Field Communication (NFC) Near-Field Communication (NFC) Related Models: HL-L2395DW/MFC-L2750DW/MFC-L2750DWXL Near-Field Communication (NFC) allows for simple transactions, data exchange, and wireless connections between two devices that are in close range of each other.
Home > ControlCenter ControlCenter Use Brother's ControlCenter software utility to quickly access your frequently-used applications. Using ControlCenter gives you direct access to specific applications.
Home > ControlCenter > ControlCenter4 (Windows) ControlCenter4 (Windows) • Change the Operation Mode in ControlCenter4 (Windows) • Scan Using ControlCenter4 Home Mode (Windows) • Scan Using ControlCenter4 Advanced Mode (Windows) • Set Up the Brother Machine Using ControlCenter4 (Windows) • Create a Custom Tab Using ControlCenter4 Advanced Mode (Windows) 440
Home > ControlCenter > ControlCenter4 (Windows) > Change the Operation Mode in ControlCenter4 (Windows) Change the Operation Mode in ControlCenter4 (Windows) ControlCenter4 has two operation modes: Home Mode and Advanced Mode. You can change modes at any time. Home Mode Advanced Mode • Home Mode ControlCenter4 Home Mode lets you access your machine's main features easily.
ControlCenter4 Advanced Mode gives you more control over the details of your machine's features and allows you to customize one-button scan actions. To change operation mode: 1. Click the (ControlCenter4) icon in the task tray, and then select Open. 2. Click the Configuration button, and then select Mode Select. 3. The mode selection dialog box appears. Select either the Home Mode or Advanced Mode option. 4. Click OK.
Home > ControlCenter > ControlCenter4 (Windows) > Scan Using ControlCenter4 Home Mode (Windows) Scan Using ControlCenter4 Home Mode (Windows) Use ControlCenter4 Home Mode to access your machine's main features.
Home > ControlCenter > ControlCenter4 (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) Scan Using ControlCenter4 Advanced Mode (Windows) ControlCenter4 Advanced Mode gives you more control over the details of your machine's features and allows you to customize one-button scan actions.
Home > ControlCenter > ControlCenter4 (Windows) > Set Up the Brother Machine Using ControlCenter4 (Windows) Set Up the Brother Machine Using ControlCenter4 (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If Secure Function Lock is set to On, you cannot use Remote Setup. 1. Click the (ControlCenter4) icon in the task tray, and then click Open. 2. Click the Device Settings tab. 3. Click the Remote Setup button. 4.
OK Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, confirm that your data is correct, and then click OK. Cancel Click to exit the Remote Setup Program without uploading data to the machine. Apply Click to upload data to the machine without exiting the Remote Setup Program. 5. Click OK.
Home > ControlCenter > ControlCenter4 (Windows) > Create a Custom Tab Using ControlCenter4 Advanced Mode (Windows) Create a Custom Tab Using ControlCenter4 Advanced Mode (Windows) You can create up to three customized tabs, each including up to five customized buttons, with your preferred settings. Select Advanced Mode as the mode setting for ControlCenter4. 1. Click the (ControlCenter4) icon in the task tray, and then click Open. 2. Click the Configuration button, and then select Create custom tab.
Related Information • ControlCenter4 (Windows) 448
Home > Brother iPrint&Scan for Windows and Mac Brother iPrint&Scan for Windows and Mac • Brother iPrint&Scan Overview • Brother iPrint&Scan for Mobile Devices • Scan Using Brother iPrint&Scan (Mac) 449
Home > Brother iPrint&Scan for Windows and Mac > Brother iPrint&Scan Overview Brother iPrint&Scan Overview Use Brother iPrint&Scan for Windows and Mac to print and scan from your computer. The following screen shows an example of Brother iPrint&Scan for Windows. The actual screen may differ depending on the version of the application. • For Windows Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download the latest application.
Home > Troubleshooting Troubleshooting Use this section to resolve typical problems you may encounter when using your Brother machine. You can correct most problems yourself. IMPORTANT For technical help, you must call the country where you bought the machine. Calls must be made from within that country. Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability.
Home > Troubleshooting > Error and Maintenance Messages Error and Maintenance Messages As with any sophisticated office product, errors may occur and supply items may have to be replaced. If this happens, your machine identifies the error or required routine maintenance and shows the appropriate message. The most common error and maintenance messages are shown in the table. You can correct most errors and perform routine maintenance by yourself. If you need more tips: Visit us at support.brother.
Error Message Cause Action Receive Mode from Manual to another mode. Drum ! The corona wire on the drum unit must be cleaned. Clean the corona wire on the drum unit. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Put the toner cartridge in the drum unit. Then reinstall the toner cartridge and drum unit assembly in the machine. Drum End Soon The drum unit is near the end of its life. Order a new drum unit before you get the Replace Drum message.
Error Message Cause Action the drum unit. Reinstall the toner cartridge and drum unit assembly back in the machine. If the problem continues, replace the toner cartridge with a new one. Out of Memory The machine's memory is full. If a fax-sending or copy operation is in process Do one of the following: • Press Start to send or copy the scanned pages. • Press Stop/Exit and wait until the other operations in progress finish, and then try again. • Print the faxes that are in the memory.
Error Message Cause Action Scan Unable XX The machine has a mechanical problem. • (MFC-L2690DW/ MFC-L2690DWXL/ MFC-L2710DW/MFC-L2717DW) To prevent you from losing the received fax data in the machine's memory, transfer the data to another Fax machine or to your computer before turning off the machine. • Press and hold to turn off the machine, and then turn it on again. • If the problem continues, contact Brother Customer Service.
Error Message Cause Action Toner Low If the LCD displays this message, you Order a new toner cartridge now so a can still print. The toner cartridge is replacement toner cartridge is near the end of its life. available when the LCD displays Replace Toner. Wait for a while The temperature of the inside of the machine is too hot. The machine will pause its current print job and go into cooling down mode.
Error Message Cause Action Disconnected The other person or other person's fax machine stopped the call. Try to send or receive again. Document Jam If calls are stopped repeatedly and you are using a VoIP (Voice over IP) system, try changing the Compatibility to Basic (for VoIP). The document was not inserted or fed Remove the jammed paper from the correctly, or the document scanned ADF unit. from the ADF was too long. Clear any debris or scraps of paper from the ADF unit paper path. Press .
Error Message Cause Action subscribed to the Caller ID service from your telephone company. No Paper The machine is out of paper, or paper • is not loaded correctly in the paper tray. Refill paper in the paper tray. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. • Do not overfill the paper tray. No Response/Busy The number you dialed does not answer or is busy.
Error Message Cause Action Replace Drum It is time to replace the drum unit. Replace the drum unit. The drum unit counter was not reset when a new drum was installed. Reset the drum unit counter. Replace Toner The toner cartridge is at the end of its Replace the toner cartridge with a life. The machine stops all print new one. operations. While memory is available, faxes are stored in the memory. Scan Unable Scan Unable XX The document is too long for 2‑sided scanning.
Error Message Cause Action Debris may be stuck between the lower part of the touchscreen and its frame. Insert a piece of stiff paper between the lower part of the touchscreen and its frame and slide it back and forth to push out the debris.
Home > Troubleshooting > Error Messages When Using the Brother Web Connect Feature Error Messages When Using the Brother Web Connect Feature Your Brother machine displays an error message if an error occurs. The most common error messages are shown in the table. You can correct most errors yourself. If, after reading this table, you still need help, the Brother Solutions Center offers the latest troubleshooting tips. Go to the Brother Solutions Center at support.brother.com.
Server Error Error Messages Cause Action Server Error 01 The machine's authentication information (needed to access the service) has expired or is invalid. Apply for Brother Web Connect access again to receive a new temporary ID, and then use the new ID to register the account to the machine. The file you are trying to upload may have one of the following problems: The file cannot be used: Authentication failed. Do the following: 1. Go to http://bwc.brother.com to get a new temporary ID. 2.
