Online User's Guide HL-L3290CDW DCP-L3551CDW MFC-L3710CW MFC-L3750CDW MFC-L3770CDW © 2018 Brother Industries, Ltd. All rights reserved.
Home > Table of Contents Table of Contents Before You Use Your Brother Machine ............................................................................................... 1 Definitions of Notes ........................................................................................................................................ 2 Notice - Disclaimer of Warranties (USA and Canada) ................................................................................... 3 Trademarks ..........................
Home > Table of Contents Cancel a Print Job........................................................................................................................................ 82 Test Print ...................................................................................................................................................... 83 Scan......................................................................................................................................................
Home > Table of Contents Cancel a Fax in Progress ................................................................................................................. 208 Check and Cancel a Pending Fax.................................................................................................... 209 Fax Options ...................................................................................................................................... 210 Receive a Fax ............................................
Home > Table of Contents Synchronize Time with the SNTP Server Using Web Based Management ..................................... 345 Technical Information for Advanced Users................................................................................................. 348 Reset the Network Settings to the Factory Settings......................................................................... 349 Security ....................................................................................................
Home > Table of Contents Brother iPrint&Scan Overview.................................................................................................................... 466 Troubleshooting ................................................................................................................................ 467 Error and Maintenance Messages ............................................................................................................. 468 Transfer Your Faxes or Fax Journal Report .
Home > Table of Contents Clean the Paper Pick-up Rollers ...................................................................................................... 574 Calibrate Color Output ............................................................................................................................... 575 Reset the Machine's Calibration Settings......................................................................................... 576 Correct Color Print Alignment (Color Registration) ........
Home > Before You Use Your Brother Machine Before You Use Your Brother Machine • Definitions of Notes • Notice - Disclaimer of Warranties (USA and Canada) • Trademarks • Important Note 1
Home > Before You Use Your Brother Machine > Definitions of Notes Definitions of Notes We use the following symbols and conventions throughout this User's Guide: WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
Home > Before You Use Your Brother Machine > Notice - Disclaimer of Warranties (USA and Canada) Notice - Disclaimer of Warranties (USA and Canada) BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER’S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE.
Home > Before You Use Your Brother Machine > Trademarks Trademarks Microsoft, Windows, Windows Server, SharePoint, Internet Explorer, PowerPoint, Excel and OneNote are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, App Store, Mac, macOS, Safari, AirPrint, the AirPrint logo, iPad, iPhone and iPod touch are trademarks of Apple Inc., registered in the United States and other countries.
Home > Before You Use Your Brother Machine > Important Note Important Note • Do not use this product outside the country of purchase as it may violate the wireless telecommunication and power regulations of that country. • Not all models are available in all countries. • Windows 10 in this document represents Windows 10 Home, Windows 10 Pro, Windows 10 Education and Windows 10 Enterprise. • Windows Server 2008 in this document represents Windows Server 2008 and Windows Server 2008 R2.
Home > Introduction to Your Brother Machine Introduction to Your Brother Machine • Before Using Your Machine • Control Panel Overview • Touchscreen LCD Overview • How to Navigate the Touchscreen LCD • Settings Screen Overview • Set the Main Home Screen • Access Brother Utilities (Windows) 6
Home > Introduction to Your Brother Machine > Before Using Your Machine Before Using Your Machine Before attempting any printing operation, confirm the following: • Make sure you have installed the Brother software and drivers. • For USB or network cable users: Make sure the interface cable is physically secure. Simultaneous printing, scanning and faxing Your machine can print from your computer while sending or receiving a fax into memory or while scanning a document into the computer.
Home > Introduction to Your Brother Machine > Control Panel Overview Control Panel Overview The control panel may vary depending on your model. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1 1. 2 3 4 5 6 Power On/Off . • Turn on the machine by pressing • Turn off the machine by pressing and holding . The LCD displays [Shutting Down] and stays on for a few seconds before turning off. 2.
3. Liquid Crystal Display (LCD) Displays messages to help you set up and use the machine. If the machine is in Ready Mode or Copy Mode, the LCD displays: a b Stack Copies:01 100% □□■□□ Auto e d c a. Type of copy b. Number of copies c. Quality d. Contrast e. Copy ratio 4. Menu Buttons Menu Press to access the Menu for programming your machine settings. Clear • Press to delete entered data. • Press to cancel the current setting. OK Press to store your machine settings.
MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1 2 3 4 5 1. Touchscreen Liquid Crystal Display (LCD) Access menus and options by pressing them on the touchscreen. 2. Menu Buttons (Back) Press to go back to the previous menu. (Home) Press to return to the Main Home screen. (Cancel) Press to cancel an operation. 3. Dial Pad (Numerical buttons) Press the Numerical buttons to dial telephone or fax numbers, and to enter the number of copies. 4.
Related Information • Introduction to Your Brother Machine 11
Home > Introduction to Your Brother Machine > Touchscreen LCD Overview Touchscreen LCD Overview Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can select from two types of screens to set as the Main Home screen: Home screens and Shortcuts screens. When a Home screen is displayed, swipe left or right or press d or c to display the other Home screens. The Main Home screen displays the machine's status when the machine is idle.
Home screen: Screen 3 Shortcuts screen Create Shortcuts for frequently-used operations, such as sending a fax, copying, scanning, and using Web Connect. Three Shortcuts tabs are available with six Shortcuts on each Shortcuts tab. A total of 18 Shortcuts are available. 1. Date & Time Displays the date and time set on the machine. 2. Modes • [Fax] Press to access Fax mode. • [Copy] Press to access Copy mode. • [Scan] Press to access Scan mode.
• [Web] Press to connect the Brother machine to an Internet service. • [Apps] Press to connect the Brother machine to the Brother Apps service. • [USB] Press to access the USB menu and select [Scan to USB] or [Direct Print] options. (Toner) 3. Displays the remaining toner life. Press to access the [Toner] menu. 4. (Settings) Press to access the [Settings] menu. If Setting Lock has been turned on, a lock icon appears on the LCD. You must unlock the machine to change settings. or 5.
Warning icon The warning icon view it, and then press appears when there is an error or maintenance message. Press the message area to to return to the Main Home screen. NOTE This product adopts the font of ARPHIC TECHNOLOGY CO.,LTD.
Home > Introduction to Your Brother Machine > How to Navigate the Touchscreen LCD How to Navigate the Touchscreen LCD Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Press your finger on the LCD to operate it. To display and access all the options, swipe left, right, up, down or press d c or a b on the LCD to scroll through them. The following steps explain how to change a machine setting. In this example, the LCD Backlight setting is changed from [Light] to [Med].
5. Press [Backlight]. 6. Press [Med]. 7. Press .
Home > Introduction to Your Brother Machine > Settings Screen Overview Settings Screen Overview Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Press to view the current machine status on the LCD. Use the Settings menu to access all of your Brother machine's settings. The available features vary depending on your model. 1. Toner • Displays the remaining toner life. • Press to access the [Toner] menu. 2. Network • Press to set up a network connection.
Home > Introduction to Your Brother Machine > Set the Main Home Screen Set the Main Home Screen Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can change the LCD to display a specific Home screen or Shortcut screen. When the machine is idle or you press 1. Press , the touchscreen will return to the screen you set. [Settings] > [Screen Settings] > [Main Home Screen]. 2. Swipe up or down or press a or b to display the screen settings, and then press the setting you want. 3. Press .
Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows) Access Brother Utilities (Windows) Brother Utilities is an application launcher that offers convenient access to all Brother applications installed on your computer. 1. Do one of the following: • (Windows 7) Click • (Start) > All Programs > Brother > Brother Utilities. (Windows 8) Tap or click • (Brother Utilities) either on the Start screen or the desktop. (Windows 8.
Related Information • Introduction to Your Brother Machine • Uninstall the Brother Software and Drivers (Windows) 21
Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows) > Uninstall the Brother Software and Drivers (Windows) Uninstall the Brother Software and Drivers (Windows) 1. Do one of the following: • (Windows 7) Click • (Start) > All Programs > Brother > Brother Utilities. (Windows 8) Tap or click • (Brother Utilities) either on the Start screen or the desktop. (Windows 8.
Home > Paper Handling Paper Handling • Load Paper • Paper Settings • Recommended Print Media • Load Documents • Unscannable and Unprintable Areas • Using Special Paper 23
Home > Paper Handling > Load Paper Load Paper • Load and Print Using the Paper Tray • Load and Print Using the Multi‑purpose Tray (MP Tray) • Load and Print Paper in the Manual Feed Slot 24
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray Load and Print Using the Paper Tray • Load Paper in the Paper Tray • Printing Problems • Error and Maintenance Messages 25
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load Paper in the Paper Tray Load Paper in the Paper Tray • If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper size and paper type. Change the paper size and paper type settings if needed, following the LCD instructions.
6. Slowly push the paper tray completely into the machine. 7. Lift the support flap to prevent paper from sliding off the output tray.
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load Paper in the Paper Tray > Change Machine Settings to Print on Preprinted Paper in the Paper Tray Change Machine Settings to Print on Preprinted Paper in the Paper Tray Related Models: HL-L3290CDW/DCP-L3551CDW/MFC-L3750CDW/MFC-L3770CDW When you use preprinted paper for 2-sided printing, change the machine's settings. DO NOT load different sizes and types of paper in the paper tray at the same time.
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) Load and Print Using the Multi‑purpose Tray (MP Tray) You can load thin paper, thick paper, recycled paper, bond paper, glossy paper, labels, up to 30 sheets of plain paper, or up to three envelopes in the MP tray.
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load Paper in the Multi‑purpose Tray (MP Tray) Load Paper in the Multi‑purpose Tray (MP Tray) Related Models: MFC-L3770CDW When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper Type settings in the machine, or on your computer. • Plain Paper • Thin Paper • Thick Paper • Recycled Paper • Bond Paper • Glossy Paper 1.
5. Load paper with the printing surface face up in the MP tray. 1 • Make sure the paper is below the maximum paper mark (1). • When using glossy paper, load only one sheet at a time in the MP tray to avoid a paper jam. • When you use preprinted paper, load the paper in the correct orientation. See Related Information: Change Machine Settings to Print on Preprinted Paper in the MP Tray.
• Change Machine Settings to Print on Preprinted Paper in the MP Tray 32
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load Paper in the Multi‑purpose Tray (MP Tray) > Change Machine Settings to Print on Preprinted Paper in the MP Tray Change Machine Settings to Print on Preprinted Paper in the MP Tray Related Models: MFC-L3770CDW When you use preprinted paper for 2-sided printing, change the machine's settings. DO NOT load different sizes and types of paper in the paper tray at the same time.
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load and Print Labels Using the MP Tray Load and Print Labels Using the MP Tray Related Models: MFC-L3770CDW When the back cover (face up output tray) is pulled down, the machine has a straight paper path from the MP tray through to the back of the machine. Use this paper feed and output method when you print on labels.
1 Make sure the paper is below the maximum paper mark (1). 6. Change your print preferences in the Print screen before sending the print job from your computer. 7. Send your print job to the machine. 8. Close the back cover (the face up output tray) until it locks in the closed position.
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load and Print Envelopes Using the MP Tray Load and Print Envelopes Using the MP Tray Related Models: MFC-L3770CDW You can load up to three envelopes in the MP tray. Before loading, press the corners and sides of the envelopes to make them as flat as possible.
2 1 5. Slide the MP tray paper guides to fit the width of the envelopes that you are using. 6. Load paper with the printing surface face up in the MP tray. 1 Load up to three envelopes in the MP tray with the printing surface face up. Make sure the envelopes are below the maximum paper mark (1). Loading more than three envelopes may cause paper jams. 7. Change your print preferences in the Print dialog box before sending the print job from your computer.
Related Information • Load and Print Using the Multi‑purpose Tray (MP Tray) 38
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot Load and Print Paper in the Manual Feed Slot • Load and Print Paper in the Manual Feed Slot • Load and Print on Labels in the Manual Feed Slot • Load and Print on Envelopes in the Manual Feed Slot 39
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot > Load and Print Paper in the Manual Feed Slot Load and Print Paper in the Manual Feed Slot Related Models: HL-L3290CDW/DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on your computer at the same time. • Plain Paper • Thin Paper • Thick Paper • Recycled Paper • Bond Paper • Glossy Paper 1.
• Load paper into the manual feed slot with the printing surface facing up. • Make sure the paper is straight and in the correct position in the manual feed slot. If it is not, the paper may not be fed correctly, resulting in a skewed printout or a paper jam. • To remove a small printout from the output tray, use both hands to lift up the scanner cover. • You can still use the machine while the scanner cover is up. To close the scanner cover, gently push it down with both hands. 5.
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot > Load and Print on Labels in the Manual Feed Slot Load and Print on Labels in the Manual Feed Slot Related Models: HL-L3290CDW/DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on your computer at the same time. 1. Open the machine's back cover (the face up output tray).
• Load paper into the manual feed slot with the printing surface facing up. • Pull the paper out completely if you must reload the paper into the manual feed slot. • Do not put more than one sheet of paper in the manual feed slot at one time, as it may cause a jam. • Make sure the paper is straight and in the correct position in the manual feed slot. If it is not, the paper may not be fed correctly, resulting in a skewed printout or a paper jam. 5. Send your print job to the machine.
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot > Load and Print on Envelopes in the Manual Feed Slot Load and Print on Envelopes in the Manual Feed Slot Related Models: HL-L3290CDW/DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on your computer at the same time. 1. Open the machine's back cover (the face up output tray).
5. Using both hands, put one envelope in the manual feed slot until the front edge touches the paper feed roller. When you feel the machine pull it in, let go. • Load the envelope into the manual feed slot with the printing surface facing up. • Pull the envelope out completely when you reload the envelope into the manual feed slot. • Do not put more than one envelope in the manual feed slot at one time, as it may cause a jam.
Home > Paper Handling > Paper Settings Paper Settings • Change the Paper Size and Paper Type • Select the Tray to Be Used For Printing • Change the Check Paper Size Setting 46
Home > Paper Handling > Paper Settings > Change the Paper Size and Paper Type Change the Paper Size and Paper Type When you change the size and type of the paper you load in the tray, you must change the Paper Size and Paper Type settings on the LCD at the same time. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [General Setup] option, and then press OK. 3.
Home > Paper Handling > Paper Settings > Select the Tray to Be Used For Printing Select the Tray to Be Used For Printing Related Models: MFC-L3770CDW Change the default tray the machine will use for printing copies, received faxes, and print jobs from your computer. DCP models do not support the fax feature. 1. Press [Settings] > [All Settings] > [General Setup] > [Tray Setting]. 2.
Home > Paper Handling > Paper Settings > Change the Check Paper Size Setting Change the Check Paper Size Setting When you turn on your machine's Check Size setting, the machine displays a message when you remove a paper tray or load paper using the MP tray, asking if you changed the paper size and paper type. The default setting is On. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2.
Home > Paper Handling > Recommended Print Media Recommended Print Media To get the best print quality, we recommend using the paper listed in the table.
Home > Paper Handling > Load Documents Load Documents You can send a fax, make copies and scan from the Automatic Document Feeder (ADF) and from the scanner glass.
Home > Paper Handling > Load Documents > Load Documents in the Automatic Document Feeder (ADF) Load Documents in the Automatic Document Feeder (ADF) Related Models: DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use the ADF when copying or scanning multiple-page, standard-sized documents. • The ADF can hold up to 50 pages and feed each sheet individually. • Use standard 20 lb (80 g/m2) paper. • Make sure documents with correction fluid or written in ink are completely dry.
Related Information • Load Documents 53
Home > Paper Handling > Load Documents > Load Documents on the Scanner Glass Load Documents on the Scanner Glass Use the scanner glass to fax, copy, or scan one page at a time. Document Sizes Supported Length: Up to 11.8 in. (300 mm) Width: Up to 8.5 in. (215.9 mm) Weight: Up to 4.4 lb (2 kg) To use the scanner glass, the ADF must be empty. 1. Lift the document cover. 2. Place the document on the scanner glass face down. 3. Place the corner of the page in the upper left corner of the scanner glass.
Home > Paper Handling > Unscannable and Unprintable Areas Unscannable and Unprintable Areas The measurements in the table below show maximum unscannable and unprintable areas from the edges of the most commonly-used paper sizes. These measurements may vary depending on the paper size or settings in the application you are using. 1 2 4 3 Do not attempt to scan, copy, or print into these areas; your output will not reflect anything in these areas.
Home > Paper Handling > Using Special Paper Using Special Paper Always test paper samples before purchasing them to ensure desirable performance. • DO NOT use inkjet paper; it may cause a paper jam or damage your machine. • If you use bond paper, paper with a rough surface, or paper that is wrinkled or creased, the paper may exhibit degraded performance. Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.
Home > Print Print • Print from Your Computer (Windows) • Print from Your Computer (Mac) • Cancel a Print Job • Test Print 57
Home > Print > Print from Your Computer (Windows) Print from Your Computer (Windows) • Print a Document (Windows) • Print Settings (Windows) • Secure Print (Windows) • Change the Default Print Settings (Windows) • Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows) • Monitor the Status of the Machine from Your Computer (Windows) 58
Home > Print > Print from Your Computer (Windows) > Print a Document (Windows) Print a Document (Windows) 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears. 3. Make sure you have loaded the correct size paper in the paper tray. 4. Click the Paper Size drop-down list, and then select your paper size. 5.
Related Information • Print from Your Computer (Windows) Related Topics: • Print Settings (Windows) 60
Home > Print > Print from Your Computer (Windows) > Print Settings (Windows) Print Settings (Windows) Basic Tab 1. Paper Size Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size. 2. Orientation Select the orientation (portrait or landscape) of your printout. If your application contains a similar setting, we recommend that you set the orientation using the application. 3.
5. Print Quality Select the print resolution you want. Because print quality and speed are related, the higher the quality, the longer it will take to print the document. 6. Color / Mono Select the Color/Mono settings to use. NOTE • The machine’s color sensor is very sensitive and may perceive faded black text or an off-white background as color. If you know that your document is black and white and you want to conserve color toner, select Mono mode.
2-sided Settings button Click this button to select the type of 2-sided binding. Four types of 2-sided bindings are available for each orientation. 10. Paper Source Select the paper source setting according to your print conditions or purpose. First Page Select the paper source to use for printing the first page. Other Pages Select the paper source to use for printing the second and subsequent pages. Advanced Tab 1. Scaling Select these options to enlarge or reduce the size of the pages in your document.
2. Reverse Print Select this option to rotate the printed image 180 degrees. 3. Use Watermark Select this option to print a logo or text on your document as a watermark. Select one of the preset watermarks, add a new watermark, or use an image file you have created. 4. Header-Footer Print Select this option to print the date, time and PC login user name on the document. 5.
Home > Print > Print from Your Computer (Windows) > Secure Print (Windows) Secure Print (Windows) Use Secure Print to ensure that confidential or sensitive documents do not print until you enter a password on the machine's control panel. • The secure data is deleted from the machine when you turn off the machine. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Select the print command in your application. 2.
You must set a separate password for each document. 7. Type the User Name and Job Name in the text field, if needed. 8. Click OK, to close the Secure Print Settings window. 9. Click OK. 10. Complete your print operation. 11. On the machine's control panel, swipe left or right or press d or c to display the [Secure Print] option, and then press [Secure Print]. 12. Swipe up or down or press a or b to display user names, and then press your user name. The LCD displays the list of secured jobs for your name.
Home > Print > Print from Your Computer (Windows) > Change the Default Print Settings (Windows) Change the Default Print Settings (Windows) When you change an application's print settings, the changes only apply to documents printed with that application. To change print settings for all Windows applications, you must configure the printer driver properties. 1. Do one of the following: • For Windows Server 2008 Click • (Start) > Control Panel > Hardware and Sound > Printers.
Home > Print > Print from Your Computer (Windows) > Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows) Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows) The BR-Script3 printer driver lets you print PostScript® data more clearly. To install the PS driver (BR-Script3 printer driver), launch the Brother installation disc, select Custom in the Select Machine section, and then select the PS Driver check box. 1.
Home > Print > Print from Your Computer (Windows) > Monitor the Status of the Machine from Your Computer (Windows) Monitor the Status of the Machine from Your Computer (Windows) The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices, allowing you to get immediate notification of errors. • Do one of the following: - Double-click the - (Windows 7) Click icon in the task tray. (Start) > All Programs > Brother > Brother Utilities.
Home > Print > Print from Your Computer (Mac) Print from Your Computer (Mac) • Print a Document (Mac) • Print Options (Mac) • Secure Print (Mac) • Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation) (Mac) • Monitor the Status of the Machine from Your Computer (Mac) 70
Home > Print > Print from Your Computer (Mac) > Print a Document (Mac) Print a Document (Mac) 1. Make sure you have loaded the correct size paper in the paper tray. 2. From an application, such as Apple TextEdit, click the File menu, and then select Print. 3. Select Brother XXX-XXXX (where XXXX is your model name). 4. Type the number of copies you want in the Copies field. 5. Click the Paper Size pop-up menu, and then select your paper size. 6.
Home > Print > Print from Your Computer (Mac) > Print Options (Mac) Print Options (Mac) Page Setup 1. Paper Size Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size. 2. Orientation Select the orientation (portrait or landscape) of your printout. If your application contains a similar setting, we recommend that you set the orientation using the application. 3.
Layout 1. Pages per Sheet Select the number of pages to print on a single sheet of paper. 2. Layout Direction Select the page order when printing multiple pages on a single sheet of paper. 3. Border Select the type of border to use when printing multiple pages on a single sheet of paper. 4. Two-Sided (Available only for certain models) Select whether to print on both sides of the paper. 5. Reverse page orientation Select this option to rotate the printed image 180 degrees. 6.
Paper Handling 1. Collate pages Select this option to print sets of multi-page documents in the original page order. When this option is selected, one complete copy of your document will print, and then reprint according to the number of copies you choose. If this option is not selected, then each page will print according to the number of copies chosen before the next page of the document is printed. 2. Pages to Print Select which pages you want to print (even pages or odd pages). 3.
Print Settings 1. Media Type Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts its print settings according to the selected media type. 2. Print Quality Select the print resolution you want. Because print quality and speed are related, the higher the quality, the longer it will take to print the document. 3. Color / Mono Select the Color/Mono settings to use.
Other Print Options Skip Blank Page Select this option to allow the printer driver to automatically detect blank pages and exclude them from printing. Color Settings 1. Color Mode Select the color mode to suit your preference. 2. Advanced Color Settings Click the disclosure triangle to select the Color Enhancement feature. This feature analyzes your image to improve its sharpness, white balance and color density.
Secure Print 1. Secure Print (Available only for certain models) This feature ensures that confidential or sensitive documents do not print until you enter a password on the machine's control panel.