Home > Troubleshooting > Document Jams Document Jams Related Models: DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/ MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL • Document is Jammed in the Top of the ADF Unit • Document is Jammed under the Document Cover • Remove Small Scraps of Paper Jammed in the ADF 463
Home > Troubleshooting > Document Jams > Document is Jammed in the Top of the ADF Unit Document is Jammed in the Top of the ADF Unit Related Models: DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/ MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Remove any paper from the ADF that is not jammed. 2. Open the ADF cover. 3. Pull the jammed document out to the left. If the document rips or tears, be sure you remove any debris or scraps to prevent future jams. 4. Close the ADF cover. 5.
Home > Troubleshooting > Document Jams > Document is Jammed under the Document Cover Document is Jammed under the Document Cover Related Models: DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/ MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Remove any paper from the ADF that is not jammed. 2. Lift the document cover. 3. Pull the jammed document out to the right. If the document rips or tears, be sure you remove any debris or scraps to prevent future jams. 4. Close the document cover. 5.
Home > Troubleshooting > Document Jams > Remove Small Scraps of Paper Jammed in the ADF Remove Small Scraps of Paper Jammed in the ADF Related Models: DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/ MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Lift the document cover. 2. Insert a piece of stiff paper, such as cardstock, into the ADF to push any small paper scraps through. 3. Close the document cover. 4.
Home > Troubleshooting > Paper Jams Paper Jams Always remove the remaining paper from the paper tray and straighten the stack when you are adding new paper. This helps prevent multiple sheets of paper from feeding through the machine at one time and prevents paper jams.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Paper Tray Paper is Jammed in the Paper Tray If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these steps: 1. Pull the paper tray completely out of the machine. 2. Slowly pull out the jammed paper. Pulling the jammed paper downward using both hands allows you to remove the paper more easily. 3.
Related Information • Paper Jams 469
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Output Paper Tray Paper is Jammed in the Output Paper Tray When the paper is jammed in the output paper tray, follow these steps: 1. Use both hands to open the scanner. 2. Remove the paper. 3. Push the scanner down with both hands to close it.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Back of the Machine Paper is Jammed in the Back of the Machine If the machine's control panel or the Status Monitor indicates that there is a jam in the back (Rear) of the machine, follow these steps: 1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine. 2. Open the back cover. 3. Pull the blue tabs at the left and right sides toward you to release the fuser cover.
5. Close the fuser cover. If you print on envelopes, pull down the green envelope levers to the envelope position again before closing the back cover. 6. Close the back cover until it locks in the closed position.
Home > Troubleshooting > Paper Jams > Paper is Jammed inside the Machine Paper is Jammed inside the Machine If the machine's control panel or the Status Monitor indicates that there is a jam inside the machine, follow these steps: 1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine. 2. Open the front cover. 3. Remove the toner cartridge and drum unit assembly. WARNING HOT SURFACE The machine's internal parts will be extremely hot.
6. Close the front cover.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the 2-sided Tray Paper is Jammed in the 2-sided Tray If the machine's control panel or the Status Monitor indicates that there is a jam in the 2-sided paper tray, follow these steps: 1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine. 2. Pull the paper tray completely out of the machine. 3. At the back of the machine, pull the 2‑sided tray completely out of the machine. 4.
6. If paper is not caught inside the 2-sided tray, open the back cover. WARNING HOT SURFACE The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them. 7. Use both hands to gently pull the jammed paper out of the back of the machine. 8. Close the back cover until it locks in the closed position. 9. Put the 2-sided tray firmly back in the rear of the machine. 10. Put the paper tray firmly back in the front of the machine.
Home > Troubleshooting > Printing Problems Printing Problems Difficulties Suggestions No printout Check the machine is not in Power Off mode. If the machine is in Power Off mode, press on the control panel, and then send the print data again. Check that the correct printer driver has been installed and selected. Check to see if the Status Monitor or the machine's control panel displays an error status.
Difficulties Suggestions The machine is not printing or has stopped printing. Cancel the print job and clear it from the machine's memory. The printout may be incomplete. Send the print data again. See Related Information:Cancel a Print Job. The headers or footers appear when the document displays on the screen but they do not show up when it is printed. There is an unprintable area on the top and bottom of the page. Adjust the top and bottom margins in your document to allow for this.
Related Topics: • Monitor the Status of the Machine from Your Computer (Windows) • Monitor the Status of the Machine from Your Computer (Mac) • Cancel a Print Job • Clean the Paper Pick-up Rollers 479
Home > Troubleshooting > Improve the Print Quality Improve the Print Quality If you have a print quality problem, print a test page first. If the printout looks good, the problem is probably not the machine. Check the interface cable connections and try printing a different document. If the printout or test page printed from the machine has a quality problem, check the examples of poor print quality and follow the recommendations in the table.
Examples of poor print quality Recommendation • Clean the drum unit. • Replace the drum unit with a new drum unit. • Replace the toner cartridge with a new toner cartridge. • The fuser unit may be contaminated. Contact Brother Customer Service. In USA: 1-877-BROTHER (1-877-276-8437) In Canada: www.brother.ca/support ABCDEFGH abcdefghijk ABCD abcde 01234 • Make sure the media type setting in the driver matches the type of paper you are using. • Clean the drum unit.
Examples of poor print quality Recommendation • Check the machine's environment. Conditions such as high humidity and high temperatures may cause this print quality problem. • Clean the drum unit. • If the problem is not solved after printing a few pages, replace the drum unit with a new drum unit. • Make 10-15 copies of a blank, white sheet of paper. If the problem is not solved after printing the blank pages, the drum unit may have foreign material, such as glue from a label, stuck on the drum.
Examples of poor print quality ABCDEFGH abcdefghijk ABCD abcde 01234 Recommendation • Make sure foreign material such as a torn piece of paper, sticky notes or dust is not inside the machine and around the toner cartridge and drum unit. • The toner cartridge may be damaged. Replace the toner cartridge with a new toner cartridge. • The drum unit may be damaged. Replace the drum unit with a new drum unit.
Examples of poor print quality Recommendation • Make sure the media type setting in the printer driver matches the type of paper you are using. • Choose Improve Toner Fixing mode in the printer driver. If this selection does not provide enough improvement, change the printer driver setting in Media Type to a thick setting. If you are printing an envelope, choose Env. Thick in the media type setting.
Home > Troubleshooting > Telephone and Fax Problems Telephone and Fax Problems Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Telephone Line or Connections Difficulties Suggestions Dialing does not work. (No dial tone) Check all line cord connections. Make sure the telephone line cord is plugged into the telephone wall jack and the LINE jack of the machine. Make sure your machine has a dial tone by pressing the Hook button in Fax mode.
Difficulties Suggestions interruption is crucial to your business, we recommend using a separate telephone line with no custom features. Receiving Faxes Difficulties Suggestions Cannot receive a fax. Check all line cord connections. Make sure the telephone line cord is plugged into the telephone wall jack and the LINE jack of the machine. If you subscribe to DSL, VoIP, or MagicJack services, call your service provider for connection instructions.
Difficulties Suggestions • If the Receive Mode is set to Manual, DO NOT adjust the Ring Delay setting. Have someone send you a test fax: • If you received the test fax successfully, your machine is operating correctly. Remember to reset your Ring Delay or answering machine setting back to your original setting. If receiving problems recur after resetting the Ring Delay, then a person, device, or subscriber service is answering the fax call before the machine has a chance to answer.
Difficulties Suggestions dial tone by pressing the Hook button in Fax mode. If you subscribe to DSL, VoIP, or magicJack services, call your service provider for connection instructions. Make sure you pressed Fax and the machine is in Fax mode. Print the Transmission Verification Report and check for an error. Contact your administrator to check your Secure Function Lock Settings. Ask the other party to check that the receiving machine has paper. Poor sending quality.