Home > Print > Print from Your Computer (Mac) > Secure Print (Mac) Secure Print (Mac) Use Secure Print to ensure that confidential or sensitive documents do not print until you enter a password on the machine's control panel. • The secure data is deleted from the machine when you turn off the machine. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. From an application, such as Apple TextEdit, click the File menu, and then select Print. 2.
After you have printed the secured data, it will be cleared from the machine's memory.
Home > Print > Print from Your Computer (Mac) > Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation) (Mac) Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation) (Mac) The BR-Script3 printer driver lets you print PostScript® data more clearly. • Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download the PS driver (BR-Script3 printer driver).
Home > Print > Print from Your Computer (Mac) > Monitor the Status of the Machine from Your Computer (Mac) Monitor the Status of the Machine from Your Computer (Mac) The Status Monitor utility is a configurable software tool for monitoring the status of a device, allowing you to get immediate notification of error messages, such as paper empty or paper jam, at preset update intervals. You can also access Web Based Management. 1.
Home > Print > Cancel a Print Job Cancel a Print Job >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Stop/Exit. To cancel multiple print jobs, press and hold Stop/Exit for four seconds. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Press . To cancel multiple print jobs, press and hold for about four seconds.
Home > Print > Test Print Test Print If there are problems with print quality, follow these instructions to do a test print: >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [Printer] option, and then press OK. 3. (For Printer Emulation Supported models) Press a or b to display the [Print Options] option, and then press OK. 4. Press a or b to display the [Test Print] option, and then press OK. 5.
Home > Scan Scan • Scan Using the Scan Button on Your Brother Machine • Scan from Your Computer (Windows) • Scan from Your Computer (Mac) • Configure Scan Settings Using Web Based Management 84
Home > Scan > Scan Using the Scan Button on Your Brother Machine Scan Using the Scan Button on Your Brother Machine • Scan Photos and Graphics • Save Scanned Data to a Folder as a PDF File • Save Scanned Data to a USB Flash Drive • Scan to an Editable Text File (OCR) • Scan to Email Attachment • Scan to FTP • Scan to Network (Windows) • Scan to SharePoint • Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) • Change Scan Button Settings from ControlCenter4 (Windows) • Change Sc
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan Photos and Graphics Scan Photos and Graphics Send scanned photos or graphics directly to your computer. Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use either ControlCenter4 (Windows) or Brother iPrint&Scan (Mac) software. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Load your document. 2. Press (Scan). 3.
• [Remove Bkg Clr] (available only for the [Color] and [Gray] options.) 9. Press Black Start or Color Start. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Load your document. 2. Press [Scan] > [to PC] > [to Image] . 3. If the machine is connected over the network, select the computer name you want to send data.
• [Auto Deskew] • [Skip Blank Page] • [Remove Background Color] (available only for the [Color] and [Gray] options) • If your machine displays the [OK] button, press [OK]. • To save the settings as a shortcut, press [Save as Shortcut]. 7. Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the touchscreen instructions to complete the scanning job.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Save Scanned Data to a Folder as a PDF File Save Scanned Data to a Folder as a PDF File Scan documents and save them to a folder on your computer as PDF files. Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use either ControlCenter4 (Windows) or Brother iPrint&Scan (Mac) software. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1.
(available only for the [Color] and [Gray] options.) 9. Press Black Start or Color Start. The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Load your document. 2. Press [Scan] > [to PC] > [to File] . 3. If the machine is connected over the network, select the computer name you want to send data.
• [Skip Blank Page] • [Remove Background Color] (available only for the [Color] and [Gray] options) • If your machine displays the [OK] button, press [OK]. • To save the settings as a shortcut, press [Save as Shortcut]. 7. Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the touchscreen instructions to complete the scanning job.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Save Scanned Data to a USB Flash Drive Save Scanned Data to a USB Flash Drive Related Models: MFC-L3750CDW/MFC-L3770CDW Scan documents directly to a USB flash drive. 1. Load your document. 2. Insert a USB flash drive into your machine. The LCD automatically changes. 3. Press [Scan to USB]. 4. Do one of the following: • • To change the settings, press [Options], and then select the button you want to change.
• [File Size] • [Auto Deskew] • [Skip Blank Page] • [Skip Blank Page Sensitivity] • [Remove Background Color] (available only for the [Color] and [Gray] options) • If your machine displays the [OK] button, press [OK]. • To save the settings as a shortcut, press [Save as Shortcut]. 7. Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the touchscreen instructions to complete the scanning job. IMPORTANT The LCD displays a message while reading the data.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to an Editable Text File (OCR) Scan to an Editable Text File (OCR) Your machine can convert characters in a scanned document to text using optical character recognition (OCR) technology. You can edit this text using your preferred text-editing application. • The Scan to OCR feature is available for certain languages. • Use the Scan button on the machine to make temporary changes to the scan settings.
• [Remove Bkg Clr] (available only for the [Color] and [Gray] options.) 9. Press Black Start or Color Start. The machine scans the document, converts it to editable text, and then sends it to your default word processing application. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Load your document. 2. Press [Scan] > [to PC] > [to OCR] . 3. If the machine is connected over the network, select the computer name you want to send data.
• [Auto Deskew] • [Skip Blank Page] • [Remove Background Color] (available only for the [Color] and [Gray] options) • If your machine displays the [OK] button, press [OK]. • To save the settings as a shortcut, press [Save as Shortcut]. 7. Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the touchscreen instructions to complete the scanning job.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Email Attachment Scan to Email Attachment Send a scanned document as an email attachment. • Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use either ControlCenter4 (Windows) or Brother iPrint&Scan (Mac) software. • The Scan to Email feature does not support Webmail services.
• [File Type] • [Document Size] • [Auto Deskew] (available for certain models) • [Remove Bkg Clr] (available only for the [Color] and [Gray] options.) 9. Press Black Start or Color Start. The machine scans the document and saves it as a file attachment. It then launches your email application and opens a new, blank email message with the scanned file attached. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Load your document. 2. Press [Scan] > [to PC] > [to E-mail] . 3.
• [Brightness] • [Contrast] (available only for the [Color] and [Gray] options) • [Auto Deskew] • [Skip Blank Page] • [Remove Background Color] (available only for the [Color] and [Gray] options) • If your machine displays the [OK] button, press [OK]. • To save the settings as a shortcut, press [Save as Shortcut]. 7. Press [Start]. The machine starts scanning. If using the machine's scanner glass, follow the touchscreen instructions to complete the scanning job.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to FTP Scan to FTP Scan documents directly to an FTP server when you need to share the scanned information. For added convenience, configure different profiles to save your favorite Scan to FTP destinations.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to FTP > Set up a Scan to FTP Profile Set up a Scan to FTP Profile Set up a Scan to FTP Profile to scan and upload the scanned data directly to an FTP location. We recommend Microsoft Internet Explorer 11/Microsoft Edge for Windows and Safari 10/11 for Mac. Make sure that JavaScript and Cookies are always enabled in whichever browser you use. 1. Start your web browser.
5. Click the Scan to FTP/Network/SharePoint Profile menu in the left navigation bar. 6. Select the profile you want to set up or change. 7. In the Profile Name field, type a name for this server profile (up to 15 alphanumeric characters). The machine will display this name on the LCD. 8. In the Host Address field, type the Host Address (for example: ftp.example.com; up to 64 characters) or the IP address (for example: 192.23.56.189). 9. Change the Port Number setting used to access the FTP server.
13. Click the File Name drop-down list, and then select a file name prefix from the preset names provided, or from user-defined names. The file name used for the scanned document will be the file name prefix you select, followed by the last six digits of the flatbed/ADF scanner counter and the file extension (for example: "Estimate_098765.pdf"). 14. Click the Quality drop-down list, and then select a quality setting.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to FTP > Upload Scanned Data to an FTP Server Upload Scanned Data to an FTP Server Share scanned information by saving it to your FTP server. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Load your document. 2. Press (Scan). 3. Press a or b to select the [to FTP] option, and then press OK. 4. Press a or b to select one of the profiles listed, and then press OK.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Network (Windows) Scan to Network (Windows) Scan documents directly to a CIFS server on your local network. For added convenience, you can configure different profiles to save your favorite Scan to Network destinations.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Network (Windows) > Set up a Scan to Network Profile Set up a Scan to Network Profile Set up a Scan to Network Profile to scan and upload scanned data directly to a folder on a CIFS server. We recommend Microsoft Internet Explorer 11/Microsoft Edge for Windows and Safari 10/11 for Mac. Make sure that JavaScript and Cookies are always enabled in whichever browser you use. 1. Start your web browser.
5. Click the Scan to FTP/Network/SharePoint Profile menu in the left navigation bar. 6. Select the profile you want to set up or change. 7. In the Profile Name field, type a name for this server profile (up to 15 alphanumeric characters). The machine will display this name on the LCD. 8. In the Network Folder Path field, type the path to the folder on the CIFS server where you want to send your scanned data. 9.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Network (Windows) > Set up a Scan to Network Profile > Set the Date and Time Using Web Based Management Set the Date and Time Using Web Based Management Make sure the date and time and the time zone settings are set correctly using Web Based Management or the control panel, so the machine's time matches the time being used by the server providing authentication. Ignore step 1, if you already have a Web Based Management window open.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to Network (Windows) > Upload Scanned Data to a CIFS Server Upload Scanned Data to a CIFS Server >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Load your document. 2. Press (Scan). 3. Press a or b to select the [to Network] option, and then press OK. 4. Press a or b to select one of the profiles listed, and then press OK.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to SharePoint Scan to SharePoint Scan documents directly to a SharePoint server when you need to share the scanned information. For added convenience, configure different profiles to save your favorite Scan to SharePoint destinations.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to SharePoint > Set up a Scan to SharePoint Profile Set up a Scan to SharePoint Profile Set up a Scan to SharePoint Profile to scan and upload the scanned data directly to a SharePoint location. We recommend Microsoft Internet Explorer 11/Microsoft Edge for Windows and Safari 10/11 for Mac. Make sure that JavaScript and Cookies are always enabled in whichever browser you use. 1. Start your web browser.
5. Click the Scan to FTP/Network/SharePoint Profile menu in the left navigation bar. 6. Select the profile you want to set up or change. 7. In the Profile Name field, type a name for this server profile (up to 15 alphanumeric characters). The machine will display this name on the LCD. 8. In the SharePoint Site Address field, Copy and Paste the full destination address shown in the address bar of your browser (for example: http://SharePointSiteAddress/Shared%20Documents/Forms/AllItems.
12. Click the Document Size drop-down list, and then select your document size from the list. This is necessary to make sure the scanned file is the correct size. 13. Click the File Size drop-down list, and then select your file size from the list. 14. Click the Remove Background Color drop-down list, and then select the level from the list. You can use this feature to remove the background color of documents to make the scanned data more legible. 15.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to SharePoint > Upload Scanned Data to a SharePoint Server Upload Scanned Data to a SharePoint Server >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Load your document. 2. Press (Scan). 3. Press a or b to select the [to SharePoint] option, and then press OK. 4. Press a or b to select one of the profiles listed, and then press OK.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) The Web Services protocol enables Windows 7, Windows 8 and Windows 10 users to scan using a Brother machine on the network. You must install the driver via Web Services.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) > Use Web Services to Install Drivers Used for Scanning (Windows 7, Windows 8, and Windows 10) Use Web Services to Install Drivers Used for Scanning (Windows 7, Windows 8, and Windows 10) Use Web Services to monitor printers on the network. • Make sure you have installed the Brother software and drivers.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) > Scan Using Web Services from the Brother Machine (Windows 7, Windows 8 and Windows 10) Scan Using Web Services from the Brother Machine (Windows 7, Windows 8 and Windows 10) If you have installed the driver for scanning via Web Services, you can access the Web Services scanning menu on your Brother machine's LCD.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10) > Configure Scan Settings for Web Services Configure Scan Settings for Web Services 1. Do one of the following: • Windows 7 Click • (Start) > Devices and Printers. Windows 8 Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Change Scan Button Settings from ControlCenter4 (Windows) Change Scan Button Settings from ControlCenter4 (Windows) 1. Click the (ControlCenter4) icon in the task tray, and then click Open. 2. Click the Device Settings tab. 3. Click the Device Scan Settings button. The Device Scan Settings dialog box appears. 4. Click the tab for the Scan to action you want to change (Image, OCR, E-mail, or File). 5. Change the settings as needed. 6.
Settings Applicable Features Image OCR E-mail File File Type Yes Yes Yes Yes Target Application Yes Yes - - OCR Language - Yes - - File Name Yes Yes Yes Yes Destination Folder or Scan Location Yes Yes Yes Yes Show Save As Window - - - Yes Show Folder - - - Yes File Size Priority Yes - Yes Yes Resolution Yes Yes Yes Yes Scan Type Yes Yes Yes Yes Document Size Yes Yes Yes Yes Brightness Yes Yes Yes Yes Contrast Yes Yes Yes Yes ID Card Scan
• Auto Use for any type of document. This mode automatically picks an appropriate color depth for the document. • Black & White Use for text or line art images. • Gray (Error Diffusion) Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray images without using true gray dots. Black dots are put in a specific pattern to give a gray appearance.) • True Gray Use for photographic images or graphics.
Related Topics: • Scan Photos and Graphics • Save Scanned Data to a Folder as a PDF File • Scan to an Editable Text File (OCR) • Scan to Email Attachment 122
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Change Scan Button Settings from Brother iPrint&Scan (Mac) Change Scan Button Settings from Brother iPrint&Scan (Mac) 1. In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon. The Brother iPrint&Scan screen appears. 2. If your Brother machine is not selected, click the Select your Machine button, and then follow the on-screen instructions to select your Brother machine. 3.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Configure Certificate for Signed PDF Configure Certificate for Signed PDF If you select Signed PDF for Scan features, you must configure a certificate on your machine using Web Based Management. To use Signed PDF, you must install a certificate on your machine and your computer. 1. Start your web browser.
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Disable Scanning from Your Computer Disable Scanning from Your Computer You can disable the ability to scan from your computer. Set the pull scan setting using Web Based Management. 1. Start your web browser. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP address of the machine or the print server name). For example: https://192.168.1.
Home > Scan > Scan from Your Computer (Windows) Scan from Your Computer (Windows) There are several ways you can use your computer to scan photos and documents on your Brother machine. Use the software applications provided by Brother, or use your favorite scanning application.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) Scan Using ControlCenter4 Home Mode (Windows) Use ControlCenter4 Home Mode to access your machine's main features.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) Scan Using ControlCenter4 Home Mode (Windows) Select Home Mode as the mode setting for ControlCenter4. 1. Load your document. (ControlCenter4) icon in the task tray, and then click Open. 2. Click the 3. Click the Scan tab. 4. Select the Document Type. 5. Change the document's Scan Size, if needed. 6. Click (Scan).
Related Information • Scan Using ControlCenter4 Home Mode (Windows) • Select Document Type Using ControlCenter4 Home Mode (Windows) • Change Scan Size Using ControlCenter4 Home Mode (Windows) • Crop a Scanned Image Using ControlCenter4 Home Mode (Windows) • Print Scanned Data Using ControlCenter4 Home Mode (Windows) • Scan to an Application Using ControlCenter4 Home Mode (Windows) 129
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Select Document Type Using ControlCenter4 Home Mode (Windows) Select Document Type Using ControlCenter4 Home Mode (Windows) • Select the Document Type option that matches the type of original you want to scan.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Select Document Type Using ControlCenter4 Home Mode (Windows) > Custom Scan Settings (Windows) Custom Scan Settings (Windows) Select Custom in the Document Type list to change advanced scan settings. • Select Custom, and then click the Custom Settings button. The Custom Scan Settings dialog box appears.
Brightness Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark, set a higher brightness level and scan the document again. You can also type a value into the field to set the Brightness level. Contrast Increase or decrease the Contrast level by moving the slider to the right or left.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Change Scan Size Using ControlCenter4 Home Mode (Windows) Change Scan Size Using ControlCenter4 Home Mode (Windows) For faster scan speeds, select the exact size of your document from the Scan Size drop-down menu.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Crop a Scanned Image Using ControlCenter4 Home Mode (Windows) Crop a Scanned Image Using ControlCenter4 Home Mode (Windows) The crop tool on the Image Editing Toolbar lets you trim unwanted areas from your scanned image. Use the Zoom In and Zoom Out tools to help view the image to be cropped. Image Editing Toolbar 1.
a. Expands the scanned image so that the entire image fits in the window. b. Zooms in on the image. c. Zooms out of the image. d. Rotates the image counter-clockwise 90 degrees. e. Rotates the image clockwise 90 degrees. f. Click and drag the frame to adjust the area to be cropped. 3. Click OK. The edited image appears in the image viewer.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Print Scanned Data Using ControlCenter4 Home Mode (Windows) Print Scanned Data Using ControlCenter4 Home Mode (Windows) Scan a document on your Brother machine, and then print copies using the printer driver features that are available in ControlCenter4. 1. Scan a document. 2. Click Print. a b c a. Shows which images are currently selected. b.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan to an Application Using ControlCenter4 Home Mode (Windows) Scan to an Application Using ControlCenter4 Home Mode (Windows) The Open with an Application button lets you scan an image directly into your graphics application for editing. Select Home Mode as the mode setting for ControlCenter4. 1. Load your document. 2.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Home Mode (Windows) Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Home Mode (Windows) Select Home Mode as the mode setting for ControlCenter4. 1. Load your document. 2. Click the (ControlCenter4) icon in the task tray, and then click Open. 3. Click the Scan tab. 4. Select the Document Type. 5.
To save the document as a password-protected PDF, select Secure PDF Single-Page (*.pdf) or Secure PDF Multi-Page (*.pdf) from the File Type drop-down list, click , and then type the password. 10. To change the file name, click the Change button, if needed. 11. Click the folder icon to browse and select the folder where you want to save your scanned documents. 12. Click OK. The scanned document is saved to the destination folder as a PDF.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Both Sides of a Document Automatically Using ControlCenter4 Home Mode (Windows) Scan Both Sides of a Document Automatically Using ControlCenter4 Home Mode (Windows) Related Models: MFC-L3770CDW Select Home Mode as the mode setting for ControlCenter4. 1. Load documents in the ADF. To scan both sides of a document automatically, you must use the ADF, not the flatbed scanner glass. 2.
• Click (Print) to print scanned data. • Click (Open with an Application) to open scanned data in another application. • Click (Send E-mail) to attach scanned data to an email. • Click (OCR) to convert your scanned document to an editable text file.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Home Mode (Windows) > Scan Settings for ControlCenter4 Home Mode (Windows) Scan Settings for ControlCenter4 Home Mode (Windows) Settings Applicable Features Open with an Application OCR Send E-mail Save File Type - Yes Yes Yes Target Application Yes Yes - - OCR Language - Yes - - File Name - - - Yes Scan Location - - - Yes Show Folder - - - Yes File Size Priority - - Yes Yes File Type Select the
Target Application Select the destination application from the drop-down list. OCR Language Set the optical character recognition (OCR) language to match the language of the scanned document's text. File Name Click Change to change the file name's prefix. Scan Location Select the Folder or SharePoint radio button to specify the destination where you want to save your scanned documents. Show Folder Select this option to automatically display the destination folder after scanning.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) Scan Using ControlCenter4 Advanced Mode (Windows) ControlCenter4 Advanced Mode gives you more control over the details of your machine's features and allows you to customize one-button scan actions.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan Photos and Graphics Using ControlCenter4 Advanced Mode (Windows) Scan Photos and Graphics Using ControlCenter4 Advanced Mode (Windows) Send scanned photos or graphics directly to your computer. Select Advanced Mode as the mode setting for ControlCenter4. 1. Load your document. 2. Click the (ControlCenter4) icon in the task tray, and then click Open. 3. Click the Scan tab. 4.
5. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed. • To change the file name, click Change. • To change Destination Folder, click the folder icon. • To preview and configure the scanned image, select the PreScan check box. 6. Click Scan. The machine starts scanning. The image opens in the application you have selected.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Advanced Mode (Windows) Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Advanced Mode (Windows) Scan documents and save them to a folder on your computer as PDF files. Select Advanced Mode as the mode setting for ControlCenter4. 1. Load your document. 2. Click the (ControlCenter4) icon in the task tray, and then click Open.
4. Click the File button. The scan settings dialog box appears. 5. Click the File Type drop-down list, and then select a PDF file. To save the document as a password-protected PDF, select Secure PDF Single-Page (*.pdf) or Secure PDF Multi-Page (*.pdf) from the File Type drop-down list, click , and then type the password. 6. Click the folder icon to browse and select the folder where you want to save your scanned documents. 7.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan Both Sides of a Document Automatically Using ControlCenter4 Advanced Mode (Windows) Scan Both Sides of a Document Automatically Using ControlCenter4 Advanced Mode (Windows) Related Models: MFC-L3770CDW Select Advanced Mode as the mode setting for ControlCenter4. 1. Load documents in the ADF. To scan both sides of a document automatically, you must use the ADF, not the flatbed scanner glass. 2.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan Both Sides of an ID Card Using ControlCenter4 Advanced Mode (Windows) Scan Both Sides of an ID Card Using ControlCenter4 Advanced Mode (Windows) Select Advanced Mode as the mode setting for ControlCenter4. 1. Place an ID card on the scanner glass. 2. Click the (ControlCenter4) icon in the task tray, and then click Open. 3. Click the Scan tab.
4. Click the File button. The scan settings dialog box appears. 5. Select the ID Card Scan check box. The instruction dialog box appears. 6. Read the instructions on the screen, and then click OK. 7. Change the scan settings, such as file format, file name, scan location, resolution and color, if needed. 8. Click Scan. The machine starts scanning one side of the identification card. 9. After the machine has scanned one side, turn over the identification card, and then click Continue to scan the other side.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan to Email Attachment Using ControlCenter4 Advanced Mode (Windows) Scan to Email Attachment Using ControlCenter4 Advanced Mode (Windows) Send a scanned document as an email attachment. • Select Advanced Mode as the mode setting for ControlCenter4. • The Scan to Email feature does not support Webmail services.
5. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed. • To change the file name, click Change. • To change Destination Folder, click the folder icon. • To preview and configure the scanned image, select the PreScan check box. 6. Click Scan. The machine starts scanning. Your default email application opens and the scanned image is attached to a new, blank email message.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan to an Editable Text File (OCR) Using ControlCenter4 Advanced Mode (Windows) Scan to an Editable Text File (OCR) Using ControlCenter4 Advanced Mode (Windows) Your machine can convert characters in a scanned document to text using optical character recognition (OCR) technology. You can edit this text using your preferred text-editing application.
5. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed. • To change the file name, click Change. • To change Destination Folder, click the folder icon. • To preview and configure the scanned image, select the PreScan check box. 6. Click Scan. The machine scans the document, converts it to editable text, and then sends it to your default word processing application.
Home > Scan > Scan from Your Computer (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) > Scan Settings for ControlCenter4 Advanced Mode (Windows) Scan Settings for ControlCenter4 Advanced Mode (Windows) Settings Applicable Features Image OCR E-mail File File Type Yes Yes Yes Yes Target Application Yes Yes - - OCR Language - Yes - - File Name Yes Yes Yes Yes Scan Location or Destination Folder Yes Yes Yes Yes Show Folder - - - Yes Show Save As Window - - -
• XML Paper Specification (*.xps) (the XML Paper Specification is available for Windows 7, Windows 8 and Windows 10, and when using applications that support XML Paper Specification files) For Email and File • Microsoft Office Word (*.docx) (Available only for certain models) • Microsoft Office PowerPoint (*.pptx) (Available only for certain models) • Microsoft Office Excel (*.xlsx)(Available only for certain models) For OCR • HTML 3.2 (*.htm) • HTML 4.0 (*.htm) • Microsoft Excel 2003, XP (*.
• Black & White Use for text or line art images. • Gray (Error Diffusion) Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray images without using true gray dots. Black dots are put in a specific pattern to give a gray appearance.) • True Gray Use for photographic images or graphics. This mode is more accurate because it uses up to 256 shades of gray. • 24bit Color Use to create an image with the most accurate color reproduction. This mode uses up to 16.
Related Information • Scan Using ControlCenter4 Advanced Mode (Windows) 159
Home > Scan > Scan from Your Computer (Windows) > Scan Using Nuance™ PaperPort™ 14SE or Other Windows Applications Scan Using Nuance™ PaperPort™ 14SE or Other Windows Applications You can use the Nuance™ PaperPort™ 14SE application for scanning. To download the Nuance™ PaperPort™ 14SE application, click • (Brother Utilities), select Do More in the left navigation bar, and then click PaperPort. • Nuance™ PaperPort™ 14SE supports Windows 7, Windows 8, Windows 8.1 and Windows 10.
8. Adjust the settings in the Scanner Setup dialog box, if needed. 9. Click the Document Size drop-down list, and then select your document size. To scan both sides of the document (MFC-L3770CDW): Automatic 2-sided scan is available only when using the ADF. You cannot use PreScan to preview an image. 10. Click PreScan if you want to preview your image and crop unwanted portions before scanning. 11. Click Start. The machine starts scanning.
Home > Scan > Scan from Your Computer (Windows) > Scan Using Nuance™ PaperPort™ 14SE or Other Windows Applications > TWAIN Driver Settings (Windows) TWAIN Driver Settings (Windows) • Note that the item names and assignable values will vary depending on the machine. • The Contrast option is available only when selecting the Gray (Error Diffusion), True Gray, or 24bit Color options from the Scan Type settings. 1.
4. Document Size Select the exact size of your document from a selection of preset scan sizes. If you select Custom..., the Custom Document Size dialog box appears and you can specify the document size. 5. Brightness Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark, set a higher brightness level and scan the document again.
Remove the base color of documents to make the scanned data more legible. - Color Drop Select a color to remove from the scanned image. - Edge Emphasis Make the characters of the original sharper. - Reduce Noise Improve and enhance the quality of your scanned images with this selection. The Reduce Noise option is available when selecting the 24bit Color option and the 300 x 300 dpi, 400 x 400 dpi, or 600 x 600 dpi scan resolution.
Home > Scan > Scan from Your Computer (Windows) > Scan Using Windows Fax and Scan Scan Using Windows Fax and Scan Windows Fax and Scan application is another option that you can use for scanning. • Windows Fax and Scan uses the WIA scanner driver. • If you want to crop a portion of a page after pre-scanning the document, you must scan using the scanner glass (also called the flatbed). 1. Load your document. 2. Launch Windows Fax and Scan. 3. Click File > New > Scan. 4.
Related Information • Scan from Your Computer (Windows) • WIA Driver Settings (Windows) 166
Home > Scan > Scan from Your Computer (Windows) > Scan Using Windows Fax and Scan > WIA Driver Settings (Windows) WIA Driver Settings (Windows) Paper source Select the Document Feeder or Flatbed option from the drop-down list. Picture Type (Image Type) Select Color picture, Grayscale picture, Black and white picture or text , or Custom Settings for the type of document you want to scan. To change advanced settings, click the Adjust the quality of the scanned picture link.
Brightness Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark, set a higher brightness level and scan the document again. Contrast Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasizes dark and light areas of the image, while a decrease reveals more details in gray areas.
Home > Scan > Scan from Your Computer (Mac) Scan from Your Computer (Mac) There are several ways you can use your Mac to scan photos and documents on your Brother machine. Use the software applications provided by Brother or your favorite scanning application.
Home > Scan > Scan from Your Computer (Mac) > Scan Using Brother iPrint&Scan (Mac) Scan Using Brother iPrint&Scan (Mac) 1. In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon. The Brother iPrint&Scan screen appears. 2. If your Brother machine is not selected, click the Select your Machine button, and then follow the on-screen instructions to select your Brother machine. 3. Click the Scan icon, and then follow the on-screen instructions to scan your documents.
Home > Scan > Scan from Your Computer (Mac) > Scan Using TWAIN-Compliant Applications (Mac) Scan Using TWAIN-Compliant Applications (Mac) You can also scan using TWAIN-compliant applications. For more information about the scanning procedure, see the manual for your application. To use Brother TWAIN Driver, go to your model's Downloads page on the Brother Solutions Center at support.brother.com and download Scanner Driver (TWAIN). 1. Start your graphics application, and then select the scan operation.
Related Information • Scan from Your Computer (Mac) 172
Home > Scan > Scan from Your Computer (Mac) > TWAIN Driver Settings (Mac) TWAIN Driver Settings (Mac) • Item names and assignable values will vary depending on the machine. • The Contrast setting is available only when selecting Gray (Error Diffusion), True Gray, or 24bit Color from the Scan Type options. 1. Resolution Select a scanning resolution from the Resolution pop-up menu. Higher resolutions take more memory and transfer time, but produce a finer scanned image. 2.
• 24bit Color Use to create an image with the most accurate color reproduction. This mode uses up to 16.8 million colors to scan the image, but it requires the most memory and has the longest transfer time. 3. Document Size Select the exact size of your document from a selection of preset scan sizes. • If you select Custom, you can specify the document size. 4. Adjust Image Click the Adjust Image button to adjust other image qualities.
6. Rotate Image Rotate the scanned image.
Home > Scan > Configure Scan Settings Using Web Based Management Configure Scan Settings Using Web Based Management • Set the Scan File Name Using Web Based Management • Set the Scan Job Email Report Using Web Based Management 176
Home > Scan > Configure Scan Settings Using Web Based Management > Set the Scan File Name Using Web Based Management Set the Scan File Name Using Web Based Management Set up a file name for scanned data using Web Based Management. 1. Start your web browser. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP address of the machine or the print server name). For example: https://192.168.1.
Home > Scan > Configure Scan Settings Using Web Based Management > Set the Scan Job Email Report Using Web Based Management Set the Scan Job Email Report Using Web Based Management When you scan a document, the machine will send a scan job email report automatically to the registered email address. 1. Start your web browser. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP address of the machine or the print server name). For example: https://192.
Home > Copy Copy • Copy a Document • Enlarge or Reduce Copied Images • Make N in 1 Copies Using the Page Layout Feature • Sort Copies • Copy an ID Card • Copy on Both Sides of the Paper (2-sided Copy) • Copy Options 179
Home > Copy > Copy a Document Copy a Document >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Make sure you have loaded the correct size paper in the paper tray. 2. Do one of the following: • Place the document face up in the ADF. (available only for certain models) (If you are copying multiple pages, we recommend using the ADF.) • Place the document face down on the scanner glass. 3. Press a or b to enter the number of copies you want.
2. Do one of the following: • Place the document face up in the ADF. (If you are copying multiple pages, we recommend using the ADF.) • Place the document face down on the scanner glass. 3. Press [Copy]. The LCD displays: 4. Change the copy settings, if needed. (Number of copies) • Enter the number of copies in one of the following ways: • or on the LCD. - Press - Press the numbers on the control panel. [Options] Press to change the copy settings for the next copy only.
• - When finished, press [OK]. (If the [OK] button is displayed.) - After you have finished choosing new options, you can save them by pressing the [Save as Shortcut] button. Quick Copy Press > to access the preset copy settings. • Current setting Press the following icons or display area to change these settings for the next copy only. The icon displayed varies depending on the model. - [Enlarge/Reduce] - [Density] - [Tray Use] - [2-sided Copy] - [Quality] - [Contrast] 5.
Home > Copy > Enlarge or Reduce Copied Images Enlarge or Reduce Copied Images Select an enlargement or reduction ratio to resize your copied data. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Load your document. 2. Press a or b to enter the number of copies you want. 3. Press Copy/Scan Options. 4. Press a or b to select [Enlarge/Reduce], and then press OK. 5. Press a or b to select the enlargement or reduction ratio you want, and then press OK.
Home > Copy > Make N in 1 Copies Using the Page Layout Feature Make N in 1 Copies Using the Page Layout Feature The N in 1 copy feature saves paper by copying two or four pages of your document onto one page of the copy. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Load your document. 2. Press a or b to enter the number of copies you want. 3. Press Copy/Scan Options. 4. Press a or b to select [Page Layout], and then press OK. 5.
Option Description 4in1(Portrait) 4in1(Landscape) 6. When finished, press [OK]. (If the [OK] button is displayed.) 7. Press [Color Start] or [Black Start]. If you placed the document in the ADF, the machine scans the pages and starts printing. 8. If you are using the scanner glass, repeat the following steps for each page of the document: • Place the next page on the scanner glass, and then press [Continue] to scan the page. • After scanning all the pages, press [Finish].
Home > Copy > Sort Copies Sort Copies Sort multiple copies. Pages will be stacked in the order they are fed, that is: 1, 2, 3, and so on. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Load your document. 2. Press a or b to enter the number of copies you want. 3. Press Copy/Scan Options. 4. Press a or b to select [Stack/Sort], and then press OK. 5. Press a or b to select [Sort], and then press OK. 6. Press Black Start or Color Start.
Home > Copy > Copy an ID Card Copy an ID Card You may copy an identification card only to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Place an identification card face down near the upper left corner of the scanner glass. 1 1 0.16 in. (4.0 mm) or greater (top, left) 2. Press 2 in 1 (ID) Copy. 3.
MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Place your identification card face down near the upper left corner of the scanner glass. 1 1: Distance 0.16 in. (4.0 mm) or greater (top, left) 2. Press [Copy]. 3. Press > on the touchscreen, and then select [2in1(ID)]. 4. Enter the number of copies. 5. Press [Color Start] or [Black Start]. The machine scans one side of the identification card. 6. After the machine has scanned the first side, turn over the identification card. 7.
Home > Copy > Copy on Both Sides of the Paper (2-sided Copy) Copy on Both Sides of the Paper (2-sided Copy) Related Models: HL-L3290CDW/DCP-L3551CDW/MFC-L3750CDW/MFC-L3770CDW Reduce the amount of paper you use by copying onto both sides of the paper. • You must choose a 2-sided copy layout from the following options before you can start 2-sided copying. • The layout of your original document determines which 2-sided copy layout you should choose.
HL-L3290CDW/DCP-L3551CDW 1. Load your document. 2. Press a or b to enter the number of copies you want. 3. Press Copy/Scan Options. 4. Press a or b to select [2-sided], and then press OK. 5. Press a or b to display [Layout Long] or [Layout Short], and then press OK. 6. Select flip on long edge or flip on short edge, and then press OK. 7. Press a or b to display [2sided → 2sided] or [1sided → 2sided], and then press OK. If you select [2sided → 2sided], you cannot use the ADF. Use the scanner glass. 8.
Related Information • Copy 191
Home > Copy > Copy Options Copy Options >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW To change Copy settings, press the Options or Copy/Scan Options button. Menu selections Options Enlarge/Reduce Select an enlargement or reduction ratio for the next copy. • Density If you select Custom(25-400%), use the dial pad, or press a or b to enter an enlargement or reduction ratio. Increase the density to make the text darker.
Menu selections Options Page Layout Make N in 1 copies. 4 in1 Auto Deskew Set the machine to automatically correct skewed copies. Color Adjust Change the default setting for color saturation. Remove Bkg Clr Select to remove the background color of the document when copying. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW To change the Copy settings, press [Options]. Menu selections Options Enlarge/Reduce 100% - Enlarge Select an enlargement ratio for the next copy.
Menu selections Options Contrast Increase the contrast to make an image clearer. Decrease the contrast to make an image more subdued. Stack/Sort Select to stack or sort multiple copies. Stack 1 1 2 2 Sort 2 Page Layout 1 2 1 Make N in 1 copies. 4 in1 Auto Deskew Set the machine to automatically correct skewed copies. Color Adjust Change the default setting for color saturation. Remove Background Color Select to remove the background color of the document when copying.
Home > Fax Fax • Send a Fax • Receive a Fax • Voice Operations and Fax Numbers • Telephone Services and External Devices • Fax Reports • PC-FAX 195
Home > Fax > Send a Fax Send a Fax • Send a Fax • Send a 2-sided Fax from the ADF • Send a Fax Manually • Send a Fax at the End of a Conversation • Send the Same Fax to More than One Recipient (Broadcasting) • Send a Fax in Real Time • Send a Fax at a Specified Time (Delayed Fax) • Add a Cover Page to Your Fax • Cancel a Fax in Progress • Check and Cancel a Pending Fax • Fax Options 196
Home > Fax > Send a Fax > Send a Fax Send a Fax Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Do one of the following: • Place the document face up in the ADF. (If you are faxing multiple pages, we recommend using the ADF.) • Place the document face down on the scanner glass. 2. Press [Fax]. 3. Enter the fax number. • Using the dial pad Press the digits to enter the fax number.
- Press [Search], and then enter the name and press [OK]. Press the name you want to dial. When finished, press [Apply]. • Using the call history [Call History], and then press the [Outgoing Call] option. Press Swipe up or down or press a or b to display the fax number you want, and then press it. To send a fax, press [Apply]. 4. Press [Fax Start]. The machine scans and sends the document. If you placed the document on the scanner glass, follow the instructions in the table.
Home > Fax > Send a Fax > Send a 2-sided Fax from the ADF Send a 2-sided Fax from the ADF Related Models: MFC-L3770CDW You must select a 2-sided scanning format before sending a 2-sided fax. Select either Long Edge or Short Edge, depending on the layout of your document. 1. Load your document. 2. Press [Fax] > [Options] > [2-sided Fax]. 3. Do one of the following: • If your document is flipped on the Long edge, press the [2-sided Scan: Long Edge] option.
Home > Fax > Send a Fax > Send a Fax Manually Send a Fax Manually Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Manual fax transmission lets you hear the dialing, ringing and fax-receiving tones while sending a fax. 1. Load your document. 2. Press [Fax]. 3. Press [Hook] and listen for a dial tone. 4. Dial the fax number you want to call. 5. When you hear the fax tone, press [Fax Start]. • If you are using the scanner glass, press [Send].
Home > Fax > Send a Fax > Send a Fax at the End of a Conversation Send a Fax at the End of a Conversation Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW At the end of a conversation, you can send a fax to the other party before you both hang up. 1. Ask the other party to wait for fax tones (beeps) and then to press the Start key before hanging up. 2. Load your document. 3. Press [Fax Start]. • If you are using the scanner glass, press [Send]. 4. Replace the handset of an external telephone.
Home > Fax > Send a Fax > Send the Same Fax to More than One Recipient (Broadcasting) Send the Same Fax to More than One Recipient (Broadcasting) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use the Broadcasting feature to send the same fax to multiple fax numbers at the same time. • The same broadcast can include Groups, Address Book numbers and up to 50 manually dialed numbers. • Address Book numbers must be stored in the machine’s memory before they can be used in a broadcast.
Home > Fax > Send a Fax > Send the Same Fax to More than One Recipient (Broadcasting) > Cancel a Broadcast in Progress Cancel a Broadcast in Progress Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW While broadcasting you can cancel the fax currently being sent or the whole broadcast job. 1. Press . 2. Press . 3. Do one of the following: • To cancel the entire broadcast, press [Entire Broadcast]. • To cancel the current job, press the name or number being dialed on the LCD.
Home > Fax > Send a Fax > Send a Fax in Real Time Send a Fax in Real Time Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW When sending a fax, the machine scans the document into the memory before sending it. As soon as the telephone line is free, the machine starts dialing and sending. If you want to send an important document immediately without waiting for the machine to retrieve the scan from its memory, turn on [Real Time TX].
Home > Fax > Send a Fax > Send a Fax at a Specified Time (Delayed Fax) Send a Fax at a Specified Time (Delayed Fax) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can store up to 50 faxes in the machine's memory to be sent within the next twenty-four hour period. 1. Load your document. 2. Press [Fax] > [Options] > [Delayed Fax] > [Delayed Fax]. 3. Press [On]. 4. Press [Set Time]. 5.
Home > Fax > Send a Fax > Add a Cover Page to Your Fax Add a Cover Page to Your Fax Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can add a cover page to the next fax or every outgoing fax. • This feature will not work unless you have programmed your Station ID. • Your cover page includes your Station ID, a comment, and the name stored in the Address Book. 1. Load your document. 2. Press [Fax] > [Options] > [Coverpage Setup] > [Coverpage Setup]. 3. Press [On]. 4.
Home > Fax > Send a Fax > Add a Cover Page to Your Fax > Create a Cover Page Message Create a Cover Page Message Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can create one or two custom cover page messages to add to outgoing faxes. 1. Press [Settings] > [All Settings] > [Fax] > [Setup Send] > [Coverpage Message]. 2. Press [5] or [6] to store your customized message. 3. Enter the cover page message using the LCD. Press [OK]. Press 4. Press to choose numbers, letters or special characters. .
Home > Fax > Send a Fax > Cancel a Fax in Progress Cancel a Fax in Progress Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Press . 2. Press while the machine is dialing or sending a fax. The LCD will display [Cancel Job?]. 3. Press an option in the table to cancel or continue the fax job in progress. Option Description Yes The machine cancels sending the fax job. No The machine exits from the process without canceling the fax job.
Home > Fax > Send a Fax > Check and Cancel a Pending Fax Check and Cancel a Pending Fax Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can cancel a fax job before it is sent, by canceling the fax job while it is stored and waiting in the memory. 1. Press [Settings] > [All Settings] > [Fax] > [Remaining Jobs]. 2. Swipe up or down or press a or b to scroll through the waiting jobs, and then press the job you want to cancel. 3. Press [Cancel]. 4.
Home > Fax > Send a Fax > Fax Options Fax Options Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW To change fax-sending settings, press the [Options] button. Option Description Fax Resolution Set the resolution for outgoing faxes. The fax quality often can be improved by changing the Fax Resolution. Contrast Adjust the contrast. If your document is very light or very dark, changing the contrast may improve the fax quality. 2-sided Fax Set the 2-sided scanning format.
Home > Fax > Receive a Fax Receive a Fax • Receive Mode Settings • Memory Receive Options • Remote Fax Retrieval 211
Home > Fax > Receive a Fax > Receive Mode Settings Receive Mode Settings • Receive Modes Overview • Choose the Correct Receive Mode • Set the Number of Rings Before the Machine Answers (Ring Delay) • Set the F/T Ring Time (Pseudo/Double-ring) • Set Easy Receive • Shrink Page Size of an Oversized Incoming Fax • Set the 2-sided Printing for Received Faxes • Set the Fax Receive Stamp • Receive a Fax at the End of a Telephone Conversation 212
Home > Fax > Receive a Fax > Receive Mode Settings > Receive Modes Overview Receive Modes Overview Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Some receive modes answer automatically (Fax Only Mode and Fax/Tel Mode). You may want to change the Ring Delay before using these modes. Fax Only Mode ([Fax Only] in the machine's menu) Fax Only Mode automatically answers every call as a fax.
Home > Fax > Receive a Fax > Receive Mode Settings > Choose the Correct Receive Mode Choose the Correct Receive Mode Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW The correct Receive Mode for you is determined by the external devices and telephone subscriber services (Voice Mail, Distinctive Ring and so on) you will be using on the same line as the Brother machine.
Home > Fax > Receive a Fax > Receive Mode Settings > Set the Number of Rings Before the Machine Answers (Ring Delay) Set the Number of Rings Before the Machine Answers (Ring Delay) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW When somebody calls your machine, you will hear the normal telephone ring sound. The number of rings is set in the Ring Delay option. • The Ring Delay setting sets the number of times the machine rings before it answers in the Fax Only and Fax/Tel Modes.
Home > Fax > Receive a Fax > Receive Mode Settings > Set the F/T Ring Time (Pseudo/Double-ring) Set the F/T Ring Time (Pseudo/Double-ring) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW When you set the Receive Mode to Fax/Tel Mode, if the call is a fax, your machine will automatically receive it. However, if it is a voice call, the machine will sound the F/T ring (pseudo/double-ring) for the time you set in the F/T Ring Time option.
Home > Fax > Receive a Fax > Receive Mode Settings > Set Easy Receive Set Easy Receive Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If Easy Receive is On: The machine can receive a fax automatically, even if you answer the call. When you see [Receiving] on the LCD or hear a click on the phone line through the handset you are using, just replace the handset. Your machine will do the rest.
Home > Fax > Receive a Fax > Receive Mode Settings > Shrink Page Size of an Oversized Incoming Fax Shrink Page Size of an Oversized Incoming Fax Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If you enable the auto reduction function, the machine reduces each page of an incoming fax to fit on your paper. The machine calculates the reduction ratio by using the page size of the fax and your Paper Size setting. 1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Auto Reduction]. 2.
Home > Fax > Receive a Fax > Receive Mode Settings > Set the 2-sided Printing for Received Faxes Set the 2-sided Printing for Received Faxes Related Models: MFC-L3750CDW/MFC-L3770CDW Your machine prints received faxes on both sides of the paper when [2-sided] is set to [On]. • Use Letter, Legal, Folio (8.5 in. × 13 in.) or Mexico Legal size paper for this function [16 to 28 lb (60 to 105 g/m2)].
Home > Fax > Receive a Fax > Receive Mode Settings > Set the Fax Receive Stamp Set the Fax Receive Stamp Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can set the machine to print the received date and time at the top center of each received fax page. • Make sure you have set the current date and time on the machine. 1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Fax Rx Stamp]. 2. Press [On] or [Off]. 3. Press .