Difficulties Suggestions Turn on Auto Reduction.
Home > Troubleshooting > Telephone and Fax Problems > Set Dial Tone Detection Set Dial Tone Detection Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Setting the Dial Tone to [Detection] will shorten the Dial Tone detect pause. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2.
Home > Troubleshooting > Telephone and Fax Problems > Set Telephone Line Compatibility for Interference and VoIP Systems Set Telephone Line Compatibility for Interference and VoIP Systems Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Problems sending and receiving faxes due to possible interference on the telephone line may be solved by reducing the modem speed to minimize errors in fax transmission.
Related Information • Telephone and Fax Problems 492
Home > Troubleshooting > Network Problems Network Problems • Error Messages for Network Problems • Where Can I Find My Brother Machine's Network Settings? • I Cannot Complete the Wireless Network Setup Configuration • Use the Network Connection Repair Tool (Windows) • My Brother Machine Cannot Print, Scan, or PC-FAX Receive over the Network • I Want to Check that My Network Devices are Working Correctly 493
Home > Troubleshooting > Network Problems > Error Messages for Network Problems Error Messages for Network Problems Your Brother machine will display an error message if an error occurs. The most common error messages are shown in the chart.
Error Messages Wrong Date & Time, contact your administrator. Cause Action machine cannot find your mobile device. • Move your Brother machine and the mobile device to an obstruction-free area. • If you are manually configuring the Wi-Fi Direct network, make sure you have entered the correct password. • If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP.
Home > Troubleshooting > Network Problems > Where Can I Find My Brother Machine's Network Settings? Where Can I Find My Brother Machine's Network Settings? • Print the Network Configuration Report • Change Machine Settings from Your Computer 496
Home > Troubleshooting > Network Problems > I Cannot Complete the Wireless Network Setup Configuration I Cannot Complete the Wireless Network Setup Configuration Turn your wireless router off and back on. Then, try to configure the wireless settings again. If you are unable to resolve the problem, follow the instructions below: Investigate the problem using the WLAN Report. Cause Action Your security settings (SSID/ • Network Key) are not correct.
Cause Action Direct configuration, do the following: • Interface If you are using your Brother machine as a client, confirm how many devices are allowed in the current Wi-Fi Direct network, and then check how many devices are connected. For Windows If your wireless connection has been interrupted, and you have checked and tried all of the above, we recommend using the Network Connection Repair Tool.
Home > Troubleshooting > Network Problems > Use the Network Connection Repair Tool (Windows) Use the Network Connection Repair Tool (Windows) Use the Network Connection Repair Tool to fix the Brother machine's network settings. It will assign the correct IP address and Subnet Mask. • Windows 7/Windows 8/Windows 10 You must log on with Administrator rights. • Make sure the Brother machine is turned on and is connected to the same network as your computer. 1.
Home > Troubleshooting > Network Problems > My Brother Machine Cannot Print, Scan, or PC-FAX Receive over the Network My Brother Machine Cannot Print, Scan, or PC-FAX Receive over the Network Cause Action Interface Your security software blocks your machine's access to the network. (The Network scanning feature does not work. ) • Wired/Wireless Windows Configure the third-party Security/Firewall Software to allow Network scanning.
Cause Action The failed print job is still in your computer's print queue. • If the failed print job is still in your computer's print queue, delete it. Wired/Wireless • Otherwise, double-click the printer icon in the following folder and cancel all documents: - Interface Windows 7 Click (Start) > Devices and Printers > Printers and Faxes. - Windows 8 Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings > Control Panel.
Home > Troubleshooting > Network Problems > I Want to Check that My Network Devices are Working Correctly I Want to Check that My Network Devices are Working Correctly Check Action Interface Wired/Wireless Check that your Brother Check the following: machine, access point/ • The power cord is connected correctly and the Brother machine is router, or network hub is turned on. turned on. • The access point/router or hub is turned on and its link button is blinking.
Home > Troubleshooting > Google Cloud Print Problems Google Cloud Print Problems Difficulty Suggestions My Brother machine is not displayed in the printer list. Make sure your machine is turned on. Confirm that Google Cloud Print™ is enabled. Confirm that your machine is registered with Google Cloud Print™. If it is not registered, try to register again. I cannot print. Make sure your machine is turned on. Confirm your network settings. See Related Information.
Home > Troubleshooting > AirPrint Problems AirPrint Problems Difficulty Suggestions My Brother machine is not displayed in the printer list. Make sure your Brother machine is turned on. Confirm the network settings. See Related Information. Move the mobile device closer to the wireless access point/router, or to your Brother machine. I cannot print. Make sure your Brother machine is turned on. Confirm the network settings. See Related Information.
Home > Troubleshooting > Other Problems Other Problems Difficulties Suggestions The machine will not turn on. Adverse conditions on the power connection (such as lightning or a power surge) may have triggered the machine’s internal safety mechanisms. Unplug the power cord. Wait for ten minutes, then plug in the power cord and press to turn on the machine. If the problem is not solved, press and hold to turn off the machine.
Difficulties Suggestions Cannot make a copy. Make sure you pressed Copy and the machine is in Copy mode. Contact your administrator to check your Secure Function Lock Settings. Vertical black line appears in copies. Black vertical lines on copies are typically caused by dirt or correction fluid on the glass strip, or the corona wire is dirty. Clean the glass strip and scanner glass and the white bar and white plastic above them. Copies are blank. Make sure you are loading the document correctly.
Home > Troubleshooting > Transfer Your Faxes or Fax Journal Report Transfer Your Faxes or Fax Journal Report Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If the LCD displays: • [Print Unable] ## • [Scan Unable] ## We recommend transferring your faxes to another fax machine or to your computer. You can also transfer the Fax Journal report to see if there are any faxes you must transfer.
Home > Troubleshooting > Transfer Your Faxes or Fax Journal Report > Transfer Faxes to Another Fax Machine Transfer Faxes to Another Fax Machine Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If you have not set up your Station ID, you cannot enter Fax Transfer mode. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2.
Home > Troubleshooting > Transfer Your Faxes or Fax Journal Report > Transfer Faxes to Your Computer Transfer Faxes to Your Computer Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Make sure you have installed the software and drivers on your computer, and then turn on PC-FAX Receive on the computer.
3. Do one of the following: • To select On or Off for the backup print setting, press [Yes]. • To turn on PC-Fax, press [No]. 4. Press .
Home > Troubleshooting > Transfer Your Faxes or Fax Journal Report > Transfer the Fax Journal Report to Another Fax Machine Transfer the Fax Journal Report to Another Fax Machine Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If you have not set up your Station ID, you cannot enter fax transfer mode. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1.
Home > Troubleshooting > Machine Information Machine Information • Check the Serial Number • Check the Firmware Version • Reset Functions Overview • Reset Your Brother Machine 512
Home > Troubleshooting > Machine Information > Check the Serial Number Check the Serial Number >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [Machine Info.] option, and then press OK. 3. Press a or b to display the [Serial No.] option, and then press OK. The machine displays the serial number on the LCD. 4.
Home > Troubleshooting > Machine Information > Check the Firmware Version Check the Firmware Version >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [Machine Info.] option, and then press OK. 3. Press a or b to display the [Version] option, and then press OK.
Home > Troubleshooting > Machine Information > Reset Functions Overview Reset Functions Overview The following reset functions are available: Unplug the interface cable before you choose Network Settings Reset function, All Settings Reset function or Factory Reset function.
Unplug the interface cable before you choose Network Settings Reset function, All Settings Reset function or Factory Reset function. HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1. Machine Reset You can reset all the machine’s settings that you have changed, such as Date and Time and Ring Delay. The Address Book, fax reports, and Call history will remain. (For MFC Models) 2.
Home > Troubleshooting > Machine Information > Reset Your Brother Machine Reset Your Brother Machine >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [Initial Setup] option, and then press OK. 3. Press a or b to display the [Reset] option, and then press OK. 4.
You can also reset the Network settings by pressing [Settings] > [All Settings] > [Network] > [Network Reset].
Home > Routine Maintenance Routine Maintenance • Replace Supplies • Clean the Machine • Check the Remaining Part Life • Pack and Ship Your Brother Machine 519
Home > Routine Maintenance > Replace Supplies Replace Supplies You must replace supplies when the machine indicates that the life of the supply is over. Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability. The toner cartridge and drum unit are two separate supplies. Make sure both are installed as an assembly. The order number of supplies may vary depending on the country.
Related Information • Routine Maintenance • Replace the Toner Cartridge • Replace the Drum Unit • Reset the Drum Counter Related Topics: • Error and Maintenance Messages • Supplies 521
Home > Routine Maintenance > Replace Supplies > Replace the Toner Cartridge Replace the Toner Cartridge 1. Make sure the machine is turned on. 2. Open the front cover. 3. Remove the toner cartridge and drum unit assembly from the machine. 4. Push down the green lock lever and take the toner cartridge out of the drum unit. 5. Unpack the new toner cartridge. 6. Remove the protective cover. 7. Push the new toner cartridge firmly into the drum unit until you hear it lock into place.
Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 8. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. Be sure to return the tab to the Home position (a). The arrow on the tab must be aligned with the arrow on the drum unit. If it is not, printed pages may have a vertical stripe. 9. Install the toner cartridge and drum unit assembly back into the machine. 10.
Related Information • Replace Supplies Related Topics: • Improve the Print Quality 524
Home > Routine Maintenance > Replace Supplies > Replace the Drum Unit Replace the Drum Unit 1. Make sure the machine is turned on. 2. Open the front cover. 3. Remove the toner cartridge and drum unit assembly from the machine. 4. Push down the green lock lever and take the toner cartridge out of the drum unit. 5. Unpack the new drum unit. 6. Push the toner cartridge firmly into the new drum unit until you hear it lock into place.
7. Install the toner cartridge and drum unit assembly back into the machine. 8. Close the front cover of the machine. After installing the new drum unit, you must reset the drum counter. See Related Information: Reset the Drum Counter. NOTE • Drum wear and tear occurs due to use and rotation of the drum and interaction with paper, toner and other materials in the paper path. In designing this product, Brother decided to use the number of rotations of the drum as a reasonable determinant of the drum life.
Home > Routine Maintenance > Replace Supplies > Reset the Drum Counter Reset the Drum Counter When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps: IMPORTANT DO NOT reset the drum counter unless you are replacing the drum unit. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1.
Home > Routine Maintenance > Clean the Machine Clean the Machine Clean the outside and inside of the machine regularly with a dry, lint-free cloth. When you replace the toner cartridge or the drum unit, make sure you clean the inside of the machine. If printed pages are stained with toner, clean the inside of the machine with a dry, lint-free cloth.
• Clean the Corona Wire • Clean the Drum Unit Using Drum Dot Print • Clean the Paper Pick-up Rollers 529
Home > Routine Maintenance > Clean the Machine > Clean the Scanner Clean the Scanner 1. Press and hold to turn off the machine. 2. Lift the document cover (1). Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with water. 1 2 3 3. In the ADF unit, clean the white bar (1) and the scanner glass strip (2) underneath it with a soft lint-free cloth moistened with water. 1 2 4.
Home > Routine Maintenance > Clean the Machine > Clean the Touchscreen LCD Clean the Touchscreen LCD Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL IMPORTANT DO NOT use any type of liquid cleaners (including ethanol). 1. Press and hold to turn off the machine. 2. Clean the touchscreen with a dry, soft lint-free cloth. 3. Press to turn on the machine.
Home > Routine Maintenance > Clean the Machine > Clean the Corona Wire Clean the Corona Wire If you have print quality problems or the control panel displays [Drum !] status, clean the corona wire. 1. Open the front cover. 2. Remove the toner cartridge and drum unit assembly from the machine. 3. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. Be sure to return the tab to the Home position (a).
Home > Routine Maintenance > Clean the Machine > Clean the Drum Unit Using Drum Dot Print Clean the Drum Unit Using Drum Dot Print If your printout has dots or other repeating marks at 3.7 in. (94 mm) intervals, the drum may have foreign material, such as glue from a label, stuck on the drum surface. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1.
10. Use the numbered markers next to the drum roller to find the mark on the drum. For example, a dot in column 2 on the check sheet means that there is a mark in drum region “2”. 11. Turn the edge of the drum unit toward you while looking at the drum surface to find the mark. IMPORTANT • To avoid print quality problems, DO NOT touch the surface of the drum unit, only the wheel on the end. 12.
NOTE DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids. 13. Push the toner cartridge firmly into the drum unit until you hear it lock into place. Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 14. Install the toner cartridge and drum unit assembly back into the machine. 15. Close the front cover of the machine. 16. Press to turn on the machine. HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL 1.
8. Push down the green lock lever and take the toner cartridge out of the drum unit. 9. Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. 10. Use the numbered markers next to the drum roller to find the mark on the drum. For example, a dot in column 2 on the check sheet means that there is a mark in drum region “2”. 11. Turn the edge of the drum unit toward you while looking at the drum surface to find the mark.
IMPORTANT • To avoid print quality problems, DO NOT touch the surface of the drum unit, only the wheel on the end. 12. Wipe the surface of the drum gently with a dry cotton swab until the mark or foreign material on the surface comes off. NOTE DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids. 13. Push the toner cartridge firmly into the drum unit until you hear it lock into place.
Related Information • Clean the Machine Related Topics: • Improve the Print Quality 538
Home > Routine Maintenance > Clean the Machine > Clean the Paper Pick-up Rollers Clean the Paper Pick-up Rollers Cleaning the paper pick-up rollers periodically may prevent paper jams by ensuring that paper feeds properly. If you have paper feed problems, clean the pick-up rollers as follows: 1. Press and hold to turn off the machine. 2. Pull the paper tray completely out of the machine. 3. If paper is loaded or something is stuck inside in the paper tray, remove it. 4.
Home > Routine Maintenance > Check the Remaining Part Life Check the Remaining Part Life >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [Machine Info.] option, and then press OK. 3. Press a or b to display the [Parts Life] option, and then press OK. 4.
Home > Routine Maintenance > Pack and Ship Your Brother Machine Pack and Ship Your Brother Machine WARNING • When you move the machine, carry the machine as shown in the illustration. • If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid any damage during transit. The machine should be adequately insured with the carrier.
5. Close the carton and tape it shut.
Home > Machine Settings Machine Settings Customize settings and features, create shortcuts, and work with options displayed on the machine's LCD to make your Brother machine a more efficient work tool.
Home > Machine Settings > Change Machine Settings from the Control Panel Change Machine Settings from the Control Panel • In the Event of Power Failure (Memory Storage) • General Settings • Save Your Favorite Settings as a Shortcut • Print Reports • Settings and Features Tables 544
Home > Machine Settings > Change Machine Settings from the Control Panel > In the Event of Power Failure (Memory Storage) In the Event of Power Failure (Memory Storage) Your menu settings are stored permanently, and in the event of a power failure will not be lost.Temporary settings (for example, Contrast, Overseas Mode) will be lost.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings General Settings • Change the Default Mode • Set the Mode Timer • Adjust the Machine's Volume • Change for Daylight Saving Time Automatically • Set Sleep Mode Countdown • About Deep Sleep Mode • Set Auto Power Off Mode • Set the Date and Time • Set the Time Zone • Adjust the LCD Backlight Brightness • Change How Long the LCD Backlight Stays On • Set Your Station ID • Set Tone or Pulse Dialing Mode (For Canada) • Red
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change the Default Mode Change the Default Mode Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW When the machine is idle or you press Stop/Exit, the machine will return to the mode you set. • For MFC models, the machine has Fax, Scan and Copy modes. The default mode is Fax. • For DCP models, the machine has Scan and Copy modes. The default mode is Copy. 1. Press Menu. 2.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the Mode Timer Set the Mode Timer Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW The machine returns to the default mode after use of the machine in a mode other than the default mode. The Mode Timer setting defines how much time the machine takes after the last operation to return to the default mode. If you choose [Off], the machine will stay in the mode you used last.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust the Machine's Volume Adjust the Machine's Volume Related Models: HL-L2395DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/ MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [General Setup] option, and then press OK. 3.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change for Daylight Saving Time Automatically Change for Daylight Saving Time Automatically You can program the machine to change automatically for Daylight Saving Time. It will reset itself forward one hour in the spring, and backward one hour in the fall. Make sure you have set the correct date and time in the Date & Time setting.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Sleep Mode Countdown Set Sleep Mode Countdown The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or a fax. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > About Deep Sleep Mode About Deep Sleep Mode If the machine is in Sleep mode and does not receive any jobs for certain length of time, the machine will automatically enter Deep Sleep mode. The length of time is based on your specific model and settings. Deep Sleep mode uses less power than Sleep mode.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Auto Power Off Mode Set Auto Power Off Mode If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is connected to a network or a telephone line , or has secure print data in the memory(Available only for certain models).