Home > Fax > Receive a Fax > Receive Mode Settings > Receive a Fax at the End of a Telephone Conversation Receive a Fax at the End of a Telephone Conversation Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If you are speaking on the telephone connected to your Brother machine and the other party is also speaking on a telephone connected to his fax machine, at the end of the conversation, the other party can send you a fax before you both hang up. Your machine's ADF must be empty. 1.
Home > Fax > Receive a Fax > Memory Receive Options Memory Receive Options Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use Memory Receive options to direct incoming faxes while you are away from the machine. You can use only one Memory Receive option at a time. Memory Receive can be set to: • Fax Forwarding • Fax Storage • PC-Fax Receive • Forward to Cloud The machine forwards your received faxes to online services.
Home > Fax > Receive a Fax > Memory Receive Options > Forward Incoming Faxes to Another Machine Forward Incoming Faxes to Another Machine Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use the Fax Forwarding feature to automatically forward your incoming faxes to another machine. 1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Memory Receive]. 2. Press [Fax Forward]. 3.
Home > Fax > Receive a Fax > Memory Receive Options > Store Incoming Faxes in the Machine's Memory Store Incoming Faxes in the Machine's Memory Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use the Fax Storage feature to store incoming faxes in the machine's memory. Retrieve your stored fax messages from your fax machine when you are at another location using the Remote Retrieval commands. Your machine will print a backup copy of each stored fax. 1.
Home > Fax > Receive a Fax > Memory Receive Options > Change Memory Receive Options Change Memory Receive Options Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If received faxes are in your machine's memory when you change the Remote Fax operations, the LCD will ask you one of the following questions: If received faxes have been printed automatically, the LCD displays [Erase all faxes?] • Do one of the following: - If you press [Yes], faxes in the memory will be erased before the setting changes.
Home > Fax > Receive a Fax > Memory Receive Options > Turn Off Memory Receive Turn Off Memory Receive Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Turn off Memory Receive if you do not want the machine to save or transfer incoming faxes. 1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Memory Receive]. 2. Press [Off]. The LCD displays options if there are received faxes still in your machine's memory. 3. Press .
Home > Fax > Receive a Fax > Memory Receive Options > Print a Fax Stored in the Machine's Memory Print a Fax Stored in the Machine's Memory Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If you select [Fax Storage], you can still print a fax from the memory when you are at your machine. 1. Press [Settings] > [All Settings] > [Fax] > [Print Fax]. 2. Press [Yes].
Home > Fax > Receive a Fax > Memory Receive Options > Use PC-Fax Receive to Transfer Received Faxes to Your Computer (Windows only) Use PC-Fax Receive to Transfer Received Faxes to Your Computer (Windows only) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Turn on the PC-Fax Receive feature, automatically store incoming faxes to your machine's memory, and then send them to your computer. Use your computer to view and store these faxes.
Home > Fax > Receive a Fax > Remote Fax Retrieval Remote Fax Retrieval Use Remote Retrieval to call your machine from any touch-tone telephone or fax machine, and use a remote access code and remote commands to retrieve fax messages.
Home > Fax > Receive a Fax > Remote Fax Retrieval > Set a Remote Access Code Set a Remote Access Code Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Set a Remote Access Code to access and control your Brother machine even when you are away from it. Before you can use the remote access and retrieval features, you must set up your own code. The factory default code is the inactive code (---*). 1. Press [Settings] > [All Settings] > [Fax] > [Remote Access]. 2.
Home > Fax > Receive a Fax > Remote Fax Retrieval > Use Your Remote Access Code Use Your Remote Access Code Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Dial your fax number from a telephone or another fax machine using touch tone. 2. When your machine answers, immediately enter your Remote Access Code (three digits followed by *). 3. The machine signals if it has received messages: • One long beep -- Fax messages • No beeps -- No messages 4.
Home > Fax > Receive a Fax > Remote Fax Retrieval > Remote Retrieval Commands Remote Retrieval Commands Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use the Remote Commands in this table to access fax commands and options when you are away from your Brother machine. When you call the machine and enter your remote access code (three digits followed by *), the system will sound two short beeps and you must enter a Remote Command (column 1), followed by one of the options (column 2) for that command.
Home > Fax > Receive a Fax > Remote Fax Retrieval > Forward Faxes Remotely Forward Faxes Remotely Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Call your Brother machine from any touch-tone telephone or fax machine to forward incoming faxes to another machine. You must turn on Fax Storage to use this feature. 1. Dial your fax number. 2. When your machine answers, enter your Remote Access Code (three digits followed by *). If you hear one long beep, you have messages. 3.
Home > Fax > Receive a Fax > Remote Fax Retrieval > Change the Fax Forwarding Number Change the Fax Forwarding Number Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can change your fax forwarding number from another touch-tone telephone or fax machine. 1. Dial your fax number. 2. When your machine answers, enter your Remote Access Code (three digits followed by *). If you hear one long beep, you have messages. 3. When you hear two short beeps, press 9 5 4. 4.
Home > Fax > Voice Operations and Fax Numbers Voice Operations and Fax Numbers • Voice Operations • Store Fax Numbers • Set up Groups for Broadcasting • Dial Access Codes and Credit Card Numbers 235
Home > Fax > Voice Operations and Fax Numbers > Voice Operations Voice Operations • Send Tone Signals (For Canada) • Pick up a Voice Call in Fax/Tel Receive Mode • Special Line Considerations 236
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Send Tone Signals (For Canada) Send Tone Signals (For Canada) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If you have a Pulse dialing service, but must send Tone signals (for example, for telephone banking), follow these steps. If you have a Touch Tone service, you will not need this feature to send tone signals. 1. Press [Fax]. 2. Press [Hook]. 3. Press # on the machine's LCD.
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Pick up a Voice Call in Fax/Tel Receive Mode Pick up a Voice Call in Fax/Tel Receive Mode Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW When the machine is in Fax/Tel mode, it will use the F/T Ring (pseudo/double-ring) to alert you to pick up a voice call.
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations Special Line Considerations • Rollover Telephone Lines • Two-Line Telephone System • Convert Telephone Wall Outlets • Install Your Brother Machine, an External Two-Line TAD and Two-Line Telephone 239
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations > Rollover Telephone Lines Rollover Telephone Lines Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW A rollover telephone system is a group of two or more separate telephone lines that pass incoming calls to each other if they are busy. This feature is available only in the USA and Canada. The calls are usually passed down or 'rolled over' to the next available telephone line in a preset order.
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations > Two-Line Telephone System Two-Line Telephone System Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW A two-line telephone system is nothing more than two separate telephone numbers on the same wall outlet. This feature is available only in the USA and Canada. The two telephone numbers can be on separate jacks (RJ11) or combined into one jack (RJ14). Your machine must be plugged into an RJ11 jack.
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations > Convert Telephone Wall Outlets Convert Telephone Wall Outlets Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW This feature is available only in the USA and Canada. There are three ways to convert to an RJ11 jack. The first two ways may require assistance from the telephone company. You can change the wall outlets from one RJ14 jack to two RJ11 jacks.
Home > Fax > Voice Operations and Fax Numbers > Voice Operations > Special Line Considerations > Install Your Brother Machine, an External Two-Line TAD and Two-Line Telephone Install Your Brother Machine, an External Two-Line TAD and Two-Line Telephone Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW When you are installing an external two-line telephone answering device (TAD) and a two-line telephone, your machine must be isolated on one line at both the wall jack and at the TAD.
Home > Fax > Voice Operations and Fax Numbers > Store Fax Numbers Store Fax Numbers Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW • Store Address Book Numbers • Change or Delete Address Book Names or Numbers 244
Home > Fax > Voice Operations and Fax Numbers > Store Fax Numbers > Store Address Book Numbers Store Address Book Numbers Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Press [Fax] > [Address Book]. 2. Do the following steps: a. Press [Edit]. b. Press [Add New Address]. c. Press [Name]. d. Enter the name using the LCD (up to 16 characters), and then press [OK]. e. Press [Address]. f. Enter the fax or telephone number using the LCD (up to 20 digits), and then press [OK]. g. Press [OK].
Home > Fax > Voice Operations and Fax Numbers > Store Fax Numbers > Store Address Book Numbers > Store Address Book Numbers from Outgoing Calls Store Address Book Numbers from Outgoing Calls Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can store Address Book numbers from the Outgoing Call history. [Fax] > [Call History] > [Outgoing Call]. 1. Press 2. Swipe up or down or press a or b to display the number you want, and then press it. 3. Press [Edit] > [Add to Address Book] > [Name].
Home > Fax > Voice Operations and Fax Numbers > Store Fax Numbers > Change or Delete Address Book Names or Numbers Change or Delete Address Book Names or Numbers Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Press [Fax] > [Address Book] > [Edit]. 2. Do one of the following: • Press [Change] to edit the names or fax or telephone numbers. Swipe up or down or press a or b to display the number you want to change, and then press it. - To change the name, press [Name].
Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting Set up Groups for Broadcasting Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW A Group, which can be stored in the Address Book allows you to send the same fax message to many fax numbers. First, you must store each fax number in the Address Book. Then you can include them as numbers in the Group. Each Group uses up an Address Book number.
Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting > Change a Broadcasting Group Name Change a Broadcasting Group Name Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW [Fax] > [Address Book] > [Edit] > [Change]. 1. Press 2. Swipe up or down or press a or b to display the Group you want, and then press the Group name. 3. Press [Name]. 4. Enter the new Group name (up to 16 characters) using the LCD, and then press [OK].
Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting > Delete a Broadcasting Group Delete a Broadcasting Group Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW [Fax] > [Address Book] > [Edit] > [Delete]. 1. Press 2. Swipe up or down or press a or b to display the Group you want, and then press the Group name. 3. Press [OK]. 4. Press .
Home > Fax > Voice Operations and Fax Numbers > Set up Groups for Broadcasting > Add or Delete a Broadcasting Group Member Add or Delete a Broadcasting Group Member Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW [Fax] > [Address Book] > [Edit] > [Change]. 1. Press 2. Swipe up or down or press a or b to display the Group you want, and then press the Group name. 3. Swipe up or down or press a or b to display the [Add/Delete] option, and then press [Add/Delete]. 4.
Home > Fax > Voice Operations and Fax Numbers > Dial Access Codes and Credit Card Numbers Dial Access Codes and Credit Card Numbers Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Sometimes you may want to choose from several long-distance carriers when you send a fax. Rates may vary depending on the time and destination. To take advantage of low rates, you can store the access codes of longdistance carriers and credit card numbers as Address Book numbers.
Home > Fax > Telephone Services and External Devices Telephone Services and External Devices • Voice Mail • Distinctive Ring • External TAD (Telephone Answering Device) • External and Extension Telephones • Multi-line Connections (PBX) 253
Home > Fax > Telephone Services and External Devices > Voice Mail Voice Mail Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW This feature is available only in the USA and Canada. If you have Voice Mail on the same telephone line as your Brother machine, Voice Mail and the Brother machine will conflict with each other when receiving incoming calls.
Home > Fax > Telephone Services and External Devices > Distinctive Ring Distinctive Ring Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW This feature is available only in the USA and Canada. Distinctive Ring is a function of your Brother machine that allows a person with one line to receive fax and voice calls through two different phone numbers on that one line.
Ring Pattern Rings 1 short-short or long-long 2 short-long-short 3 short-short-long 4 very long (normal pattern) • Ring Pattern #1 is often called Short-Short and is the most commonly used. • If the ring pattern you received is not on this chart, contact your telephone company and ask for one that is shown. • The machine will answer only calls to its registered number. • The first two rings are silent on the machine.
Home > Fax > Telephone Services and External Devices > Distinctive Ring > Register the Distinctive Ring Pattern Register the Distinctive Ring Pattern Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW This feature is available only in the USA and Canada. After you set the Distinctive Ring feature to [On], your Distinctive Ring number will receive faxes automatically. The receive mode is automatically set to [Manual] and you cannot change it to another receive mode while Distinctive Ring is set to [On].
Home > Fax > Telephone Services and External Devices > Distinctive Ring > Turn Off Distinctive Ring Turn Off Distinctive Ring Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW This feature is available only in the USA and Canada. 1. Press [Settings] > [All Settings] > [Fax] > [Miscellaneous] > [Distinctive] > [Distinctive]. 2. Press [Off]. 3. Press . If you turn off Distinctive Ring, the machine will stay in Manual Mode. You must set the Receive Mode again.
Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering Device) External TAD (Telephone Answering Device) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can connect an external Telephone Answering Device (TAD) to the same line as your machine. When the TAD answers a call, your machine will “listen” for the CNG (fax calling) tones sent by a sending fax machine. If it hears them it will take over the call and receive the fax.
Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering Device) > Connect an External TAD Connect an External TAD Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW The external TAD must be plugged into the back of the machine, into the jack labeled EXT. Your machine cannot work correctly if you plug the TAD into a wall jack (unless you are using Distinctive Ring). 1.
Home > Fax > Telephone Services and External Devices > External TAD (Telephone Answering Device) > Record an Outgoing Message (OGM) on the External TAD Record an Outgoing Message (OGM) on the External TAD Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Record 5 seconds of silence at the beginning of your message. This allows your machine time to listen for fax tones. 2. Limit your speaking to 20 seconds. 3. End your 20-second message by giving your Fax Receive Code for people sending manual faxes.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones External and Extension Telephones • Connect an External or Extension Telephone • Operation from External and Extension Telephones • If You Use a Non-Brother Cordless External Handset • Use the Remote Codes 262
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Connect an External or Extension Telephone Connect an External or Extension Telephone Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can connect a separate telephone to your machine as shown in the diagram below. Connect the telephone line cord to the jack labeled EXT. Before you connect an external telephone, remove the protective cap (3) from the EXT. jack on the machine.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Operation from External and Extension Telephones Operation from External and Extension Telephones Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use extension telephones If you answer a fax call at an extension telephone, you can make your machine receive the fax by pressing the Fax Receive Code *51.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > If You Use a Non-Brother Cordless External Handset If You Use a Non-Brother Cordless External Handset Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If your non-Brother cordless telephone is connected to the EXT. jack of the machine and you typically carry the cordless handset elsewhere, it is easier to answer calls during the Ring Delay.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Use the Remote Codes Use the Remote Codes Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Fax Receive Code If you answer a fax call on an extension telephone, you can tell your machine to receive it by pressing the Fax Receive Code *51. Wait for the chirping sounds, and then replace the handset.
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Use the Remote Codes > Change the Remote Codes Change the Remote Codes Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW The preset Fax Receive Code is *51. The preset Telephone Answer Code is #51. If you are always disconnected when accessing your External TAD remotely, try changing the three-digit remote codes, for example to ### and 999. 1.
Home > Fax > Telephone Services and External Devices > Multi-line Connections (PBX) Multi-line Connections (PBX) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW We suggest you ask the company that installed your PBX to connect your machine. If you have a multi line system we suggest you ask the installer to connect the unit to the last line on the system. This prevents the machine being activated each time the system receives telephone calls.
Home > Fax > Fax Reports Fax Reports • Print a Transmission Verification Report • Print a Fax Journal 269
Home > Fax > Fax Reports > Print a Transmission Verification Report Print a Transmission Verification Report Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can use the Transmission Verification Report as proof that you sent a fax. This report lists the receiving party's name or fax number, the time and date of transmission, duration of transmission, number of pages sent, and whether or not the transmission was successful.
Home > Fax > Fax Reports > Print a Fax Journal Print a Fax Journal Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can set the machine to print a Fax Journal at specific intervals (every 50 faxes, 6, 12 or 24 hours, 2 or 7 days). 1. Press [Settings] > [All Settings] > [Fax] > [Report Setting] > [Journal Period] > [Journal Period]. 2. Swipe up or down or press a or b to select an interval, and then press it.
Home > Fax > PC-FAX PC-FAX Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW • PC-FAX for Windows • PC-FAX for Mac 272
Home > Fax > PC-FAX > PC-FAX for Windows PC-FAX for Windows • PC-FAX Overview (Windows) • Send a Fax Using PC-FAX (Windows) • Receive Faxes on Your Computer (Windows) 273
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) PC-FAX Overview (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Reduce paper consumption and save time by using Brother's PC-FAX software to send faxes directly from your machine.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure PC-FAX (Windows) Configure PC-FAX (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Before sending faxes using PC-FAX, personalize the send options in each tab of the PC-FAX Setup dialog box. 1. Do one of the following: • Windows 7 Click (Start) > All Programs > Brother > Brother Utilities. Click the drop-down list and select your model name (if not already selected).
Related Information • PC-FAX Overview (Windows) 276
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) Configure your PC-Fax Address Book (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Add, edit and delete members and groups to personalize your Brother Address Book.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Add a Member to your PC-FAX Address Book (Windows) Add a Member to your PC-FAX Address Book (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Add new people and their fax information to the PC-Fax Address Book if you want to send a fax using Brother PC-Fax software. 1. Do one of the following: • Windows 7 (Start) > All Programs > Brother > Brother Utilities.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Create a Group in your PC-FAX Address Book (Windows) Create a Group in your PC-FAX Address Book (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Create a group to broadcast the same PC-FAX to several recipients at one time. 1. Do one of the following: • Windows 7 (Start) > All Programs > Brother > Brother Utilities.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Edit Member or Group Information in your PC-FAX Address Book (Windows) Edit Member or Group Information in your PC-FAX Address Book (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Do one of the following: • Windows 7 Click (Start) > All Programs > Brother > Brother Utilities. Click the drop-down list and select your model name (if not already selected).
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Delete a Member or Group in your PC-FAX Address Book (Windows) Delete a Member or Group in your PC-FAX Address Book (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Do one of the following: • Windows 7 Click (Start) > All Programs > Brother > Brother Utilities. Click the drop-down list and select your model name (if not already selected).
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Export your PC-FAX Address Book (Windows) Export your PC-FAX Address Book (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can export the Address Book as an ASCII text file (*.csv), a vCard (an electronic business card), or Remote Setup Dial Data and save it on your computer. • You cannot export the group settings when you export the Address Book data. 1.
4. In the Available Items field, select the data you want to export, and then click Add >>. Select and add the items in the order you want them listed. 5. If you are exporting to an ASCII file, under the Divide Character section, select the Tab or Comma option to separate the data fields. 6. Click OK. 7. Browse to the folder on your computer where you want to save the data, type the file name, and then click Save.
Home > Fax > PC-FAX > PC-FAX for Windows > PC-FAX Overview (Windows) > Configure your PC-Fax Address Book (Windows) > Import Information to your PC-FAX Address Book (Windows) Import Information to your PC-FAX Address Book (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can import ASCII text files (*.csv), vCards (electronic business cards), or Remote Setup Dial Data into your Address Book. 1.
5. If you are importing an ASCII file, under the Divide Character section, select the Tab or Comma option to separate the data fields. 6. Click OK. 7. Browse to the folder where you want to import the data, type the file name, and then click Open.
Home > Fax > PC-FAX > PC-FAX for Windows > Send a Fax Using PC-FAX (Windows) Send a Fax Using PC-FAX (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW PC-FAX supports only black and white faxes. A black and white fax will be sent even if the original data is color and the receiving fax machine supports color faxes. 1. Create a file in any application on your computer. 2. Select the print command in your application. 3.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) Receive Faxes on Your Computer (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use Brother's PC-FAX software to receive faxes on your computer, screen them and print only those faxes you want.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) Receive Faxes Using PC-FAX Receive (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Brother's PC-FAX Receive software lets you view and store faxes on your computer. It is automatically installed when you install the Brother software and drivers and works on locally or network-connected machines. • PC-FAX Receive supports only black and white faxes.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) > Run Brother's PC-FAX Receive on Your Computer (Windows) Run Brother's PC-FAX Receive on Your Computer (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW We recommend selecting the Start PC-FAX Receive on computer startup check box so that the software runs automatically and can transfer any faxes upon computer startup. 1.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) > Run Brother's PC-FAX Receive on Your Computer (Windows) > Set Up Your Computer for PC-FAX Receiving (Windows) Set Up Your Computer for PC-FAX Receiving (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Double-click the (PC-FAX Receive) icon in your computer task tray. The PC-FAX Receive window appears. 2. Click Settings. 3.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) > Run Brother's PC-FAX Receive on Your Computer (Windows) > Add Your Brother Machine to PC-FAX Receiving (Windows) Add Your Brother Machine to PC-FAX Receiving (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW • If you installed the machine following the instructions for a network user, then the machine should already be configured for your network. 1.
Home > Fax > PC-FAX > PC-FAX for Windows > Receive Faxes on Your Computer (Windows) > Receive Faxes Using PC-FAX Receive (Windows) > View Received PC-FAX Messages (Windows) View Received PC-FAX Messages (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Receiving Status Icon Indicated Status Standby mode No unread messages Receiving messages Messages received Unread messages 1. Double-click the (PC-FAX Receive) icon in your computer task tray. The PC-FAX Receive window appears. 2.
Even after closing the window, PC-FAX Receive is active and the (PC-FAX Receive) icon will remain in your computer task tray. To close PC-FAX Receive, click the icon in the computer task tray and click Close.
Home > Fax > PC-FAX > PC-FAX for Mac PC-FAX for Mac Use Brother's PC-FAX software to send faxes directly from your Mac without printing them. This feature helps reduce your paper consumption and save time.
Home > Fax > PC-FAX > PC-FAX for Mac > Send Faxes from Your Application (Mac) Send Faxes from Your Application (Mac) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW PC-FAX supports only black and white faxes. A black and white fax will be sent even if the original data is color and the receiving fax machine supports color faxes. 1. Create a document in a Mac application. 2. From an application, such as Apple TextEdit, click the File menu, and then select Print. 3.
To send a fax to more than one number, click the Add button after entering the first fax number and type the next fax number. The destination fax numbers will be listed in the Destination Fax Numbers field. 6. Click Print to send the fax.
Home > Print Data Directly from a USB Flash Drive Print Data Directly from a USB Flash Drive You can print photos directly from digital camera media or a USB flash drive. Supported file types are PDF, JPEG, TIFF, XPS, and PRN.
Home > Print Data Directly from a USB Flash Drive > Compatible USB Flash Drives Compatible USB Flash Drives Related Models: MFC-L3750CDW/MFC-L3770CDW IMPORTANT The USB direct interface supports only USB flash drives and digital cameras that use the USB mass storage standard. Other USB devices are not supported.
Home > Print Data Directly from a USB Flash Drive > Print Data Directly from a USB Flash Drive or Digital Camera Supporting Mass Storage Print Data Directly from a USB Flash Drive or Digital Camera Supporting Mass Storage Related Models: MFC-L3750CDW/MFC-L3770CDW • Make sure your digital camera is turned on. • Your digital camera must be switched from PictBridge mode to mass storage mode.