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the Date and Time Set the Date and Time Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [Initial Setup] option, and then press OK. 3.
8. To enter the time, do one of the following: • If you selected [12h Clock] as the format in the [Clock Type] setting, enter the time (in 12-hour format) using the LCD. to select the [AM] or [PM]. Press Press [OK]. • If you selected [24h Clock] as the format in the [Clock Type] setting, enter the time (in 24-hour format) using the LCD. Press [OK]. (For example: enter 19:45 for 7:45 PM.) 9. Press .
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the Time Zone Set the Time Zone Set the time zone for your location on the machine. For example, the time zone for Eastern Time in the USA and Canada is UTC-05:00. Pacific Time in the USA and Canada is UTC-08:00.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust the LCD Backlight Brightness Adjust the LCD Backlight Brightness Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL If you are having difficulty reading the LCD, changing the brightness setting may help. 1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] > [Backlight]. 2. Press the [Light], [Med] or [Dark] option. 3. Press .
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change How Long the LCD Backlight Stays On Change How Long the LCD Backlight Stays On Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL Set how long the LCD backlight stays on. 1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] > [Dim Timer]. 2. Press the option you want: • [10Secs] • [30Secs] • [1Min] • [2Mins] • [3Mins] • [5Mins] 3. Press .
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Your Station ID Set Your Station ID Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Set the machine to print your Station ID and the fax's date and time at the top of each fax you send. >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW (FAX). 1. Press 2.
6. Enter your name (up to 20 characters) using the LCD, and then press [OK]. • Press to cycle between letters, numbers and special characters. (The characters available may differ depending on your country.) • If you enter an incorrect character, press d or c to move the cursor to it and press . Press the correct character. • To enter a space, press [Space]. • For more detailed information, see Related Information. 7. Press .
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Tone or Pulse Dialing Mode (For Canada) Set Tone or Pulse Dialing Mode (For Canada) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Your Brother machine is set for a Tone dialing service. If you have a Pulse dialing (rotary) service, you must change the dialing mode. This feature is not available in some countries.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Reduce Toner Consumption Reduce Toner Consumption Using the Toner Save feature may reduce toner consumption. When Toner Save is set to on, the print on your documents appears lighter. We DO NOT recommend using the Toner Save feature for printing photo or grayscale images.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the Continue Mode Set the Continue Mode The Continue Mode forces the machine to continue printing after the control panel displays Replace Toner. The machine will continue printing until the LCD displays Toner Ended. The factory setting is Stop. • When the control panel indicates an error, you cannot change the mode. • If you continue printing in the Continue Mode, we cannot guarantee the print quality.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Learn About Receiving Faxes in Continue Mode Learn About Receiving Faxes in Continue Mode Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL The machine can store received faxes in the memory if you choose the Continue Mode when the LCD displays Replace Toner.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Add a Prefix to Every Fax Number Add a Prefix to Every Fax Number Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL The Dial Prefix setting will automatically dial a predefined number before every fax number you dial. For example: If your telephone system requires a 9 to dial an outside number, use this setting to automatically dial 9 for every fax you send.
To change the prefix number, press d or c to position the cursor under the digit to be deleted and press . Then press the correct digit. Repeat until the prefix number is correct, and then press [OK]. 5. Press .
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Prevent Dialing a Wrong Number (Dial Restriction) Prevent Dialing a Wrong Number (Dial Restriction) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL This feature prevents users from sending a fax or call to the wrong number by mistake. You can set the machine to restrict dialing when you use the dial pad, Address Book and Shortcuts.
Option Description Enter # Twice The machine will prompt you to re-enter the number, and then if you re-enter the same number correctly, the machine will start dialing. If you re-enter the wrong number, the LCD will display an error message. On The machine will restrict all fax sending and outbound calls for that dialing method. Off The machine does not restrict the dialing method. • The [Enter # Twice] setting will not work if you use an external phone or press [Hook] before entering the number.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Reduce Printing Noise Reduce Printing Noise The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower. The factory setting is off. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change the Language on the LCD Change the Language on the LCD Change the LCD language if needed. This feature is not available in some countries. >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2.
Home > Machine Settings > Change Machine Settings from the Control Panel > Save Your Favorite Settings as a Shortcut Save Your Favorite Settings as a Shortcut • Add Shortcuts • Change or Delete Shortcuts 571
Home > Machine Settings > Change Machine Settings from the Control Panel > Save Your Favorite Settings as a Shortcut > Add Shortcuts Add Shortcuts Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL You can add the Fax, Copy, Scan, Web Connect and Apps settings you use most frequently by saving them as your Shortcuts. Later you can press the Shortcut to apply these settings instead of manually re-entering them. Some Shortcut menus are not available depending on your model.
Home > Machine Settings > Change Machine Settings from the Control Panel > Save Your Favorite Settings as a Shortcut > Change or Delete Shortcuts Change or Delete Shortcuts Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL You cannot change a Web Connect Shortcut or Apps Shortcut. If you need to change them, delete them, and then add a new Shortcut. 1. Press ([Shortcuts]). 2. Press d or c to display the Shortcut you want to change. 3. Press the Shortcut you want to change.
Home > Machine Settings > Change Machine Settings from the Control Panel > Print Reports Print Reports • Reports • Print a Report 574
Home > Machine Settings > Change Machine Settings from the Control Panel > Print Reports > Reports Reports The following reports are available: Transmission (MFC models) The Transmission report prints a Transmission Verification Report of your last transmission. Address Book (MFC models) The Address Book report prints an alphabetical list of names and numbers stored in the Address Book memory.
Home > Machine Settings > Change Machine Settings from the Control Panel > Print Reports > Print a Report Print a Report >> HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/ MFC-L2717DW 1. Press Menu. 2. Press a or b to display the [Print Reports] option, and then press OK. 3. Press a or b to display the report you want to print, and then press OK. 4.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables Settings and Features Tables The Settings tables will help you understand the menu selections and options that are found in the machine’s programs. • Settings Tables (2 Line LCD MFC models) • Settings Tables (2 Line LCD DCP models) • Settings Tables (2.7" Touch Panel MFC models) • Settings Tables (2.7" Touch Panel DCP models) • Features Tables (2.7" Touch Panel MFC models) • Features Tables (2.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (2 Line LCD MFC models) Settings Tables (2 Line LCD MFC models) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW [General Setup] Level 1 Level 2 Level 3 Descriptions Default Mode - - Select the default mode. Mode Timer - - Set the idle time before the machine returns to the default mode. Tray Setting Paper Type - Set the type of paper in the paper tray.
Level 1 Level 2 Level 3 Descriptions Setup Receive 2-sided - Print received faxes on both sides of the paper. Setup Send Fax Resolution - Change the lightness or darkness of faxes you send. Contrast - Set the default resolution for outgoing faxes. Glass ScanSize - Adjust the scan area of the scanner glass to the size of the document. Real Time TX - Send a fax without using the memory. Coverpage Message Set up your own comments for the fax cover page.
Level 1 Level 2 Descriptions ID Copy Contrast Adjust the contrast for copies. 2in1/1in1 Make 2 in 1 ID copies. [Printer] For Printer Emulation Supported models Level 1 Level 2 Level 3 Descriptions Emulation - - Set the printer emulation mode. Print Options Font List HP LaserJet Print a list of the machine’s internal fonts. BR-Script 3 Test Print - Print a test page. - - Turn 2-sided printing off or on and select flip on long edge or short edge.
Level 1 Level 2 Level 3 Wired LAN TCP/IP WINS Server Specify the IP address of the primary or secondary WINS server. WLAN Descriptions DNS Server Specify the IP address of the primary or secondary DNS server. APIPA Set the machine to allocate the IP address from the link-local address range automatically. IPv6 Turn the IPv6 protocol on or off. For more detailed information, go to your model's FAQs & Troubleshooting page on the Brother support website at support.brother.com.
Level 1 Level 2 Level 3 Descriptions Wi-Fi Direct Push Button - Configure your Wi-Fi Direct network settings using the onebutton push method. PIN Code - Configure your Wi-Fi Direct network settings using WPS with a PIN code. Manual - Configure your Wi-Fi Direct network settings manually. Group Owner - Set your machine as the Group Owner. Device Info. Device Name View your machine's device name. SSID View the Group Owner's SSID.
Level 1 Level 2 Descriptions Version - Page Counter Total Check your machine's firmware version. Check the total number of pages the machine has printed during its life. Fax Copy Print Other Parts Life Toner View the approximate remaining toner life. Drum You can check the percentage of Drum life that remains available. [Initial Setup] Level 1 Level 2 Descriptions Date&Time Date&Time Add the date and time on the screen and in the headings of the faxes you send.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (2 Line LCD DCP models) Settings Tables (2 Line LCD DCP models) Related Models: HL-L2390DW/DCP-L2550DW [General Setup] Level 1 Level 2 Level 3 Descriptions Tray Setting Paper Type - Set the type of paper in the paper tray. Paper Size - Set the size of paper in the paper tray.
Level 1 Level 2 Level 3 Descriptions 2-sided Single Image - For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time. Auto Continue - - Select this setting if you want the machine to clear paper size errors, and to use the paper in the tray. Tray Command - - Select this setting if a tray mismatch appears when you use the HP drivers. Reset Printer - - Restore the printer settings to the factory settings.
Level 1 Level 2 Level 3 Level 4 Descriptions Wired LAN Wired Enable - - Turn the Wired LAN interface on or off manually. WLAN TCP/IP Boot Method - Select the Boot method that best suits your needs. IP Address - Enter the IP address. Subnet Mask - Enter the Subnet mask. Gateway - Enter the Gateway address. Node Name - Enter the Node name. (Up to 32 characters) WINS Config - Select the WINS configuration mode.
Level 1 Level 2 Level 3 Level 4 Descriptions Wi-Fi Direct Group Owner - - Set your machine as the Group Owner. Device Info. Device Name - View your machine's device name. SSID - View the Group Owner's SSID. When the machine is not connected, the LCD displays Not Connected. Status Info. IP Address - View your machine's current IP Address. Status - View the current Wi-Fi Direct network status. Signal - View the current Wi-Fi Direct network signal strength.
Level 1 Level 2 WLAN Wi-Fi Direct Level 3 Level 4 Descriptions WPS w/PIN Code - - Configure your wireless network settings using WPS with a PIN. WLAN Status Status - View the current wireless network status. Signal - View the current wireless network signal strength. Channel - View the current wireless network channel. Speed - View the current wireless network speed. SSID - View the current SSID. Comm. Mode - View the current Communication mode.
[Machine Info.] Level 1 Level 2 Descriptions Serial No. - Check your machine's serial number. Version - Check your machine's firmware version. Page Counter Total Check the total number of pages the machine has printed during its life. Copy Print Other Parts Life Toner View the approximate remaining toner life. Drum You can check the percentage of Drum life that remains available.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (2.7" Touch Panel MFC models) Settings Tables (2.7" Touch Panel MFC models) Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL ([Settings]) Level 1 Level 2 Descriptions Toner Toner Life View the approximate remaining toner life. Test Print Print a test page. Network Wired LAN Access the Wired LAN setting menus. WLAN Access the WLAN setting menus.
Level 1 Level 2 Descriptions Ecology Quiet Mode Decrease printing noise. Auto Power Off Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode. Choose Off if you do not want the machine to go into Power Off mode. Setting Lock Set Password Restrict unauthorized users from changing the machine’s settings. Lock Off⇒On Replace Toner - Set the machine to continue printing after the LCD displays Replace Toner.
Level 1 Level 2 Level 3 Descriptions Anti-Junk Fax Delete - Delete the number from the blocked list. Print Reports - You can print a list of registered fax numbers in the blocked list. Transmission - Select the initial setup for the Transmission Verification Report. Journal Period Journal Period Set the interval for automatic printing of the Fax Journal. Report Setting If you select an option other than Off and Every 50 Faxes, you can set the time for the option.
[All Settings] > [Network] Level 1 Level 2 Level 3 Level 4 Descriptions Wired LAN TCP/IP BOOT Method - Select the Boot method that best suits your needs. IP Address - Enter the IP address. Subnet Mask - Enter the Subnet mask. Gateway - Enter the Gateway address. Node Name - Enter the Node name. (up to 32 characters) WINS Configuration - Select the WINS configuration mode. WINS Server Primary Specify the IP address of the primary WINS server.
Level 1 Level 2 Level 3 Level 4 WLAN TCP/IP DNS Server Secondary Specify the IP address of the secondary DNS server. APIPA - Set the machine to allocate the IP address from the link-local address range automatically. IPv6 - Turn the IPv6 protocol on or off. For more detailed information, go to your model's FAQs & Troubleshooting page on the Brother support website at support.brother.com. Setup Wizard - - Configure your wireless network settings manually.
Level 1 Level 2 Level 3 Level 4 Descriptions Proxy Settings Proxy Connection - Change the Web connection settings. Address - Port - User Name - Password - - - (Available only for certain models) Web Connect Settings Network Reset - Restore all network settings back to the factory settings. [All Settings] > [Print Reports] Level 1 Level 2 Transmission View on LCD Display a Transmission Verification Report of your last transmission.
Level 1 Level 2 Descriptions Page Counter Other Check the total number of pages the machine has printed. Parts Life Drum Check the percentage of the supplies' life that remains available. [All Settings] > [Initial Setup] Level 1 Level 2 Descriptions Date & Time Date Add the date and time on the screen and in the headings of the faxes you send. Time Station ID Clock Type Select the time format (12-hour or 24-hour).
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (2.7" Touch Panel DCP models) Settings Tables (2.7" Touch Panel DCP models) Related Models: HL-L2395DW ([Settings]) Level 1 Level 2 Descriptions Toner Toner Life View the approximate remaining toner life. Test Print Print a test page. Network Wired LAN Access the Wired LAN setting menus. WLAN Access the WLAN setting menus.
Level 1 Level 2 Descriptions Ecology Auto Power Off Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode. Choose Off if you do not want the machine to go into Power Off mode. Replace Toner - Set the machine to continue printing after the LCD displays Replace Toner. [All Settings] > [Shortcut Settings] Level 1 Level 2 Descriptions (Select shortcut button.) Rename Change the shortcut name. Edit Change the shortcut settings.