• [Orientation] • [2-sided] • [Collate] • [Tray Use] • [Print Quality] • [PDF Option] Depending on the file type, some of these settings may not appear. 6. Press [OK]. 7. Enter the number of copies you want. 8. Press [Black Start] or [Color Start] to print the data. 9. Press . IMPORTANT DO NOT remove the USB flash drive or digital camera from the USB direct interface until the machine has finished printing.
Home > Print Data Directly from a USB Flash Drive > Create a PRN File for Direct Printing (Windows) Create a PRN File for Direct Printing (Windows) Related Models: MFC-L3750CDW/MFC-L3770CDW These instructions may vary depending on your print application and operating system. 1. Select the print command in your application. 2. Select your model, and then select the print to file option. 3. Complete your print operation. 4. Enter the required information to save the file.
Home > Network Network • Configure Network Details Using the Control Panel • Supported Basic Network Features • Network Management Software and Utilities • Additional Methods of Configuring Your Brother Machine for a Wireless Network • Advanced Network Features • Technical Information for Advanced Users 302
Home > Network > Configure Network Details Using the Control Panel Configure Network Details Using the Control Panel To configure the machine for your network, use the control panel's [Network] menu selections. • For information about the network settings you can configure using the control panel, see Related Information: Settings Tables.
Home > Network > Supported Basic Network Features Supported Basic Network Features The print server supports various features depending on the operating system. Use this table to see which network features and connections are supported by each operating system. Operating Systems Windows 7 Windows 8 Windows 10 Windows Server 2008/2008 R2/2012/2012 R2/2016 Yes macOS v10.11.6 macOS v10.12.x macOS v10.13.
Home > Network > Network Management Software and Utilities Network Management Software and Utilities Configure and change your Brother machine's network settings using a management utility.
Home > Network > Network Management Software and Utilities > Learn about Network Management Software and Utilities Learn about Network Management Software and Utilities Web Based Management Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). Type your machine's IP address into your web browser to access and change your print server settings.
Related Topics: • Change Machine Settings Using Web Based Management 307
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network Additional Methods of Configuring Your Brother Machine for a Wireless Network To connect your machine to your wireless network, we recommend using the Brother installation disc.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Before Configuring Your Brother Machine for a Wireless Network Before Configuring Your Brother Machine for a Wireless Network Before attempting to configure a wireless network, confirm the following: • If you are using an enterprise wireless network, you must know the User ID and Password.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network Configure Your Machine for a Wireless Network 1. Turn on your computer and insert the Brother installation disc into your computer. • For Windows, follow these instructions: • For Mac, click Driver Download to go to the Brother Solutions Center. Follow the on-screen instructions to install printer drivers. 2. The opening screen appears automatically.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS) Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS) If your wireless access point/router supports WPS (PBC: Push Button Configuration), you can use WPS from your machine's control panel menu to configure your wireless network settings.
You have completed the wireless network setup. To install the Full Driver & Software Package necessary for operating your machine, insert the Brother installation disc into your computer, or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) If your wireless LAN access point/router supports WPS, you can use the Personal Identification Number (PIN) Method to configure your wireless network settings.
2 Routers or access points that support WPS are marked with this symbol: >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to select the [Network] option, and then press OK. 3. Press a or b to select the [WLAN] option, and then press OK. 4. Press a or b to select the [WPS w/PIN Code] option, and then press OK. 5. When [WLAN Enable?] appears, enable the wireless network. This will start the wireless setup wizard. 6.
Click • (Start) > Devices and Printers > Add a device. Windows 8 Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings > Control Panel > Hardware and Sound > Devices and Printers > Add a device. • Windows 10 > Windows System > Control Panel. In the Hardware and Sound group, click Add a device. Click • To use a Windows 7, Windows 8, or Windows 10 computer as a Registrar, you must register it to your network in advance.
• To use a Windows 7, Windows 8, or Windows 10 computer as a Registrar, you must register it to your network in advance. For more information, see the instructions supplied with your wireless LAN access point/router. • If you use Windows 7, Windows 8, or Windows 10 as a Registrar, you can install the printer driver after the wireless configuration by following the on-screen instructions.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW Before configuring your machine, we recommend writing down your wireless network settings.
• If you are using an authentication and encryption method that requires a Network Key, enter the Network Key you wrote down in the first step. Enter the WEP key, and then press OK to apply your settings. To apply the settings, select [Yes]. To cancel, select [No]. • If your authentication method is Open System and your encryption mode is None, go to the next step. • If your WLAN access point/router supports WPS, [WPS is available] appears.
If a list of SSIDs is displayed, swipe up or down or press a or b to display the SSID to which you want to connect, and then press the SSID. 5. Press [OK]. 6. Do one of the following: • If you are using an authentication and encryption method that requires a Network Key, enter the Network Key you wrote down in the first step. When you have entered all the characters, press [OK]. • If your authentication method is Open System and your encryption mode is None, go to the next step. 7.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration.
• If you selected the [Shared Key] option, enter the WEP key, and then press OK. • If you selected the [WPA/WPA2-PSK] option, press a or b to select the Encryption Type [TKIP+AES] or [AES], and then press OK. Enter the WPA™ key, and then press OK. Your Brother machine supports the use of the first WEP key only. 12. To apply the settings, select [Yes]. To cancel, select [No]. 13. The machine attempts to connect to the wireless device you have selected.
• If you selected the [Open System] option, press the Encryption type [None] or [WEP]. If you selected the [WEP] option for Encryption type, select and enter the WEP key, and then press [OK]. • If you selected the [Shared Key] option, select and enter the WEP key, and then press [OK]. • If you selected the [WPA/WPA2-PSK] option, press the Encryption type [TKIP+AES] or [AES]. Enter the WPA™ key, and then press [OK]. • Your Brother machine supports the use of the first WEP key only. 9.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for an Enterprise Wireless Network Configure Your Machine for an Enterprise Wireless Network >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration. 1.
• If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration. Contact your network administrator about the client certificate. If you have installed more than one certificate, we recommend writing down the certificate name you want to use. • If you verify your machine using the common name of the server certificate, we recommend writing down the common name before you start configuration.
You have completed the wireless network setup. To install Full Driver & Software Package necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration. 1.
• If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration. Contact your network administrator about the client certificate. If you have installed more than one certificate, we recommend writing down the certificate name you want to use. • If you verify your machine using the common name of the server certificate, we recommend writing down the common name before you start configuration.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® Use Wi-Fi Direct® • Print or Scan from Your Mobile Device Using Wi-Fi Direct • Configure Your Wi-Fi Direct Network • I Cannot Complete the Wireless Network Setup Configuration 327
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Print or Scan from Your Mobile Device Using Wi-Fi Direct Print or Scan from Your Mobile Device Using Wi-Fi Direct Wi-Fi Direct is one of the wireless configuration methods developed by the Wi-Fi Alliance®.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network Configure Your Wi-Fi Direct Network Configure your Wi-Fi Direct network settings from your machine's control panel.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Wi-Fi Direct Network Configuration Overview Wi-Fi Direct Network Configuration Overview The following instructions offer five methods for configuring your Brother machine in a wireless network environment. Select the method you prefer for your environment: Check your mobile device for configuration. 1.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the OnePush Method Configure Your Wi-Fi Direct Network Using the One-Push Method >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network: 1. Press Menu. 2.
Related Information • Configure Your Wi-Fi Direct Network Related Topics: • Wi-Fi Direct Network Configuration Overview 332
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the OnePush Method of Wi-Fi Protected Setup™ (WPS) Configure Your Wi-Fi Direct Network Using the One-Push Method of WiFi Protected Setup™ (WPS) >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW If your mobile device supports WPS (PBC: Push Button Configuration), follow
Related Topics: • Wi-Fi Direct Network Configuration Overview 334
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN Method Configure Your Wi-Fi Direct Network Using the PIN Method >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network: 1. Press Menu. 2.
This will start the Wi-Fi Direct setup. To cancel, press . 3. Do one of the following: • When your Brother machine is the Group Owner (G/O), it will wait for a connection request from your mobile device. When [PIN Code] appears, enter the PIN displayed on your mobile device in the machine. Press [OK] to complete the setup. If the PIN is displayed on your Brother machine, enter the PIN in your mobile device.
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW If your mobile device supports the PIN Method of Wi-Fi Protected Setup™ (WPS), foll
Related Information • Configure Your Wi-Fi Direct Network Related Topics: • Wi-Fi Direct Network Configuration Overview 338
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Manually Configure Your Wi-Fi Direct Network Manually >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually. 1. Press Menu. 2.
Home > Network > Advanced Network Features Advanced Network Features • Print the Network Configuration Report • Print the WLAN Report • Synchronize Time with the SNTP Server Using Web Based Management 340
Home > Network > Advanced Network Features > Print the Network Configuration Report Print the Network Configuration Report The Network Configuration Report lists the network configuration, including the network print server settings. • Node Name: The Node Name appears on the current Network Configuration Report. The default Node Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where "xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.
Home > Network > Advanced Network Features > Print the WLAN Report Print the WLAN Report The WLAN Report reflects your machine's wireless status. If the wireless connection fails, check the error code on the printed report. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [Print Reports] option, and then press OK. 3. Press a or b to select the [WLAN Report] option, and then press OK. 4.
Home > Network > Advanced Network Features > Print the WLAN Report > Wireless LAN Report Error Codes Wireless LAN Report Error Codes If the Wireless LAN Report shows that the connection failed, check the error code on the printed report and see the corresponding instructions in the table: Error Code Problem and Recommended Solutions TS-01 The wireless setting is not activated, change the wireless setting to ON.
Error Code Problem and Recommended Solutions TS-08 Two or more WLAN access points that have WPS enabled are detected. • Confirm that only one WLAN access point/router within range has the WPS method active and try again. • Try starting again after few minutes in order to avoid effects from other access points.
Home > Network > Advanced Network Features > Synchronize Time with the SNTP Server Using Web Based Management Synchronize Time with the SNTP Server Using Web Based Management The Simple Network Time Protocol (SNTP) is used to synchronize the time used by the machine for authentication with the SNTP time server. (This is not the time displayed on the machine's LCD.) You can automatically or manually synchronize the machine's time with the Coordinated Universal Time (UTC) provided by the SNTP time server.
Home > Network > Advanced Network Features > Synchronize Time with the SNTP Server Using Web Based Management > Configure Date and Time Using Web Based Management Configure Date and Time Using Web Based Management Configure date and time to synchronize the time used by the machine with the SNTP time server. This feature is not available in some countries. 1. Start your web browser. 2.
Home > Network > Advanced Network Features > Synchronize Time with the SNTP Server Using Web Based Management > Configure the SNTP Protocol Using Web Based Management Configure the SNTP Protocol Using Web Based Management Configure the SNTP protocol to synchronize the time the machine uses for authentication with the time kept by the SNTP time server. 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Home > Network > Technical Information for Advanced Users Technical Information for Advanced Users • Reset the Network Settings to the Factory Settings 348
Home > Network > Technical Information for Advanced Users > Reset the Network Settings to the Factory Settings Reset the Network Settings to the Factory Settings You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address. • This feature restores all wired (supported models only) and wireless network settings to the factory settings.
Home > Security Security • Lock the Machine Settings • Network Security Features 350
Home > Security > Lock the Machine Settings Lock the Machine Settings Before turning on the machine's Access Lock, make a careful note of your password. If you forget the password, you must reset all passwords stored in the machine by contacting your administrator or Brother Customer Service.
Home > Security > Lock the Machine Settings > Setting Lock Overview Setting Lock Overview Use the Setting Lock feature to block unauthorized access to machine settings. When Setting Lock is set to On, you cannot access the machine settings without entering the password.
Home > Security > Lock the Machine Settings > Setting Lock Overview > Set the Setting Lock Password Set the Setting Lock Password >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [General Setup] option, and then press OK. 3. Press a or b to display the [Setting Lock] option, and then press OK. 4. Enter a four-digit number for the password. 5. Press OK. 6. When the LCD displays [Verify:], re-enter the password. 7.
Home > Security > Lock the Machine Settings > Setting Lock Overview > Change the Setting Lock Password Change the Setting Lock Password >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [General Setup] option, and then press OK. 3. Press a or b to display the [Setting Lock] option, and then press OK. 4. Press a or b to select the [Set Password] option, and then press OK. 5. Enter the current four-digit password. 6.
Home > Security > Lock the Machine Settings > Setting Lock Overview > Turn On Setting Lock Turn On Setting Lock >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [General Setup] option, and then press OK. 3. Press a or b to display the [Setting Lock] option, and then press OK. 4. Press OK when the LCD displays [On]. 5. Enter the current four-digit password. 6. Press OK. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1.
Home > Security > Network Security Features Network Security Features • Before Using Network Security Features • Secure Function Lock 3.0 • Manage Your Network Machine Securely Using SSL/TLS • Send an Email Securely • Use IEEE 802.
Home > Security > Network Security Features > Before Using Network Security Features Before Using Network Security Features Your Brother machine employs some of the latest network security and encryption protocols available today. These network features can be integrated into your overall network security plan to help protect your data and prevent unauthorized access to the machine. We recommend disabling the Telnet, FTP server and TFTP protocols. Accessing the machine using these protocols is not secure.
Home > Security > Network Security Features > Secure Function Lock 3.0 Secure Function Lock 3.0 Brother's Secure Function Lock 3.0 increases security by restricting the functions available on your Brother machine. • Before Using Secure Function Lock 3.0 • Configure Secure Function Lock 3.0 Using Web Based Management • Scan Using Secure Function Lock 3.0 • Configure Public Mode for Secure Function Lock 3.0 • Additional Secure Function Lock 3.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Before Using Secure Function Lock 3.0 Before Using Secure Function Lock 3.0 Use Secure Function Lock to configure passwords, set specific user page limits, and grant access to some or all of the functions listed here. You can configure and change the following Secure Function Lock 3.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Configure Secure Function Lock 3.0 Using Web Based Management Configure Secure Function Lock 3.0 Using Web Based Management 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: https://192.168.1.2 3. If the machine prompts you for a password, type it, and then click . 4. Click the Administrator tab. 5.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Scan Using Secure Function Lock 3.0 Scan Using Secure Function Lock 3.0 Setting Scan restrictions (for administrators) Secure Function Lock 3.0 allows an administrator to restrict which users are allowed to scan. When the Scan feature is set to Off for the public user setting, only users who have the Scan check box selected will be able to scan.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Configure Public Mode for Secure Function Lock 3.0 Configure Public Mode for Secure Function Lock 3.0 Use the Secure Function Lock screen to set up Public Mode, which limits the functions available to public users. Public users will not need to enter a password to access the features made available through Public Mode settings. Public Mode includes print jobs sent via Google Cloud Print™, Brother iPrint&Scan, and CUPS driver (Mac). 1.
Home > Security > Network Security Features > Secure Function Lock 3.0 > Additional Secure Function Lock 3.0 Features Additional Secure Function Lock 3.0 Features Configure the following features in the Secure Function Lock screen: All Counter Reset Click All Counter Reset, in the Page Counters column, to reset the page counter. Export to CSV file Click Export to CSV file, to export the current page counter including User List / Restricted Functions information as a CSV file.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/TLS Manage Your Network Machine Securely Using SSL/TLS • Introduction to SSL/TLS • Certificates and Web Based Management • Manage Your Network Machine Securely Using Web Based Management • Manage Your Network Machine Securely Using BRAdmin Professional (Windows) • Print Documents Securely Using SSL/TLS 364
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Introduction to SSL/TLS Introduction to SSL/TLS Secure Socket Layer (SSL) or Transport Layer Security (TLS) is an effective method of protecting data sent over a local or wide area network (LAN or WAN). It works by encrypting data, such as a print job, sent over a network, so anyone trying to capture it will not be able to read it.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Introduction to SSL/TLS > Brief History of SSL/TLS Brief History of SSL/TLS SSL/TLS was originally created to secure web traffic information, particularly data sent between web browsers and servers. For example, when you use Internet Explorer for Internet Banking and you see https:// and the little padlock icon in the web browser, you are using SSL.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Introduction to SSL/TLS > Benefits of Using SSL/TLS Benefits of Using SSL/TLS The primary benefit of using SSL/TLS on Brother machines is to guarantee secure printing over an IP network by restricting unauthorized users from reading data sent to the machine. SSL's key selling point is that it can be used to print confidential data securely.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management Certificates and Web Based Management You must configure a certificate to manage your networked Brother machine securely using SSL/TLS. You must use Web Based Management to configure a certificate.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Supported Security Certificate Features Supported Security Certificate Features Your Brother machine supports the use of multiple security certificates, which allows secure management, authentication, and communication with the machine.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate Create and Install a Certificate • Step by Step Guide for Creating and Installing a Certificate • Create and Install a Self-signed Certificate • Create and Install a Certificate from a Certificate Authority (CA) • Import and Export a CA Certificate 370
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Step by Step Guide for Creating and Installing a Certificate Step by Step Guide for Creating and Installing a Certificate There are two options when choosing a security certificate: use a self-signed certificate or use a certificate from a Certificate Authority (CA).
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate Create and Install a Self-signed Certificate • Create a Self-signed Certificate • Install the Self-signed Certificate for Windows users with Administrator Rights • Import and Export the Self-signed Certificate on your Brother Machine 372
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Create a Self-signed Certificate Create a Self-signed Certificate 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: https://192.168.1.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Install the Self-signed Certificate for Windows users with Administrator Rights Install the Self-signed Certificate for Windows users with Administrator Rights The following steps are for Microsoft Internet Explorer.
6. Click Install Certificate…. 7. When the Certificate Import Wizard appears, click Next. 8. Select Place all certificates in the following store, and then click Browse…. 9. Select Trusted Root Certification Authorities, and then click OK. 10. Click Next. 11. Click Finish. 12. Click Yes, if the fingerprint (thumbprint) is correct. 13. Click OK. The self-signed certificate is now installed on your computer, and SSL/TLS communication is available.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Import and Export the Self-signed Certificate on your Brother Machine Import and Export the Self-signed Certificate on your Brother Machine You can store the self-signed certificates on your Brother machine and manage them by importing and exporting.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Import the Selfsigned Certificate Import the Self-signed Certificate 1. Start your web browser. 2.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Selfsigned Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Export the Selfsigned Certificate Export the Self-signed Certificate 1. Start your web browser. 2.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) Create and Install a Certificate from a Certificate Authority (CA) If you already have a certificate from an external trusted CA, you can store the certificate and private key on the machine and manage them by importing and exporting.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Create a Certificate Signing Request (CSR) Create a Certificate Signing Request (CSR) A Certificate Signing Request (CSR) is a request sent to a Certificate Authority (CA) to authenticate the credentials contained within the certificate.
12. Click Save. • Follow your CA's policy regarding the method to send a CSR to your CA. • If you are using the Enterprise root CA of Windows Server 2008/2012/2012 R2/2016, we recommend using the Web Server for the certificate template to securely create the Client Certificate. If you are creating a Client Certificate for an IEEE 802.1x environment with EAP-TLS authentication, we recommend using User for the certificate template.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Install a Certificate on Your Brother Machine Install a Certificate on Your Brother Machine When you receive a certificate from a CA, follow the steps below to install it into the print server: Only a certificate issued with your machine's CSR can be installed onto t
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key Import and Export the Certificate and Private Key Store the certificate and private key on your machine and manage them by importing and exporting them.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key > Import a Certificate and Private Key Import a Certificate and Private Key 1. Start your web browser. 2.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key > Export the Certificate and Private Key Export the Certificate and Private Key 1. Start your web browser. 2.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA Certificate Import and Export a CA Certificate You can import, export and store CA certificates on your Brother machine.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA Certificate > Import a CA Certificate Import a CA Certificate 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: https://192.168.1.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA Certificate > Export a CA Certificate Export a CA Certificate 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: https://192.168.1.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Certificates and Web Based Management > Manage Multiple Certificates Manage Multiple Certificates The multiple certificate feature allows you to use Web Based Management to manage each certificate installed on your machine. In Web Based Management, navigate to the Certificate or CA Certificate screen to view certificate content, delete, or export your certificates.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Manage Your Network Machine Securely Using Web Based Management Manage Your Network Machine Securely Using Web Based Management To manage your network machine securely, you must use management utilities with security protocols. We recommend using the HTTPS protocol for secure management. To use this protocol, HTTPS must be enabled on your machine. • The HTTPS protocol is enabled by default.
Related Information • Manage Your Network Machine Securely Using SSL/TLS 391
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Manage Your Network Machine Securely Using BRAdmin Professional (Windows) Manage Your Network Machine Securely Using BRAdmin Professional (Windows) To use BRAdmin Professional, you must: • Use the latest version of BRAdmin Professional. Go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ TLS > Print Documents Securely Using SSL/TLS Print Documents Securely Using SSL/TLS To print documents securely with IPP protocol, use the IPPS protocol. 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: https://192.168.1.
Home > Security > Network Security Features > Send an Email Securely Send an Email Securely • Configure Email Sending Using Web Based Management • Send an Email with User Authentication • Send an Email Securely Using SSL/TLS 394
Home > Security > Network Security Features > Send an Email Securely > Configure Email Sending Using Web Based Management Configure Email Sending Using Web Based Management We recommend using Web Based Management to configure secured email sending with user authentication, or email sending using SSL/TLS. 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: https://192.168.1.2 3.
Home > Security > Network Security Features > Send an Email Securely > Send an Email with User Authentication Send an Email with User Authentication Your Brother machine supports the SMTP-AUTH method to send email via an email server that requires user authentication. This method prevents unauthorized users from accessing the email server. You can use the SMTP-AUTH method for email notification and email reports (available for certain models).
Home > Security > Network Security Features > Send an Email Securely > Send an Email Securely Using SSL/TLS Send an Email Securely Using SSL/TLS Your Brother machine supports SSL/TLS communication methods. To use email server that is using SSL/TLS communication, you must configure following settings. We recommend using Web Based Management to configure SSL/TLS. Verify Server Certificate Under SSL/TLS, if you choose SSL or TLS, the Verify Server Certificate check box will be selected automatically.
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless Network Use IEEE 802.1x Authentication for a Wired or a Wireless Network • What Is IEEE 802.1x Authentication? • Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based Management (Web Browser) • IEEE 802.
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless Network > What Is IEEE 802.1x Authentication? What Is IEEE 802.1x Authentication? IEEE 802.1x is an IEEE standard for wired and wireless networks that limits access from unauthorized network devices. Your Brother machine (supplicant) sends an authentication request to a RADIUS server (Authentication server) through your access point or HUB.
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless Network > Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based Management (Web Browser) Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based Management (Web Browser) • If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration.
• To enable IEEE 802.1x authentication for wired networks, select Enabled for Wired 802.1x status on the Wired 802.1x Authentication page. • If you are using EAP-TLS authentication, you must select the client certificate that has been installed (shown with certificate name) for verification from the Client Certificate drop-down list. • If you select EAP-FAST, PEAP, EAP-TTLS, or EAP-TLS authentication, select the verification method from the Server Certificate Verification drop-down list.
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless Network > IEEE 802.1x Authentication Methods IEEE 802.1x Authentication Methods LEAP (Wireless network) Lightweight Extensible Authentication Protocol (LEAP) is a proprietary EAP method developed by Cisco Systems, Inc., which uses a user ID and password for authentication.
Home > Security > Network Security Features > Store Print Log to Network Store Print Log to Network • Store Log to Network Overview • Configure the Store Print Log to Network Settings Using Web Based Management • Use the Store Print Log to Network's Error Detection Setting • Use Store Print Log to Network with Secure Function Lock 3.
Home > Security > Network Security Features > Store Print Log to Network > Store Log to Network Overview Store Log to Network Overview The Store Print Log to Network feature allows you to save the print log file from your Brother machine to a network server using the Common Internet File System (CIFS) protocol. You can record the ID, type of print job, job name, user name, date, time and the number of printed pages for every print job.
Home > Security > Network Security Features > Store Print Log to Network > Configure the Store Print Log to Network Settings Using Web Based Management Configure the Store Print Log to Network Settings Using Web Based Management 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: https://192.168.1.2 3. If the machine prompts you for a password, type it, and then click . 4.
You can also confirm the error status on the LCD of your machine. 9. Click Submit to display the Test Print Log to Network page. To test your settings, click Yes and then go to the next step. To skip the test, click No. Your settings will be submitted automatically. 10. The machine will test your settings. 11. If your settings are accepted, Test OK appears on the screen. If Test Error appears, check all settings, and then click Submit to display the Test page again.
Home > Security > Network Security Features > Store Print Log to Network > Use the Store Print Log to Network's Error Detection Setting Use the Store Print Log to Network's Error Detection Setting Use Error Detection Settings to determine the action that is taken when the print log cannot be stored to the server due to a network error. 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Home > Security > Network Security Features > Store Print Log to Network > Use Store Print Log to Network with Secure Function Lock 3.0 Use Store Print Log to Network with Secure Function Lock 3.0 When Secure Function Lock 3.0 is active, the names of the registered users for copy, Fax RX, Web Connect Print and USB Direct Print (if available) are recorded in the Store Print Log to Network report.
Home > Mobile/Web Connect Mobile/Web Connect • Brother Web Connect • Google Cloud Print • AirPrint • Mobile Printing for Windows • Mopria® Print Service • Brother iPrint&Scan for Mobile Devices • Near-Field Communication (NFC) 409
Home > Mobile/Web Connect > Brother Web Connect Brother Web Connect Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW • Brother Web Connect Overview • Online Services Used with Brother Web Connect • Conditions for Using Brother Web Connect • Set Up Brother Web Connect • Scan and Upload Documents Using Brother Web Connect • Download and Print Documents Using Brother Web Connect • FaxForward to Cloud or E-mail 410
Home > Mobile/Web Connect > Brother Web Connect > Brother Web Connect Overview Brother Web Connect Overview Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Certain websites provide services that allow users to upload and view images and files on the websites. Your Brother machine can scan images and upload them to these services, and also download and print images that are already uploaded to these services. 1. Printing 2. Scanning 3. Photos, images, documents and other files 4.
Home > Mobile/Web Connect > Brother Web Connect > Online Services Used with Brother Web Connect Online Services Used with Brother Web Connect Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use Brother Web Connect to access services from your Brother machine: To use Brother Web Connect, you must have an account with the online service you want to use. If you do not already have an account, use a computer to access the service's website and create an account.
Accessible Services Google Drive™ Brother Creative Center Evernote® Dropbox OneDrive Box OneNote Upload scanned images JPEG - PDF 2 DOCX XLSX PPTX TIFF XPS FaxForward to the online services JPEG (available only for certain models) TIFF - PDF 1 DOC/XLS/PPT formats are also available for downloading and printing images. 2 For upload scanned images, PDF includes Searchable PDF, Signed PDF, Secure PDF and PDF/A.
Home > Mobile/Web Connect > Brother Web Connect > Conditions for Using Brother Web Connect Conditions for Using Brother Web Connect Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW • Brother Software Installation for Using Brother Web Connect • Configure the Proxy Server Settings Using Your Brother Machine's Control Panel • Configure the Proxy Server Settings Using Web Based Management 414
Home > Mobile/Web Connect > Brother Web Connect > Conditions for Using Brother Web Connect > Brother Software Installation for Using Brother Web Connect Brother Software Installation for Using Brother Web Connect Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW The initial installation of Brother Web Connect requires a computer that has access to the Internet and has the Brother machine's software installed.
Home > Mobile/Web Connect > Brother Web Connect > Conditions for Using Brother Web Connect > Configure the Proxy Server Settings Using Your Brother Machine's Control Panel Configure the Proxy Server Settings Using Your Brother Machine's Control Panel Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If your network uses a proxy server, the following proxy server information must be configured on the machine: • Proxy server address • Port number • User Name • Password 1.
Home > Mobile/Web Connect > Brother Web Connect > Conditions for Using Brother Web Connect > Configure the Proxy Server Settings Using Web Based Management Configure the Proxy Server Settings Using Web Based Management Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If your network uses a proxy server, the following proxy server information must be configured using Web Based Management: • Proxy server address • Port number • User Name • Password We recommend Microsoft Internet Explorer 11/Micr
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect Set Up Brother Web Connect Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW • Brother Web Connect Setup Overview • Create an Account for Each Online Service Before Using Brother Web Connect • Apply for Brother Web Connect Access • Register an Account on Your Brother Machine for Brother Web Connect • Set Up Brother Web Connect for Brother CreativeCenter 418
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Brother Web Connect Setup Overview Brother Web Connect Setup Overview Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Configure the Brother Web Connect settings using the following procedure (when using Brother CreativeCenter, this procedure is not necessary): Step 1: Create an account with the service you want to use. Access the service's website using a computer and create an account.
2. Web Service Your Brother machine can now use the service.
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Create an Account for Each Online Service Before Using Brother Web Connect Create an Account for Each Online Service Before Using Brother Web Connect Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW To use Brother Web Connect to access an online service, you must have an account with that online service. If you do not already have an account, use a computer to access the service's website and create an account.
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Apply for Brother Web Connect Access Apply for Brother Web Connect Access Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW To use Brother Web Connect to access online services, you must first apply for Brother Web Connect access using a computer that has the Brother Software installed. 1.
4. Make a note of your temporary ID, as you will need it to register accounts to the machine. The temporary ID is valid for 24 hours. 5. Close the web browser. Now that you have a Brother Web Connect access ID, you must register this ID on your machine, and then use your machine to access the web service you want to use.
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Register an Account on Your Brother Machine for Brother Web Connect Register an Account on Your Brother Machine for Brother Web Connect Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You must enter your Brother Web Connect account information and configure your machine so that it can use Brother Web Connect to access the service you want.
Registration is complete and your machine can now access the service.
Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Set Up Brother Web Connect for Brother CreativeCenter Set Up Brother Web Connect for Brother CreativeCenter Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Brother Web Connect is set up to work with Brother CreativeCenter automatically. No configuration is needed to create the calendars, business cards, posters and greeting cards available at www.brother.com/creativecenter.
Home > Mobile/Web Connect > Brother Web Connect > Scan and Upload Documents Using Brother Web Connect Scan and Upload Documents Using Brother Web Connect Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Upload your scanned photos and documents directly to a web service without using a computer. • When scanning and uploading JPEG files, black and white scanning is not available.
Home > Mobile/Web Connect > Brother Web Connect > Download and Print Documents Using Brother Web Connect Download and Print Documents Using Brother Web Connect Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Documents that have been uploaded to your account can be downloaded directly to your machine and printed. Documents that other users have uploaded to their own accounts for sharing can also be downloaded to your machine and printed, as long as you have viewing privileges for those documents.
Home > Mobile/Web Connect > Brother Web Connect > Download and Print Documents Using Brother Web Connect > Download and Print Using Web Services Download and Print Using Web Services Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW For information on Brother CreativeCenter Templates, see Related Information. 1. Swipe to display the [Web] option. 2. Press [Web]. • If information regarding the Internet connection appears on the machine’s LCD, read the information and press [OK].
Home > Mobile/Web Connect > Brother Web Connect > Download and Print Documents Using Brother Web Connect > Download and Print Brother CreativeCenter Templates Download and Print Brother CreativeCenter Templates Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Brother CreativeCenter is not available in all countries. 1. Swipe to display the [Apps] option. 2. Press [Apps]. • If information regarding the Internet connection appears on the machine’s LCD, read the information and press [OK].
Home > Mobile/Web Connect > Brother Web Connect > FaxForward to Cloud or E-mail FaxForward to Cloud or E-mail Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW • Use the FaxForward to Cloud feature to automatically forward incoming faxes to your accounts with the available online services. 1 1. Web Service • Use the FaxForward to E-mail feature to automatically forward incoming faxes to an inbox as email attachments.
Home > Mobile/Web Connect > Brother Web Connect > FaxForward to Cloud or E-mail > Turn On FaxForward to Cloud or E-mail Turn On FaxForward to Cloud or E-mail Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Turn on the FaxForward feature to automatically forward incoming faxes to either an online service or an inbox as email attachments. • If you are a restricted Web Connect user due to the Secure Function Lock feature (available for certain models), you cannot upload the incoming faxes.
Home > Mobile/Web Connect > Brother Web Connect > FaxForward to Cloud or E-mail > Turn Off FaxForward to Cloud or E-mail Turn Off FaxForward to Cloud or E-mail Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Turn off FaxForward when you want to stop incoming faxes from automatically going to either an online service or an inbox as email attachments. If there are received faxes still in your machine's memory, you cannot turn off the FaxForward to Cloud feature. 1. Swipe to display the [Apps] option.
Home > Mobile/Web Connect > Google Cloud Print Google Cloud Print • Google Cloud Print Overview • Before Using Google Cloud Print • Print from Google Chrome™ or Chrome OS™ • Print from Google Drive™ for Mobile • Print from Gmail™ Webmail Service for Mobile 434
Home > Mobile/Web Connect > Google Cloud Print > Google Cloud Print Overview Google Cloud Print Overview Google Cloud Print™ is a Google service that allows you to print to a printer registered to your Google account using a network-compatible device (such as a mobile phone or computer) without installing the printer driver on the device. Printing from Android™ apps requires installing the Google Cloud Print™ app from the Google Play™ Store. 1 2 3 4 1. Print request 2. Internet 3.
Home > Mobile/Web Connect > Google Cloud Print > Before Using Google Cloud Print Before Using Google Cloud Print • Network Settings for Using Google Cloud Print • Register Your Machine with Google Cloud Print Using Google Chrome™ • Register Your Machine with Google Cloud Print Using Web Based Management 436
Home > Mobile/Web Connect > Google Cloud Print > Before Using Google Cloud Print > Network Settings for Using Google Cloud Print Network Settings for Using Google Cloud Print In order to use Google Cloud Print™, your Brother machine must be connected to a network that has access to the Internet, either through a wired or wireless connection. To connect and configure your machine correctly, see the Quick Setup Guide or related topics in this guide.
Home > Mobile/Web Connect > Google Cloud Print > Before Using Google Cloud Print > Register Your Machine with Google Cloud Print Using Google Chrome™ Register Your Machine with Google Cloud Print Using Google Chrome™ Make sure you have already created a Google Account. If you do not have an account, use a computer or mobile device to access the Google website (https://accounts.google.com/signup) and create an account. Make sure your Brother machine is idle before starting the registration process.
Home > Mobile/Web Connect > Google Cloud Print > Before Using Google Cloud Print > Register Your Machine with Google Cloud Print Using Web Based Management Register Your Machine with Google Cloud Print Using Web Based Management Make sure you have already created a Google Account. If you do not have an account, use a computer or mobile device to access the Google website (https://accounts.google.com/signup) and create an account.
Home > Mobile/Web Connect > Google Cloud Print > Print from Google Chrome™ or Chrome OS™ Print from Google Chrome™ or Chrome OS™ 1. Make sure your Brother machine is turned on. 2. Open the web page that you want to print. 3. Click the Google Chrome™ menu icon. 4. Click Print. 5. Select your machine from the printer list. 6. Change print options, if needed. 7. Click Print.
Home > Mobile/Web Connect > Google Cloud Print > Print from Google Drive™ for Mobile Print from Google Drive™ for Mobile 1. Make sure your Brother machine is turned on. 2. Access Google Drive™ from your Android™ or iOS device’s web browser. 3. Open the document that you want to print. 4. Tap the menu icon. 5. Tap Print. 6. Select your machine from the printer list. 7. Change print options, if needed. 8. Tap or Print.
Home > Mobile/Web Connect > Google Cloud Print > Print from Gmail™ Webmail Service for Mobile Print from Gmail™ Webmail Service for Mobile 1. Make sure your Brother machine is turned on. 2. Access the Gmail™ webmail service from your Android™ or iOS device’s web browser. 3. Open the email that you want to print. 4. Tap the menu icon. If Print appears beside the attachment name, you can also print the attachment. Tap Print, and then follow the instructions on your mobile device. 5. Tap Print. 6.
Home > Mobile/Web Connect > AirPrint AirPrint • AirPrint Overview • Before Using AirPrint (macOS) • Print Using AirPrint • Scan Using AirPrint (macOS) • Send a Fax Using AirPrint (macOS) 443
Home > Mobile/Web Connect > AirPrint > AirPrint Overview AirPrint Overview AirPrint is a printing solution for Apple operating systems that allows you to wirelessly print photos, email, web pages and documents from your iPad, iPhone, iPod touch and Mac computer without the need to install a driver. AirPrint also lets you send faxes directly from your Mac computer without printing them and lets you scan documents to your Mac computer.
Home > Mobile/Web Connect > AirPrint > Before Using AirPrint (macOS) Before Using AirPrint (macOS) Before printing using macOS, add your Brother machine to the printer list on your Mac computer. 1. Select System Preferences from the Apple menu. 2. Click Printers & Scanners. 3. Click the + icon below the Printers pane on the left. The Add screen appears. 4. Select your Brother machine, and then select AirPrint from the Use pop-up menu. 5. Click Add.
Home > Mobile/Web Connect > AirPrint > Print Using AirPrint Print Using AirPrint • Print from iPad, iPhone, or iPod touch • Print Using AirPrint (macOS) 446
Home > Mobile/Web Connect > AirPrint > Print Using AirPrint > Print from iPad, iPhone, or iPod touch Print from iPad, iPhone, or iPod touch The procedure used to print may vary by application. Safari is used in the example below. 1. Make sure your Brother machine is turned on. 2. Use Safari to open the page that you want to print. 3. Tap or . 4. Tap Print. 5. Make sure your Brother machine is selected. 6. If a different machine (or no printer) is selected, tap Printer.
Home > Mobile/Web Connect > AirPrint > Print Using AirPrint > Print Using AirPrint (macOS) Print Using AirPrint (macOS) The procedure used to print may vary by application. Safari is used in the example below. Before printing, make sure your Brother machine is in the printer list on your Mac computer. 1. Make sure your Brother machine is turned on. 2. On your Mac computer, use Safari to open the page that you want to print. 3. Click the File menu, and then select Print. 4.
Home > Mobile/Web Connect > AirPrint > Scan Using AirPrint (macOS) Scan Using AirPrint (macOS) Before scanning, make sure your Brother machine is in the scanner list on your Mac computer. 1. Load your document. 2. Select System Preferences from the Apple menu. 3. Click Printers & Scanners. 4. Select your Brother machine from the scanner list. 5. Click the Scan tab, and then click the Open Scanner… button. The Scanner screen appears. 6.
Home > Mobile/Web Connect > AirPrint > Send a Fax Using AirPrint (macOS) Send a Fax Using AirPrint (macOS) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Make sure your Brother machine is in the printer list on your Mac computer. Apple TextEdit is used in the example below. • AirPrint supports only black and white fax documents. 1. Make sure your Brother machine is turned on. 2. On your Mac computer, open the file that you want to send as a fax. 3. Click the File menu, and then select Print. 4.
Home > Mobile/Web Connect > Mobile Printing for Windows Mobile Printing for Windows Mobile printing for Windows is a function to print wirelessly from your Windows mobile device. You can connect to the same network that your Brother machine is connected to and print without installing the printer driver on the device. Many Windows apps support this function. 2 1 3 1. Windows mobile device (Windows 10 Mobile or later) 2. Wi-Fi® connection 3.
Home > Mobile/Web Connect > Mopria® Print Service Mopria® Print Service Mopria® Print Service is a print feature on Android™ mobile devices (Android™ version 4.4 or later) developed by the Mopria® Alliance. With this service, you can connect to the same network as your machine and print without additional setup. Many native Android™ apps support printing. 2 1 3 1. Android™ 4.4 or later 2. Wi-Fi® Connection 3.
Home > Mobile/Web Connect > Brother iPrint&Scan for Mobile Devices Brother iPrint&Scan for Mobile Devices Use Brother iPrint&Scan to print and scan from various mobile devices. • For Android™ Devices Brother iPrint&Scan allows you to use features of your Brother machine directly from your Android™ device, without using a computer. Download and install Brother iPrint&Scan from the Google Play™ Store app.
Home > Mobile/Web Connect > Near-Field Communication (NFC) Near-Field Communication (NFC) Related Models: MFC-L3770CDW Near-Field Communication (NFC) allows for simple transactions, data exchange, and wireless connections between two devices that are in close range of each other. If your Android™ device is NFC-enabled, you can print data (photos, PDF files, text files, web pages and email messages) from the device or scan photos and documents to the device by touching it to the NFC symbol on your machine.
Home > ControlCenter ControlCenter Use Brother's ControlCenter software utility to quickly access your frequently-used applications. Using ControlCenter gives you direct access to specific applications.
Home > ControlCenter > ControlCenter4 (Windows) ControlCenter4 (Windows) • Change the Operation Mode in ControlCenter4 (Windows) • Scan Using ControlCenter4 Home Mode (Windows) • Scan Using ControlCenter4 Advanced Mode (Windows) • Set Up the Brother Machine Using ControlCenter4 (Windows) • Create a Custom Tab Using ControlCenter4 Advanced Mode (Windows) 456
Home > ControlCenter > ControlCenter4 (Windows) > Change the Operation Mode in ControlCenter4 (Windows) Change the Operation Mode in ControlCenter4 (Windows) ControlCenter4 has two operation modes: Home Mode and Advanced Mode. You can change modes at any time. Home Mode Advanced Mode • Home Mode ControlCenter4 Home Mode lets you access your machine's main features easily.
ControlCenter4 Advanced Mode gives you more control over the details of your machine's features and allows you to customize one-button scan actions. To change operation mode: 1. Click the (ControlCenter4) icon in the task tray, and then select Open. 2. Click the Configuration button, and then select Mode Select. 3. The mode selection dialog box appears. Select either the Home Mode or Advanced Mode option. 4. Click OK.
Home > ControlCenter > ControlCenter4 (Windows) > Scan Using ControlCenter4 Home Mode (Windows) Scan Using ControlCenter4 Home Mode (Windows) Use ControlCenter4 Home Mode to access your machine's main features.
Home > ControlCenter > ControlCenter4 (Windows) > Scan Using ControlCenter4 Advanced Mode (Windows) Scan Using ControlCenter4 Advanced Mode (Windows) ControlCenter4 Advanced Mode gives you more control over the details of your machine's features and allows you to customize one-button scan actions.
Home > ControlCenter > ControlCenter4 (Windows) > Set Up the Brother Machine Using ControlCenter4 (Windows) Set Up the Brother Machine Using ControlCenter4 (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If Secure Function Lock is set to On, you cannot use Remote Setup. 1. Click the (ControlCenter4) icon in the task tray, and then click Open. 2. Click the Device Settings tab. 3. Click the Remote Setup button. 4. Configure the settings as needed.
OK Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, confirm that your data is correct, and then click OK. Cancel Click to exit the Remote Setup Program without uploading data to the machine. Apply Click to upload data to the machine without exiting the Remote Setup Program. 5. Click OK.
Home > ControlCenter > ControlCenter4 (Windows) > Create a Custom Tab Using ControlCenter4 Advanced Mode (Windows) Create a Custom Tab Using ControlCenter4 Advanced Mode (Windows) You can create up to three customized tabs, each including up to five customized buttons, with your preferred settings. Select Advanced Mode as the mode setting for ControlCenter4. 1. Click the (ControlCenter4) icon in the task tray, and then click Open. 2. Click the Configuration button, and then select Create custom tab.
Related Information • ControlCenter4 (Windows) 464
Home > Brother iPrint&Scan for Windows and Mac Brother iPrint&Scan for Windows and Mac • Brother iPrint&Scan Overview • Scan Using Brother iPrint&Scan (Mac) 465
Home > Brother iPrint&Scan for Windows and Mac > Brother iPrint&Scan Overview Brother iPrint&Scan Overview Use Brother iPrint&Scan for Windows and Mac to print and scan from your computer. The following screen shows an example of Brother iPrint&Scan for Windows. The actual screen may differ depending on the version of the application. • For Windows Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download the latest application.
Home > Troubleshooting Troubleshooting Use this section to resolve typical problems you may encounter when using your Brother machine. You can correct most problems yourself. IMPORTANT For technical help, you must call the country where you bought the machine. Calls must be made from within that country. Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability. If you need additional help, go to the Brother Solutions Center at support.brother.com.
Home > Troubleshooting > Error and Maintenance Messages Error and Maintenance Messages • MFC-L3770CDW If the LCD displays errors and your Android™ device supports the NFC feature, touch your device to the NFC symbol on your Brother machine to access the Brother Solutions Center and browse the latest FAQs from your device. (Your mobile telephone provider's message and data rates may apply.) Make sure the NFC settings of both your Brother machine and your Android™ device are set to On.
Error Message Cover is Open. Document Jam Cause Action pauses its current print job and goes into cooling down mode. When the machine has cooled down, it will resume printing. The top cover is not completely closed. Open and then firmly close the top cover of the machine. The fuser cover is not completely closed or paper was jammed in the back of the machine when you turned on the power. Close the fuser cover located inside the back cover of the machine. The ADF cover is not completely closed.
Error Message Cause Action Jam Tray1 The paper is jammed in the indicated paper tray. Pull the paper tray out completely and gently remove all jammed paper. Put the paper tray firmly back in the machine. Limit Exceeded The print limit set in Secure Function Lock 3.0 was reached. Ask your administrator to check your Secure Function Lock Settings. Manual Feed Manual was selected as the paper source in the printer driver, but there is no paper in the manual feed slot.
Error Message Cause Action Print Data Full The machine’s memory is full. Press Stop/Exit and delete the previously stored secure print data. Print Unable ## The machine has a mechanical problem. • Press and hold to turn off the machine, wait a few minutes, and then turn it on again. • If the problem continues, contact Brother Customer Service. Contact Brother Customer Service at: 1-877-BROTHER (1-877-276-8437) (in USA) www.brother.
Error Message Cause Action or to locate a Brother Authorized Service Center, visit: www.brother-usa.com/service Self-Diagnostic The temperature of the fuser unit • does not rise to a specified temperature within the specified time. The fuser unit is too hot. Press and hold to turn off the machine, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on.
Error Message Cause Action Cartridge Error The toner cartridge is not installed correctly. Remove the toner cartridge and drum unit assembly for the color that is indicated on the LCD. Take out the toner cartridge, and put it back into the drum unit again. Re-install the toner cartridge and drum unit assembly back in the machine. If the problem continues, contact Brother Customer Service or your local Brother dealer. Comm.Error Poor telephone line quality caused a communication error.
Error Message Cause Action Drum ! The corona wires on the drum unit must be cleaned. Clean the corona wires on the drum unit. See Related Information: Clean the Corona Wires. If the problem continues, replace the drum unit with a new one. Drum Stop It is time to replace the drum unit. Replace the drum unit. Jam 2-sided The paper is jammed underneath the paper tray or the fuser unit. Remove the paper tray or open the back cover to gently remove the jammed paper.
Error Message Cause Action No Paper The machine is out of paper, or paper is not loaded correctly in the paper tray. • Refill paper in the paper tray. Make sure the paper guides are set to the correct size. • If paper is in the tray, remove it and load it again. Make sure the paper guides are set to the correct size. • Do not overfill the paper tray. No Paper MP No Paper T1 The MP tray is out of paper, or paper is not loaded correctly in the MP tray.
Error Message Cause Action Out of Memory The machine's memory is full. If a fax-sending or copy operation is in progress, do one of the following: • Press Send Now to send the pages scanned so far. • Press Partial Print to copy the pages scanned so far. • Press Quit or and wait until the other operations that are in progress finish, and then try again. If a scan operation is in progress, do one of the following: • Split the document into multiple parts. • Reduce the Resolution.
Error Message Cause Action Scan Unable The document is too long for 2‑sided scanning. Press . For 2-sided scanning, use Letter, Legal, or Folio size paper. Other paper must be within the following size: Length: 5.8 to 14.0 in. (147.3 to 355.6 mm) Width: 4.1 in. to 8.5 in. (105 mm to 215.9 mm) Scan Unable ## The machine has a mechanical problem. • Press and hold to turn off the machine, and then turn it on again. • If the problem continues, contact Brother Customer Service.
Error Message Cause Action Toner Error One or more toner cartridges are not installed or not installed correctly. Pull out the drum units. Remove all of the toner cartridges, and then put them back into the drum units. Touchscreen Initialization Failed The touchscreen was pressed before the power on initialization was completed. Make sure nothing is touching the touchscreen. Debris may be stuck between the lower part of the touchscreen and its frame.
Home > Troubleshooting > Error and Maintenance Messages > Transfer Your Faxes or Fax Journal Report Transfer Your Faxes or Fax Journal Report Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If the LCD displays: • [Print Unable] ## • [Scan Unable] ## We recommend transferring your faxes to another fax machine or to your computer. You can also transfer the Fax Journal report to see if there are any faxes you must transfer.
Home > Troubleshooting > Error and Maintenance Messages > Transfer Your Faxes or Fax Journal Report > Transfer Faxes to Another Fax Machine Transfer Faxes to Another Fax Machine Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If you have not set up your Station ID, you cannot enter Fax Transfer mode. 1. Press [Settings] > [All Settings] > [Service] > [Data Transfer] > [Fax Transfer]. 2. Do one of the following: • If the LCD displays [No Data], there are no faxes left in the machine’s memory.
Home > Troubleshooting > Error and Maintenance Messages > Transfer Your Faxes or Fax Journal Report > Transfer Faxes to Your Computer Transfer Faxes to Your Computer Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Make sure you have installed the software and drivers on your computer, and then turn on PC-FAX Receive on the computer. Do one of the following: • (Windows 7) From the (Start) menu, select All Programs > Brother > Brother Utilities.
Home > Troubleshooting > Error and Maintenance Messages > Transfer Your Faxes or Fax Journal Report > Transfer the Fax Journal Report to Another Fax Machine Transfer the Fax Journal Report to Another Fax Machine Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If you have not set up your Station ID, you cannot enter fax transfer mode. 1. Press [Settings] > [All Settings] > [Service] > [Data Transfer] > [Report Transfer]. 2. Enter the fax number to which the Fax Journal will be forwarded. 3.
Home > Troubleshooting > Error Messages When Using the Brother Web Connect Feature Error Messages When Using the Brother Web Connect Feature Your Brother machine displays an error message if an error occurs. The most common error messages are shown in the table. You can correct most errors yourself. If, after reading this table, you still need help, the Brother Solutions Center offers the latest troubleshooting tips. Go to the Brother Solutions Center at support.brother.com.
Server Error Error Messages Cause Action Server Error 01 The machine's authentication information (needed to access the service) has expired or is invalid. Apply for Brother Web Connect access again to receive a new temporary ID, and then use the new ID to register the account to the machine. The file you are trying to upload may have one of the following problems: The file cannot be used: Authentication failed. Do the following: 1. Go to http://bwc.brother.com to get a new temporary ID. 2.
Home > Troubleshooting > Document Jams Document Jams Related Models: DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW • Document is Jammed in the Top of the ADF Unit • Document is Jammed under the Document Cover • Remove Small Scraps of Paper Jammed in the ADF 485
Home > Troubleshooting > Document Jams > Document is Jammed in the Top of the ADF Unit Document is Jammed in the Top of the ADF Unit Related Models: DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Remove any paper from the ADF that is not jammed. 2. Open the ADF cover. 3. Pull the jammed document out to the left. If the document rips or tears, be sure you remove any debris or scraps to prevent future jams. 4. Close the ADF cover. 5. Do one of the following: • (DCP-L3551CDW) Press Stop/Exit.
Home > Troubleshooting > Document Jams > Document is Jammed under the Document Cover Document is Jammed under the Document Cover Related Models: DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Remove any paper from the ADF that is not jammed. 2. Lift the document cover. 3. Pull the jammed document out to the right. If the document rips or tears, be sure you remove any debris or scraps to prevent future jams. 4. Close the document cover. 5. Do one of the following: • (DCP-L3551CDW) Press Stop/Exit.
Home > Troubleshooting > Document Jams > Remove Small Scraps of Paper Jammed in the ADF Remove Small Scraps of Paper Jammed in the ADF Related Models: DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Lift the document cover. 2. Insert a piece of stiff paper, such as cardstock, into the ADF to push any small paper scraps through. 3. Close the document cover. 4. Do one of the following: • (DCP-L3551CDW) Press Stop/Exit. • (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW) Press .
Home > Troubleshooting > Paper Jams Paper Jams Always remove the remaining paper from the paper tray and straighten the stack when you are adding new paper. This helps prevent multiple sheets of paper from feeding through the machine at one time and prevents paper jams.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the MP tray Paper is Jammed in the MP tray Related Models: MFC-L3770CDW If the machine's control panel or the Status Monitor indicates that there is a jam in the machine's MP tray, follow these steps: 1. Remove the paper from the MP tray. 2. Remove any jammed paper from in and around the MP tray. 3. Fan the paper stack, and then put it back in the MP tray. 4.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Manual Feed Slot Paper is Jammed in the Manual Feed Slot Related Models: HL-L3290CDW/DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW If the machine's control panel or the Status Monitor indicates that there is a jam in the machine's manual feed slot, follow these steps: 1. Gently remove any paper that is jammed in or around the manual feed slot. 2. Reload the paper into the manual feed slot. 3.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Paper Tray Paper is Jammed in the Paper Tray If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these steps: 1. Pull the paper tray completely out of the machine. 2. Slowly pull out the jammed paper. Pulling the jammed paper downward using both hands allows you to remove the paper more easily. 3.
5. Put the paper tray firmly back in the machine.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Output Paper Tray Paper is Jammed in the Output Paper Tray When the paper is jammed in the output paper tray, follow these steps: 1. Use both hands to open the scanner. 2. Remove the paper. 3. Push the scanner down with both hands to close it.
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Back of the Machine Paper is Jammed in the Back of the Machine If the machine's control panel or the Status Monitor indicates that there is a jam in the back (Rear) of the machine, follow these steps: 1. Leave the machine turned on but do not use it for 10 minutes to allow its internal fan to cool the extremely hot parts inside the machine. 2. Open the back cover. 3.
5. Close the fuser cover. If you print on envelopes, pull down the gray envelope levers to the envelope position again before closing the back cover. 6. Close the back cover until it locks in the closed position.
Home > Troubleshooting > Paper Jams > Paper is Jammed Inside the Machine Paper is Jammed Inside the Machine If the machine's control panel or the Status Monitor indicates that there is a jam inside the machine, follow these steps: 1. Leave the machine turned on but do not use it for 10 minutes to allow its internal fan to cool the extremely hot parts inside the machine. 2. Open the top cover until it locks in the open position. WARNING HOT SURFACE The machine's internal parts will be extremely hot.
4. Gently remove the jammed paper slowly. 5. Reinsert each toner cartridge and drum unit assembly into the machine. Make sure that you match the toner cartridge color to the same color label on the machine for all four toner cartridge and drum unit assemblies. BK C M Y 6. Close the machine's top cover.
Home > Troubleshooting > Paper Jams > Paper is Jammed underneath the Paper Tray Paper is Jammed underneath the Paper Tray If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these steps: 1. Leave the machine turned on but do not use it for 10 minutes to allow its internal fan to cool the extremely hot parts inside the machine. 2. Pull the paper tray completely out of the machine. 3. Make sure the jammed paper does not remain inside the machine. 4.
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them. 6. Use both hands to gently pull the jammed paper out of the back of the machine. 7. Close the back cover until it locks in the closed position. 8. Put the paper tray firmly back in the machine.
Home > Troubleshooting > Printing Problems Printing Problems If, after reading this table, you still need help, go to the Brother Solutions Center at support.brother.com. Difficulties Suggestions No printout Check the machine is not in Power Off mode. If the machine is in Power Off mode, press on the control panel, and then send the print data again. Check that the correct printer driver has been installed and selected.
Difficulties Suggestions The machine is not printing or has stopped printing. Cancel the print job and clear it from the machine's memory. The printout may be incomplete. Send the print data again. See Related Information:Cancel a Print Job. The headers or footers appear when the document displays on the screen but they do not show up when it is printed. There is an unprintable area on the top and bottom of the page. Adjust the top and bottom margins in your document to allow for this.
Difficulties Suggestions set to print the envelope size you are using. This is usually done in the Page Setup or Document Setup menu of your application. (For models with MP Tray)Load envelopes in the MP tray. Your application must be set to print the envelope size you are using. This is usually done in the Page Setup or Document Setup menu of your application.
Home > Troubleshooting > Improve the Print Quality Improve the Print Quality If you have a print quality problem, print a test page first. If the printout looks good, the problem is probably not the machine. Check the interface cable connections and try printing a different document. If the printout or test page printed from the machine has a quality problem, check the examples of poor print quality and follow the recommendations in the table.
Examples of poor print quality ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. Recommendation • Wipe the windows of all four LED heads with a dry, soft lint-free cloth. • Wipe the scanner glass strip with a dry lint free soft cloth.
Examples of poor print quality Recommendation • Make sure the media type setting in the printer driver matches the type of paper you are using. • Check the machine’s environment. Conditions such as high humidity and high temperatures may cause this print quality problem. • If the problem is not solved after printing a few pages, the drum may have foreign material, such as glue from a label, stuck on the drum surface. Clean the drum unit. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789.
Examples of poor print quality Recommendation • Adjust the copy density and contrast if you are copying. • Make sure Toner Save mode is off in the LCD or the printer driver. • If the print quality of the black portion is not what you expected, select the Enhance Black Printing check box in the printer driver. • Clear the Improve Gray Color check box in the printer driver. • Identify the color causing the problem and put in a new toner cartridge.
Examples of poor print quality ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. Recommendation • Check the paper type and quality. • Make sure the back cover is closed correctly. • Make sure the two gray levers inside the back cover are in the up position.
Examples of poor print quality Recommendation 1 1 • (For models with MP Tray) If creases occur with the envelope levers in the envelope position, print with the back cover open and feed one envelope at a time from the MP tray.
Home > Troubleshooting > Telephone and Fax Problems Telephone and Fax Problems Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Telephone Line or Connections Difficulties Suggestions Dialing does not work. (No Check all line cord connections. Make sure the telephone line cord is plugged into the dial tone) telephone wall jack and the LINE jack of the machine. Make sure your machine has a dial tone by pressing the Hook button in Fax mode.
Difficulties Suggestions Cannot receive a fax. Make sure the machine is in the correct Receive Mode. This is determined by the external devices and telephone subscriber services you have on the same line as the Brother machine. • If you have a dedicated fax line and want your Brother machine to automatically answer all incoming faxes, you should select Fax only mode. • If your Brother machine shares a line with an external answering machine, you should select the External TAD mode.
Difficulties Suggestions Cannot receive a fax. Contact your administrator to check your Secure Function Lock Settings. Sending Faxes Difficulties Suggestions Cannot send a fax. Check all line cord connections. Make sure the telephone line cord is plugged into the telephone wall jack and the LINE jack of the machine. Make sure your machine has a dial tone by pressing the Hook button in Fax mode.
• Set Dial Tone Detection • Set Telephone Line Compatibility for Interference and VoIP Systems Related Topics: • Voice Mail • Distinctive Ring • Set the Number of Rings Before the Machine Answers (Ring Delay) • Choose the Correct Receive Mode 513
Home > Troubleshooting > Telephone and Fax Problems > Set Dial Tone Detection Set Dial Tone Detection Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Setting the Dial Tone to [Detection] will shorten the Dial Tone detect pause. 1. Press [Settings] > [All Settings] > [Initial Setup] > [Dial Tone]. 2. Press [Detection] or [No Detection] 3. Press .
Home > Troubleshooting > Telephone and Fax Problems > Set Telephone Line Compatibility for Interference and VoIP Systems Set Telephone Line Compatibility for Interference and VoIP Systems Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Problems sending and receiving faxes due to possible interference on the telephone line may be solved by reducing the modem speed to minimize errors in fax transmission.
Home > Troubleshooting > Network Problems Network Problems • Error Messages • Use the Network Connection Repair Tool (Windows) • Where Can I Find My Brother Machine's Network Settings? • I Cannot Complete the Wireless Network Setup Configuration • My Brother Machine Cannot Print, Scan, or PC-FAX Receive over the Network • I Want to Check that My Network Devices are Working Correctly 516
Home > Troubleshooting > Network Problems > Error Messages Error Messages Your Brother machine will display an error message if an error occurs. The most common error messages are shown in the table. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW Error Messages Cause Cannot Connect The maximum number of Maximum limit of mobile devices are already connected devices connected to the Wi-Fi Direct has been reached.
Error Messages Cause Action No Device When configuring the Wi-Fi Direct network, the Brother machine cannot find your mobile device. • Make sure your machine and mobile device are in the Wi-Fi Direct mode. • Move the mobile device closer to your Brother machine. • Move your Brother machine and the mobile device to an obstruction-free area. • If you are manually configuring the Wi-Fi Direct network, make sure you have entered the correct password.
Error Messages Cause Action File Access Error, contact your administrator. In Web Based Management, you have selected the Cancel Print option in the Error Detection Setting of Store Print Log to Network. Wait for about 60 seconds until this message disappears from the LCD. No Device When configuring the Wi-Fi Direct network, the Brother machine cannot find your mobile device. • Make sure your machine and mobile device are in the Wi-Fi Direct mode.
Home > Troubleshooting > Network Problems > Use the Network Connection Repair Tool (Windows) Use the Network Connection Repair Tool (Windows) Use the Network Connection Repair Tool to fix the Brother machine's network settings. It will assign the correct IP address and Subnet Mask. • Windows 7/Windows 8/Windows 10 You must log on with Administrator rights. • Make sure the Brother machine is turned on and is connected to the same network as your computer. 1.
Home > Troubleshooting > Network Problems > Where Can I Find My Brother Machine's Network Settings? Where Can I Find My Brother Machine's Network Settings? • Print the Network Configuration Report • Change Machine Settings from Your Computer 521
Home > Troubleshooting > Network Problems > I Cannot Complete the Wireless Network Setup Configuration I Cannot Complete the Wireless Network Setup Configuration Turn your wireless router off and back on. Then try to configure the wireless settings again. If you are unable to resolve the problem, follow the instructions below: Investigate the problem using the WLAN Report. Cause Action Your security settings (SSID/ • Network Key) are not correct.
Cause Action Direct configuration, do the following: • Interface If you are using your Brother machine as a client, confirm how many devices are allowed in the current Wi-Fi Direct network, and then check how many devices are connected. For Windows If your wireless connection has been interrupted, and you have checked and tried all of the above, we recommend using the Network Connection Repair Tool.
Home > Troubleshooting > Network Problems > My Brother Machine Cannot Print, Scan, or PC-FAX Receive over the Network My Brother Machine Cannot Print, Scan, or PC-FAX Receive over the Network Cause Action Interface Your security software blocks your machine's access to the network. (The Network scanning feature does not work. ) • Wired/Wireless Windows Configure the third-party Security/Firewall Software to allow Network scanning.
Cause Action The failed print job is still in your computer's print queue. • If the failed print job is still in your computer's print queue, delete it. Wired/Wireless • Otherwise, double-click the printer icon in the following folder and cancel all documents: - Windows 7 Click - Interface (Start) > Devices and Printers. Windows 8 Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings > Control Panel.
Home > Troubleshooting > Network Problems > I Want to Check that My Network Devices are Working Correctly I Want to Check that My Network Devices are Working Correctly Check Action Interface Wired/Wireless Check that your Brother Check the following: machine, access point/ • The power cord is connected correctly and the Brother machine is router, or network hub is turned on. turned on. • The access point/router or hub is turned on and its link button is blinking.
Home > Troubleshooting > Google Cloud Print Problems Google Cloud Print Problems Difficulty Suggestions My Brother machine is not displayed in the printer list. Make sure your machine is turned on. Confirm that Google Cloud Print™ is enabled. Confirm that your machine is registered with Google Cloud Print™. If it is not registered, try to register again. I cannot print. Make sure your machine is turned on. Confirm your network settings. See Related Information.
Home > Troubleshooting > AirPrint Problems AirPrint Problems Difficulty Suggestions My Brother machine is not displayed in the printer list. Make sure your Brother machine is turned on. Confirm the network settings. Move the mobile device closer to the wireless access point/router, or to your Brother machine. I cannot print. Make sure your Brother machine is turned on. Confirm the network settings.
Home > Troubleshooting > Other Problems Other Problems Difficulties Suggestions The machine will not turn on. Adverse conditions on the power connection (such as lightning or a power surge) may have triggered the machine’s internal safety mechanisms. Unplug the power cord. Wait for ten minutes, then plug in the power cord and press to turn on the machine. If the problem is not solved, press and hold to turn off the machine.
Difficulties Suggestions Cannot make a copy. Make sure you pressed Copy and the machine is in Copy mode. Contact your administrator to check your Secure Function Lock Settings. Vertical black line appears in copies. Black vertical lines on copies are typically caused by dirt or correction fluid on the glass strip, or the corona wires are dirty. Clean the glass strip and scanner glass and the white bar and white plastic above them. Copies are blank. Make sure you are loading the document correctly.
Home > Troubleshooting > Check the Machine Information Check the Machine Information Follow these instructions to check your Brother machine's serial number and firmware version. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [Machine Info.] option, and then press OK. 3. Press a or b to select one of the following options: Option Description Serial No. Check your machine's serial number.
Home > Troubleshooting > Reset Your Brother Machine Reset Your Brother Machine >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [Initial Setup] option, and then press OK. 3. Press a or b to display the [Reset] option, and then press OK. 4. Press a or b to choose the type of reset you want to perform, and then press OK. Subdivided reset functions are not available for some models. 5.
Related Information • Troubleshooting • Reset Functions Overview 533
Home > Troubleshooting > Reset Your Brother Machine > Reset Functions Overview Reset Functions Overview The following reset functions are available: Unplug the interface cable before you choose Network Settings Reset function, All Settings Reset function or Factory Reset function. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW Subdivided reset functions are not available for some models. 1.
Unplug the interface cable before you choose Network Settings Reset function, All Settings Reset function or Factory Reset function. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Machine Reset Reset all the machine’s settings that you have changed, such as Date and Time and Ring Delay. The Address Book, fax reports, and Call history will remain. (For MFC Models) 2.
Home > Routine Maintenance Routine Maintenance • Replace Supplies • Clean the Machine • Calibrate Color Output • Correct Color Print Alignment (Color Registration) • Check the Remaining Part Life • Pack and Ship Your Brother Machine • Replace Periodic Maintenance Parts 536
Home > Routine Maintenance > Replace Supplies Replace Supplies You must replace supplies when the machine indicates that the life of the supply is over. Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability. The toner cartridge and drum unit are two separate supplies. Make sure both are installed as an assembly. The order number of supplies may vary depending on the country.
Belt Unit Waste Toner Box Related Information • Routine Maintenance • Replace the Toner Cartridge • Replace the Drum Unit • Replace the Belt Unit • Replace the Waste Toner Box Related Topics: • Error and Maintenance Messages • Supplies 538
Home > Routine Maintenance > Replace Supplies > Replace the Toner Cartridge Replace the Toner Cartridge Before starting the replacement procedure, see Related Information: Replace Supplies. 1. Make sure the machine is turned on. 2. Open the top cover until it locks in the open position. WARNING HOT SURFACE The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them. 3. Remove the toner cartridge and drum unit assembly for the color shown on the LCD.
CAUTION We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner. IMPORTANT To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration. 4. Push down the green lock lever and remove the toner cartridge from the drum unit.
5. Unpack the new toner cartridge. 6. Remove the protective cover. The shape of the toner cartridge will vary depending on your country and region. 7. Insert the new toner cartridge firmly into the drum unit until you hear it lock into place. Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 8. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. Repeat this for all the corona wires.
9. Slide the toner cartridge and drum unit assemblies into the machine. Make sure that you match the toner cartridge color to the same color label on the machine. BK C M Y 10. Close the machine's top cover. • After replacing a toner cartridge, DO NOT turn off the machine or open the top cover until the machine's display returns to Ready Mode. • The toner cartridge that comes with your Brother machine is a Starter toner cartridge.
Home > Routine Maintenance > Replace Supplies > Replace the Drum Unit Replace the Drum Unit Before starting the replacement procedure, see Related Information: Replace Supplies. >> Replace the Drum Unit >> Reset the Drum Counter (HL-L3290CDW/DCP-L3551CDW) >> Reset the Drum Counter (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW) Replace the Drum Unit 1. Make sure the machine is turned on. 2. Open the top cover until it locks in the open position.
CAUTION We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner. IMPORTANT To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration. 4. Push down the green lock lever and remove the toner cartridge from the drum unit.
5. Unpack the new drum unit. 6. Remove the protective cover. 7. Reinsert the toner cartridge firmly into the new drum unit until you hear it lock into place. Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 8. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. Repeat this for all the corona wires. Be sure to return the green tab to the Home position (a).
9. Slide the toner cartridge and drum unit assemblies into the machine. Make sure that you match the toner cartridge color to the same color label on the machine. BK C M Y 10. Close the machine's top cover. 11. Reset the drum counter by following the next section. NOTE • Drum wear and tear occurs due to use and rotation of the drum and interaction with paper, toner and other materials in the paper path.
4. Press OK to select [Drum]. 5. Press a or b to display the toner color for the drum unit you just replaced, and then press OK. 6. Press a to reset the drum counter. Reset the Drum Counter (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW) 1. Make sure the machine is turned on. 2. Press and hold for about five seconds. 3. Press [Drum]. 4. Select the toner color for the drum unit you just replaced. 5. Press [Yes].
Home > Routine Maintenance > Replace Supplies > Replace the Belt Unit Replace the Belt Unit Before starting the replacement procedure, see Related Information: Replace Supplies. >> Replace the Belt Unit >> Reset the Belt Unit Counter (HL-L3290CDW/DCP-L3551CDW) >> Reset the Belt Unit Counter (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW) Replace the Belt Unit 1. Make sure the machine is turned on. 2. Open the top cover until it locks in the open position.
CAUTION We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner. IMPORTANT To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration. 4. Hold the green handle of the belt unit and lift the belt unit up, and then pull it out without letting it touch the machine.
5. Unpack the new belt unit and insert it into the machine. NOTE To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. 6. Reinsert each toner cartridge and drum unit assembly into the machine. Make sure that you match the toner cartridge color to the same color label on the machine for all four toner cartridge and drum unit assemblies.
BK C M Y 7. Close the machine's top cover. 8. Reset the belt unit counter by following the next section. IMPORTANT • To avoid print quality issues or damage to the machine, DO NOT reset the belt unit counter unless you are replacing the belt unit. • Using non-genuine Brother supplies may affect the print quality, hardware performance, and machine reliability. Reset the Belt Unit Counter (HL-L3290CDW/DCP-L3551CDW) 1. Make sure the machine is turned on. 2. Make sure the machine's cover is closed. 3.
Home > Routine Maintenance > Replace Supplies > Replace the Waste Toner Box Replace the Waste Toner Box Before starting the replacement procedure, see Related Information: Replace Supplies. 1. Make sure the machine is turned on. 2. Open the top cover until it locks in the open position. WARNING HOT SURFACE The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them. 3. Remove all of the toner cartridge and drum unit assemblies.
CAUTION We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner. IMPORTANT To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration. 4. Hold the green handle of the belt unit and lift the belt unit up, and then pull it out without letting it touch the machine.
5. Remove the orange packing material and discard it. This step is only necessary when you are replacing the waste toner box for the first time, and is not required for the replacement waste toner box. The orange packing pieces are installed at the factory to protect your machine during shipment. 6. Hold the green handle of the waste toner box and remove the waste toner box from the machine. DO NOT reuse the waste toner box. 7.
8. Reinsert the belt unit into the machine. NOTE To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. 9. Reinsert each toner cartridge and drum unit assembly into the machine. Make sure that you match the toner cartridge color to the same color label on the machine for all four toner cartridge and drum unit assemblies.
BK C M Y 10. Close the machine's top cover.
Home > Routine Maintenance > Clean the Machine Clean the Machine Clean the outside and inside of the machine regularly with a dry, lint-free cloth. When you replace the toner cartridge or the drum unit, make sure you clean the inside of the machine. If printed pages are stained with toner, clean the inside of the machine with a dry, lint-free cloth.
Belt Unit Waste Toner Box Related Information • Routine Maintenance • Clean the Scanner • Clean the LED Heads • Clean the Touchscreen LCD • Clean the Corona Wires • Clean the Drum Unit • Clean the Paper Pick-up Rollers 558
Home > Routine Maintenance > Clean the Machine > Clean the Scanner Clean the Scanner 1. Press and hold to turn off the machine. 2. Lift the document cover (1). Clean the white plastic surface (2) and scanner glass (3) underneath it with a soft lint-free cloth moistened with water. 1 2 3 3. In the ADF unit, clean the white bar (1) and the scanner glass strip (2) underneath it with a soft lint-free cloth moistened with water. 2 1 4.
Home > Routine Maintenance > Clean the Machine > Clean the LED Heads Clean the LED Heads If there is a problem with the print quality, such as light or faded colors, white streaks, or bands that run down the page, clean the LED heads as follows: 1. Press and hold to turn off the machine. 2. Open the top cover until it locks in the open position. 3. Wipe each LED head window (1) with a dry, soft, lint-free cloth. Do not touch the windows with your fingers. 1 1 4. Close the machine's top cover. 5.
Home > Routine Maintenance > Clean the Machine > Clean the Touchscreen LCD Clean the Touchscreen LCD Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW IMPORTANT DO NOT use any type of liquid cleaners (including ethanol). 1. Press and hold to turn off the machine. 2. Clean the touchscreen with a dry, soft lint-free cloth. 3. Press to turn on the machine.
Home > Routine Maintenance > Clean the Machine > Clean the Corona Wires Clean the Corona Wires 1. Open the top cover until it locks in the open position. WARNING HOT SURFACE The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them. 2. Remove the toner cartridge and drum unit assemblies.
CAUTION We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner. IMPORTANT To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration. 3. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. Repeat this for all the corona wires.
BK C M Y 5. Close the machine's top cover.
Home > Routine Maintenance > Clean the Machine > Clean the Drum Unit Clean the Drum Unit If your printout has black or white dots or other repeating marks at 3.7 in. (94 mm) intervals, the drum may have foreign material, such as glue from a label, stuck on the drum surface. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Make sure the machine is in Ready Mode. 2. Press Menu. 3. Press a or b to select the following: a. Select [Print Reports]. Press OK. b.
CAUTION We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner. IMPORTANT To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration. 7. Push down the green lock lever and remove the toner cartridge from the drum unit.
To avoid print quality problems, DO NOT touch any surface of the drum unit except the drum unit gear. 8. Lift the drum unit frame by the handle and rotate it counterclockwise, as shown. 9. Loosen your grip so the frame drops forward, and then use your right hand to locate the drum unit gear inside the right side of the frame. To avoid print quality problems, DO NOT touch any surface of the drum unit except the drum unit gear. 10.
Use the column numbers next to the drum roller to find the mark. For example, a dot in column 2 on the Drum Dot Check Sheet would mean that there is a mark in the “2” region of the drum. 11. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off. NOTE DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids. 12. Reinsert the toner cartridge firmly into the drum unit until you hear it lock into place.
Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 13. Slide the toner cartridge and drum unit assemblies into the machine. Make sure that you match the toner cartridge color to the same color label on the machine. BK C M Y 14. Close the machine's top cover. 15. Press to turn on the machine. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1. Make sure the machine is in Ready Mode. 2. Press [Settings] > [All Settings] > [Print Reports] > [Drum Dot Print]. 3. Press [Yes].
WARNING HOT SURFACE The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them. 6. The color of printed dots on the Drum Dot Check Sheet is the color of the drum you should clean. Remove the toner cartridge and drum unit assembly that matches the color causing the problem. CAUTION We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner.
7. Push down the green lock lever and remove the toner cartridge from the drum unit. To avoid print quality problems, DO NOT touch any surface of the drum unit except the drum unit gear. 8. Lift the drum unit frame by the handle and rotate it counterclockwise, as shown. 9. Loosen your grip so the frame drops forward, and then use your right hand to locate the drum unit gear inside the right side of the frame.
To avoid print quality problems, DO NOT touch any surface of the drum unit except the drum unit gear. 10. Tilt your left hand up to lift the frame so the numbered grid is visible, as shown. Use your right hand to rotate the drum while you look for marks or debris on the drum surface. Use the column numbers next to the drum roller to find the mark. For example, a dot in column 2 on the Drum Dot Check Sheet would mean that there is a mark in the “2” region of the drum. 11.
NOTE DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids. 12. Reinsert the toner cartridge firmly into the drum unit until you hear it lock into place. Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 13. Slide the toner cartridge and drum unit assemblies into the machine. Make sure that you match the toner cartridge color to the same color label on the machine. BK C M Y 14. Close the machine's top cover. 15.
Home > Routine Maintenance > Clean the Machine > Clean the Paper Pick-up Rollers Clean the Paper Pick-up Rollers Cleaning the paper pick-up rollers periodically may prevent paper jams by ensuring that paper feeds correctly. If you have paper feed problems, clean the pick-up rollers as follows: 1. Press and hold to turn off the machine. 2. Pull the paper tray completely out of the machine. 3. If paper is loaded or something is stuck inside in the paper tray, remove it. 4.
Home > Routine Maintenance > Calibrate Color Output Calibrate Color Output The output density for each color may vary depending on the machine’s environment, including factors like temperature and humidity. Calibrating your machine helps improve the output color density. If you are using the Mac printer driver, the printer driver automatically retrieves the calibration data. To retrieve the data manually, you must perform the calibration using Brother's Status Monitor.
Home > Routine Maintenance > Calibrate Color Output > Reset the Machine's Calibration Settings Reset the Machine's Calibration Settings If the output color differs from what you see on your monitor, try resetting your machine's calibration parameters. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to select the following: a. Select [Printer]. Press OK. b. Select [Clr Correction]. Press OK. c. Select [Calibration]. Press OK. d.
Home > Routine Maintenance > Correct Color Print Alignment (Color Registration) Correct Color Print Alignment (Color Registration) If solid areas of color or images have cyan, magenta or yellow fringes, use the Color Registration function. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to select the following: a. Select [Printer]. Press OK. b. Select [Clr Correction]. Press OK. c. Select [Registration]. Press OK. 3.
Home > Routine Maintenance > Check the Remaining Part Life Check the Remaining Part Life >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to select the following: a. Select [Machine Info.]. Press OK. b. Select [Parts Life]. Press OK. 3. Press a or b to select the machine part you want to check, and then press OK. The LCD displays the approximate remaining part life. 4. Press Stop/Exit. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1.
Home > Routine Maintenance > Pack and Ship Your Brother Machine Pack and Ship Your Brother Machine WARNING • To prevent possible injuries, at least two people should lift the product by holding it at the front and back. • When you move the machine, carry the machine as shown in the illustration. • If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid any damage during transit. The machine should be adequately insured with the carrier.
5. Close the carton and tape it shut.
Home > Routine Maintenance > Replace Periodic Maintenance Parts Replace Periodic Maintenance Parts Replace the following parts regularly to maintain print quality. The parts listed below must be replaced after printing approximately 50,000 pages 1 for the Fuser Unit, PF Kit for the Paper Tray, and PF Kit MP. Contact Brother Customer Service or a Brother Authorized Service Center when the following message appears on the LCD: LCD Message Description Replace Fuser 2 Replace the Fuser Unit.
Home > Machine Settings Machine Settings Customize settings and features, create shortcuts, and work with options displayed on the machine's LCD to make your Brother machine a more efficient work tool.
Home > Machine Settings > Change Machine Settings from the Control Panel Change Machine Settings from the Control Panel • In the Event of Power Failure (Memory Storage) • General Settings • Save Your Favorite Settings as a Shortcut • Print Reports • Settings and Features Tables 583
Home > Machine Settings > Change Machine Settings from the Control Panel > In the Event of Power Failure (Memory Storage) In the Event of Power Failure (Memory Storage) Your menu settings are stored permanently, and in the event of a power failure will not be lost.Temporary settings (for example, Contrast, Overseas Mode) will be lost. • During a power failure, the machine will retain the date and time and programmed fax timer jobs (for example: Delayed Fax) for approximately 60 hours.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings General Settings • Adjust the Machine's Volume • Change for Daylight Saving Time Automatically • Set Sleep Mode Countdown • About Deep Sleep Mode • Set Auto Power Off Mode • Set the Date and Time • Set the Time Zone • Adjust the LCD Backlight Brightness • Change How Long the LCD Backlight Stays On • Set Your Station ID • Set Tone or Pulse Dialing Mode (For Canada) • Reduce Toner Consumption • Add a Prefix to Every F
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust the Machine's Volume Adjust the Machine's Volume >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to select the following: a. Select [General Setup]. Press OK. b. Select [Beep]. Press OK. 3. Press a or b to display the [High], [Med], [Low], or [Off] option, and then press OK. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change for Daylight Saving Time Automatically Change for Daylight Saving Time Automatically You can program the machine to change automatically for Daylight Saving Time. It will reset itself forward one hour in the spring, and back one hour in the fall. Make sure you have set the correct date and time in the Date & Time setting. This feature is available only in some countries.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Sleep Mode Countdown Set Sleep Mode Countdown The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or a fax. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > About Deep Sleep Mode About Deep Sleep Mode If the machine is in Sleep mode and does not receive any jobs for certain length of time, the machine will automatically enter Deep Sleep mode. The length of time is based on your specific model and settings. Deep Sleep mode uses less power than Sleep mode.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Auto Power Off Mode Set Auto Power Off Mode If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is connected to a network or a telephone line , or has secure print data in the memory(Available only for certain models).
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the Date and Time Set the Date and Time >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to select the following: a. Select [Initial Setup]. Press OK. b. Select [Date&Time]. Press OK. c. Select [Date&Time]. Press OK. 3. Press a or b to set the last two digits of the year. Press OK. Repeat these steps for setting the month and day. 4.
Related Information • General Settings 592
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the Time Zone Set the Time Zone Set the time zone for your location on the machine. For example, the time zone for Eastern Time in the USA and Canada is UTC-05:00. Pacific Time in the USA and Canada is UTC-08:00.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust the LCD Backlight Brightness Adjust the LCD Backlight Brightness Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If you are having difficulty reading the LCD, changing the brightness setting may help. 1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] > [Backlight]. 2. Press the [Light], [Med] or [Dark] option. 3. Press .
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change How Long the LCD Backlight Stays On Change How Long the LCD Backlight Stays On Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Set how long the LCD backlight stays on. 1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] > [Dim Timer]. 2. Press the option you want: • [10Secs] • [30Secs] • [1Min] • [2Mins] • [3Mins] • [5Mins] 3. Press .
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Your Station ID Set Your Station ID Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Set the machine to print your Station ID and the fax's date and time at the top of each fax you send. 1. Press [Settings] > [All Settings] > [Initial Setup] > [Station ID] > [Fax]. 2. Enter your fax number (up to 20 digits) using the LCD, and then press [OK]. 3. Press [Tel]. 4.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Tone or Pulse Dialing Mode (For Canada) Set Tone or Pulse Dialing Mode (For Canada) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Your Brother machine is set for a Tone dialing service. If you have a Pulse dialing (rotary) service, you must change the dialing mode. This feature is not available in some countries. 1. Press [Settings] > [All Settings] > [Initial Setup] > [Tone/Pulse]. 2.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Reduce Toner Consumption Reduce Toner Consumption Using the Toner Save feature may reduce toner consumption. When Toner Save is set to on, the print on your documents appears lighter. We DO NOT recommend using the Toner Save feature for printing photo or grayscale images. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Add a Prefix to Every Fax Number Add a Prefix to Every Fax Number Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW The Dial Prefix setting will automatically dial a predefined number before every fax number you dial. For example: If your telephone system requires a 9 to dial an outside number, use this setting to automatically dial 9 for every fax you send.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Prevent Dialing a Wrong Number (Dial Restriction) Prevent Dialing a Wrong Number (Dial Restriction) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW This feature prevents users from sending a fax or call to the wrong number by mistake. You can set the machine to restrict dialing when you use the dial pad, Address Book and Shortcuts. 1. Press [Settings] > [All Settings] > [Fax] > [Dial Restriction]. 2.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Reduce Printing Noise Reduce Printing Noise The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower. The factory setting is off. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [General Setup] option, and then press OK. 3.
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change the Language on the LCD Change the Language on the LCD Change the LCD language if needed. This feature is not available in some countries. >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [Initial Setup] option, and then press OK. 3. Press a or b to display the [Local Language] option, and then press OK. 4.
Home > Machine Settings > Change Machine Settings from the Control Panel > Save Your Favorite Settings as a Shortcut Save Your Favorite Settings as a Shortcut Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW • Add Shortcuts • Change or Delete Shortcuts 603
Home > Machine Settings > Change Machine Settings from the Control Panel > Save Your Favorite Settings as a Shortcut > Add Shortcuts Add Shortcuts Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You can add the Fax, Copy, Scan, Web Connect and Apps settings you use most frequently by saving them as your Shortcuts. Later you can press the Shortcut to apply these settings instead of manually re-entering them. Some Shortcut menus are not available depending on your model.
Home > Machine Settings > Change Machine Settings from the Control Panel > Save Your Favorite Settings as a Shortcut > Change or Delete Shortcuts Change or Delete Shortcuts Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW You cannot change a Web Connect Shortcut or Apps Shortcut. If you need to change them, delete them, and then add a new Shortcut. 1. Press [Shortcuts]. (If [Shortcuts] is displayed.) 2. Press a tab to display the Shortcut you want to change. 3.
Home > Machine Settings > Change Machine Settings from the Control Panel > Print Reports Print Reports • Reports • Print a Report 606
Home > Machine Settings > Change Machine Settings from the Control Panel > Print Reports > Reports Reports The following reports are available: Transmission (MFC models) The Transmission report prints a Transmission Verification Report of your last transmission. Address Book (MFC models) The Address Book report prints an alphabetical list of names and numbers stored in the Address Book memory.
Home > Machine Settings > Change Machine Settings from the Control Panel > Print Reports > Print a Report Print a Report >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW 1. Press Menu. 2. Press a or b to display the [Print Reports] option, and then press OK. 3. Press a or b to display the report you want to print, and then press OK. 4. Press Black Start or Color Start. 5. Press Stop/Exit. MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW 1.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables Settings and Features Tables The Settings tables will help you understand the menu selections and options that are found in the machine’s programs.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (HL-L3290CDW/DCP-L3551CDW) Settings Tables (HL-L3290CDW/DCP-L3551CDW) Related Models: HL-L3290CDW/DCP-L3551CDW [General Setup] Level 1 Level 2 Descriptions Tray Setting Paper Type Set the type of paper in the paper tray. Paper Size Set the size of paper in the paper tray.
[Printer] Level 1 Level 2 Level 3 Descriptions Emulation - - Set the printer emulation mode. Quality - - Select the print quality. Print Options Font List HP LaserJet Print a list of the machine’s internal fonts. BR-Script 3 Test Print - Print a test page. 2-sided Print - Turn 2-sided printing off or on and select flip on long edge or short edge. Single Image - For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time.
Level 1 Level 2 Level 3 Level 4 Wired LAN TCP/IP WINS Server Primary Descriptions Specify the IP address of the primary WINS server. Secondary Specify the IP address of the secondary WINS server. DNS Server Primary Specify the IP address of the primary DNS server. Secondary Specify the IP address of the secondary DNS server. WLAN APIPA - Set the machine to allocate the IP address from the link-local address range automatically. IPv6 - Turn the IPv6 protocol on or off.
Level 1 Level 2 Level 3 Level 4 Descriptions WLAN WLAN Status Speed - View the current wireless network speed. SSID - View the current SSID. Comm. Mode - View the current Communication mode. - - View the machine's MAC address. Set to Default - - Restore the wireless network settings to the factory settings. WLAN Enable - - Turn the WLAN on or off manually. Wi-Fi Direct Push Button - - Configure your Wi-Fi Direct network settings using the one-button push method.
Level 1 Level 2 Level 3 Level 4 WLAN TCP/IP DNS Server Secondary Specify the IP address of the secondary DNS server. APIPA - Set the machine to allocate the IP address from the link-local address range automatically. IPv6 - Turn the IPv6 protocol on or off. - - Configure your wireless network settings manually. WLAN Assistant - - Configure your wireless network settings using the Brother installation disc.
[Print Reports] Level 1 Descriptions User Settings Print a list of your settings. Print Settings Print a list of your Printer settings. Network Config Print a list of your Network settings. PrintFileList Print a list of data saved in the machine's memory. Drum Dot Print Print the Drum Dot Check Sheet. WLAN Report Print the wireless LAN connection results. [Machine Info.] Level 1 Level 2 Descriptions Serial No. - Display the machine's serial number.
Level 1 Level 2 Descriptions Local Language - Change your LCD language.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW) Settings Tables (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW [Settings] Level 1 Toner Level 2 Level 3 Descriptions Date & Time - Access the Date and Time setting menus. Toner Life - View the approximate remaining toner life for each color. Test Print - Print a test page.
Level 3 Level 4 Level 5 Descriptions Tray Setting Tray Use: Print - Select the tray to be used for Print. Volume Ring - Adjust the ring volume. Beep - Adjust the beeper volume. Speaker - Adjust the speaker volume. Backlight - Adjust the brightness of the LCD backlight. Dim Timer - Set how long the LCD backlight stays on after you go back to your Main Home screen. - Set the Main Home screen. Copy Screen - Set the default Copy screen. Scan Screen - Set the default Scan screen.
[All Settings] > [Fax] Level 3 Level 4 Level 5 Descriptions Setup Receive Receive Mode - Select the Receive Mode that best suits your needs. Ring Delay - Set the number of rings before the machine answers in Fax or Fax/Tel mode. F/T Ring Time - Set the length of the pseudo/double-ring time in Fax/Tel mode. Fax Preview - View received faxes on the LCD. Easy Receive - Receive fax messages automatically when you answer a call and hear fax tones.
Level 3 Level 4 Level 5 Descriptions - Set the machine to restrict dialing when using the dial pad. Address Book - Set the machine to restrict the dialing when using the Address Book. Shortcuts - Set the machine to restrict the dialing when using a Shortcut. Remaining Jobs - - Check which scheduled jobs are in the machine's memory and cancel selected jobs.
Level 3 Level 4 Level 5 Descriptions Color Correction