Level 1 Level 2 Level 3 Level 4 Descriptions Wired LAN TCP/IP APIPA - Set the machine to allocate the IP address from the link-local address range automatically. IPv6 - Turn the IPv6 protocol on or off. For more detailed information, go to your model's FAQs & Troubleshooting page on the Brother support website at support.brother.com. Ethernet - - Select the Ethernet link mode. Wired Status - - View the current wired status. MAC Address - - View the machine's MAC address.
Level 1 Level 2 Level 3 Level 4 Descriptions WLAN WLAN Status SSID - View the current SSID. Comm. Mode - View the current Communication mode. MAC Address - - View the machine's MAC address. Set to Default - - Restore the wireless network settings to the factory settings. WLAN Enable - - Turn the WLAN on or off manually. Push Button - - Configure your Wi-Fi Direct network settings using the one-button push method.
Level 1 Descriptions WLAN Report Print the wireless LAN connection results. [All Settings] > [Machine Info.] Level 1 Level 2 Descriptions Serial No. - Check your machine's serial number. Firmware Version Main Version Check your machine's firmware version. Sub1 Version Firmware Update - Update your machine to the latest firmware. Firmware Auto Check - View firmware information on the Home screen. Page Counter Check the total number of pages the machine has printed.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Features Tables (2.7" Touch Panel MFC models) Features Tables (2.7" Touch Panel MFC models) Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL [Fax] Level 1 Level 2 Level 3 Level 4 Descriptions Redial(Pause) - - - Redial the last number called. When you are entering a fax or telephone number on the touchpanel, Redial changes to Pause on the LCD.
Level 1 Level 2 Level 3 Level 4 Descriptions Options Delayed Fax Delayed Fax - Set Time - Set the time of day the delayed faxes will be sent. - - Send a fax without using the memory. Coverpage Setup Coverpage Setup - Coverpage Message - Set the machine to automatically send a cover page that you have preprogrammed. Total Pages - Overseas Mode - - Set to On if you have difficulty sending faxes overseas.
Level 1 Level 2 Level 3 Descriptions Options Stack/Sort - Select to stack or sort multiple copies. Page Layout - Make N in 1 copies. - - Save the current settings as a shortcut. Save as Shortcut [Scan] Level 1 Level 2 Level 3 Level 4 Descriptions to PC to File (Select PC) Options Scan documents and save them to a folder on your computer. Save as Shortcut Start to OCR (Select PC) Options Save as Shortcut Convert your scanned document to an editable text file.
Level 1 Level 2 Level 3 Descriptions Active only when the machine has secure print data. [Web] Level 1 Level 2 Descriptions Web OneNote Connect the Brother machine to an Internet service. OneDrive Web services may have been added and service names may have been changed by the provider since this document was published. Dropbox Google Drive™ Evernote® Box [Apps] Level 1 Descriptions Apps Connect the Brother machine to the Brother Apps service.
Level 1 Level 2 Level 3 Level 4 Descriptions Not Registered Fax Glass Scan Size - Adjust the scan area of the scanner glass to the size of the document. Broadcasting Add Number Send the same fax message to more than one fax number. Real Time TX - Send a fax without using the memory. Coverpage Setup Coverpage Setup Set the machine to automatically send a cover page that you have pre-programmed.
(Wi-Fi Setup) After the Wi-Fi® is set up, you cannot change the settings from your Home screen. Change the settings for Wi-Fi in the Settings screen. Level 1 (Wi-Fi Setup) Level 2 Descriptions Setup Wizard Configure your wireless network settings manually. WLAN Assistant Configure your wireless network settings using the Brother installation disc. WPS Configure your wireless network settings using the one-button push method.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Features Tables (2.7" Touch Panel DCP models) Features Tables (2.7" Touch Panel DCP models) Related Models: HL-L2395DW [Copy] Level 1 Level 2 Level 3 Descriptions Start - - Make a black and white or grayscale copy. Options Enlarge/Reduce 100% - Enlarge Select an enlargement ratio for the next copy. Reduce Select a reduction ratio for the next copy.
Level 1 Level 2 Level 3 Level 4 Descriptions to Web - - - Upload the scanned data to an Internet service. - - Scan data using the Web Service protocol. Scan for Email - - Scan for Fax - - Scan for Print - - WS Scan Scan [Secure Print](Available only for certain models) Level 1 Level 2 Secure Print (Select User) (Select Secure Print Job) Level 3 Descriptions You can print data saved in the machine's memory when you enter your four-digit password.
Level 1 Level 2 Level 3 Level 4 Descriptions Not Registered Copy Density Change the settings in the 2 in 1 ID Copy option. 2 in 1 ID Copy Quality Contrast 2in1/1in1 Scan Web to File - Scan documents and save them to a folder on your computer. to OCR - Convert your scanned document to an editable text file. to Image - Scan photos or graphics into your graphics applications. to E-mail - Send a scanned document as an email attachment.
Home > Machine Settings > Change Machine Settings from Your Computer Change Machine Settings from Your Computer • Change Machine Settings Using Web Based Management • Change the Machine Settings Using Remote Setup • Where Can I Find My Brother Machine's Network Settings? • Network Management Software and Utilities 611
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management Change Machine Settings Using Web Based Management Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS).
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > What is Web Based Management? What is Web Based Management? Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). Type your machine's IP address into your web browser to access and change your print server settings.
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > Access Web Based Management Access Web Based Management • We recommend using the HTTPS security protocol when configuring settings using Web Based Management. • When you use HTTPS for Web Based Management configuration, your browser will display a warning dialog box. 1. Start your web browser. 2.
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > Set a Login Password for Web Based Management Set a Login Password for Web Based Management We recommend setting a login password to prevent unauthorized access to Web Based Management. 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > Set Up Your Machine's Address Book Using Web Based Management Set Up Your Machine's Address Book Using Web Based Management • We recommend using the HTTPS security protocol when configuring settings using Web Based Management. • When you use HTTPS for Web Based Management configuration, your browser will display a warning dialog box. 1. Start your web browser. 2.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup Change the Machine Settings Using Remote Setup Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL The Remote Setup program lets you configure many of your Brother machine's settings from your computer. When you start Remote Setup, the settings on your Brother machine will be downloaded to your computer and displayed on your screen.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Windows) Remote Setup (Windows) • Set Up the Brother Machine from Your Computer (Windows) • Set Up the Brother Machine Using ControlCenter4 (Windows) • Set Up Your Machine's Address Book Using ControlCenter4 (Windows) • Set Up Your Machine's Address Book Using Web Based Management 618
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Windows) > Set Up the Brother Machine from Your Computer (Windows) Set Up the Brother Machine from Your Computer (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If Secure Function Lock is set to On, you cannot use Remote Setup. 1.
Export Click to save the current configuration settings to a file. Click Export to save your address book or all settings for your machine. Import Click to import a file and read its settings. Print Click to print the selected items on the machine. You cannot print the data until it is uploaded to the machine. Click Apply to upload the new data to the machine, and then click Print. OK Click to start uploading data to the machine, and then exit the Remote Setup Program.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Windows) > Set Up the Brother Machine Using ControlCenter4 (Windows) Set Up the Brother Machine Using ControlCenter4 (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL If Secure Function Lock is set to On, you cannot use Remote Setup. 1. Click the (ControlCenter4) icon in the task tray, and then click Open. 2.
OK Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, confirm that your data is correct, and then click OK. Cancel Click to exit the Remote Setup Program without uploading data to the machine. Apply Click to upload data to the machine without exiting the Remote Setup Program. 5. Click OK.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Windows) > Set Up Your Machine's Address Book Using ControlCenter4 (Windows) Set Up Your Machine's Address Book Using ControlCenter4 (Windows) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use Remote Setup through CC4 to add or change Address Book numbers on your computer.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Mac) Remote Setup (Mac) • Set Up the Brother Machine with a USB Cable Connection (Mac) • Set Up Your Machine's Address Book with a USB Cable Connection (Mac) • Set Up Your Machine's Address Book Using Web Based Management 624
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Mac) > Set Up the Brother Machine with a USB Cable Connection (Mac) Set Up the Brother Machine with a USB Cable Connection (Mac) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use Remote Setup to set up your Brother machine with a USB cable connection.
Print Click to print the selected items on the machine. You cannot print the data until it is uploaded to the machine. Click Apply to upload the new data to the machine, and then click Print. OK Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, enter the correct data again, and then click OK. Cancel Click to exit the Remote Setup Program without uploading data to the machine.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Mac) > Set Up Your Machine's Address Book with a USB Cable Connection (Mac) Set Up Your Machine's Address Book with a USB Cable Connection (Mac) Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/ MFC-L2750DW/MFC-L2750DWXL Use Remote Setup to add or change Address Book numbers on your computer with a USB cable connection.
Home > Appendix Appendix • Specifications • How to Enter Text on Your Brother Machine • Supplies • Brother Numbers 628
Home > Appendix > Specifications Specifications >> General Specifications >> Document Size Specification >> Print Media Specifications >> Fax Specifications >> Copy Specification >> Scanner Specifications >> Printer Specifications >> Interface Specifications >> Supported Protocols and Security Features >> Computer Requirements Specifications General Specifications Printer Type • Laser Print Method • Electrophotographic Laser Printer • (HL-L2390DW/MFC-L2690DW/MFC-L2690DWXL/ MFC-L2710DW/MFC-L2717DW)
Power Consumption Approximately 4.6 W • (Average) (HL-L2395DW/MFC-L2730DW/MFC-L2750DW/ MFC-L2750DWXL) Approximately 5.1 W • Deep Sleep 2 (HL-L2390DW/DCP-L2550DW/MFC-L2690DW/ MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW) Approximately 0.8 W • (HL-L2395DW/MFC-L2730DW/MFC-L2750DW/ MFC-L2750DWXL) Approximately 1.2 W • Power Off 2 3 4 Approximately 0.02 W Dimensions Unit: in. (mm) (Typical outline view) • (HL-L2390DW/HL-L2395DW) * : 16.1 (410) (HL-L2390DW/HL-L2395DW) ** : 10.7 (272) *** : 15.7 (398.
Noise Level Sound Pressure Printing • (HL-L2390DW/MFC-L2690DW/MFC-L2690DWXL/ MFC-L2710DW) LpAm = 48 dB (A) • (DCP-L2550DW/HL-L2395DW/MFC-L2717DW/ MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL) LpAm = 49 dB (A) Printing • LpAm = 44 dB (A) Ready • LpAm = 30 dB (A) Printing • (HL-L2390DW/MFC-L2690DW/MFC-L2690DWXL/ MFC-L2710DW) (Quiet Mode) Sound Power LWAd = 6.48 B (A) • (DCP-L2550DW/HL-L2395DW/MFC-L2717DW/ MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL) LWAd = 6.59 B (A) Printing • LWAd = 6.
Paper Input Paper Tray Paper Weight • 16 to 43 lb (60 to 163 g/m2) (Standard) Maximum Paper Capacity • Up to 250 sheets of 20 lb (80 g/m2) Plain Paper Manual Feed Slot Paper Type • Plain Paper, Thin Paper, Thick Paper, Thicker Paper, Recycled Paper, Bond, Label, Envelope, Env. Thin, Env.Thick Paper Size • Width: 3 to 8.5 in. (76.2 to 215.9 mm) • Length: 5 to 14 in. (127 to 355.
Address Book • (MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/ MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL) 200 Locations One Touch Dial • (MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW) 8 (4 x 2) locations Groups • Up to 20 Broadcasting • (MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW) 258 Locations • (MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL) 250 Locations Automatic Redial • 1 time at 5 minutes intervals Memory Transmission • (MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW) Up to
Resolution 2 Scanning Width • 8 bit color Processing (Output) • Up to 19200 x 19200 dpi (interpolated) • Up to 1200 x 1200 dpi (from Scanner Glass) • Up to 600 x 600 dpi (from ADF) 1 • Maximum 8.27 in. (210 mm) Automatic 2-sided Scanning • (MFC-L2750DW/MFC-L2750DWXL) Yes (from ADF) 1 ADF models only 2 Maximum 1200 × 1200 dpi scanning with the WIA driver in Windows 7, Windows 8, Windows 8.
Wireless LAN • IEEE 802.11b/g/n (Infrastructure Mode) IEEE 802.11g/n (Wi-Fi Direct®) NFC • (HL-L2395DW/MFC-L2750DW/MFC-L2750DWXL) Yes 1 Your machine has a USB 2.0 Hi-Speed interface. The machine can also be connected to a computer that has a USB 1.1 interface. 2 Third party USB ports are not supported. 3 Use a straight-through Category 5 (or greater) twisted-pair cable. Supported Protocols and Security Features Ethernet 10Base-T/100Base-TX Wireless LAN IEEE 802.
10 Education / 10 Enterprise 2 3 Windows Server 2008 N/A Printing Windows Server 2008 R2 50 MB N/A 80 MB 400 MB 64 bit (x64) processor Windows Server 2012 Windows Server 2012 R2 Windows Server 2016 Mac macOS v10.10.5 Operating macOS v10.11.x System macOS v10.12.x Printing PC-Fax (Send) 4 Intel® Processor Scanning 1 Third party USB ports are not supported. 2 For WIA, 1200x1200 resolution. Brother Scanner Utility enables resolutions up to 19200 x 19200 dpi.
Home > Appendix > How to Enter Text on Your Brother Machine How to Enter Text on Your Brother Machine >> HL-L2390DW/DCP-L2550DW >> MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW >> HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL HL-L2390DW/DCP-L2550DW When text is required, enter characters on the machine. The characters that are available may differ depending on the operation you perform.
• Press button One time Two times Three times Four times Five times Six times Seven times Eight times Nine times 2 A B C А Б В Г 2 A 3 D E F Д Е Ё Ж 3 D 4 G H I З И Й К 4 G 5 J K L Л М Н О 5 J 6 M N O П Р С Т 6 M 7 P Q R S У Ф Х Ц 7 8 T U V Ч Ш Щ Ъ Ы 8 9 W X Y Z Ь Э Ю Я 9 Inserting spaces To enter a space in a fax number, press c once between numbers. To enter a space in a name, press c twice between characters.
Making corrections • If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect character and press . Enter the correct character. • To insert a character, press d or c to move the cursor to the correct place, and then enter the character. • Press for each character you want to erase, or press and hold to erase all the characters.
Home > Appendix > Supplies Supplies When the time comes to replace supplies, such as the toner or drum, an error message will appear on your machine's control panel or in the Status Monitor. For more information about the supplies for your machine, visit www.brother.com/original/index.html or contact your local Brother dealer. • The Supply Order Number (No.) will vary depending on your country and region. Toner Cartridge Standard Toner: Supply Order No.
The average total toner yield (pre-installed + Super High Yield Toner replacement included in the carton) is estimated at approximately 7,500 pages (3,000 pages + 4,500 pages) (A4 or Letter size single-sided pages). Drum Unit Drum Unit: Supply Order No.
Home > Appendix > Brother Numbers Brother Numbers IMPORTANT For technical help, you must call the country where you bought the machine. Calls must be made from within that country. >> FAQs (Frequently Asked Questions) >> For Customer Service >> Ordering Accessories and Supplies FAQs (Frequently Asked Questions) The Brother Solutions Center is our one-stop resource for all your machine needs.
PayPal account, you can order directly from Brother. Visit us online for a complete selection of the Brother accessories and supplies that are available for purchase. NOTE In Canada, only Visa and MasterCard are accepted. In USA: 1-877-552-MALL (1-877-552-6255) 1-800-947-1445 (assistance via fax) www.brothermall.com In Canada: www.brother.
Brother International Corporation 200 Crossing Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Brother International Corporation (Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, Canada H9B 3H6 Visit us on the World Wide Web www.brother.com These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will support only machines purchased in their own countries.
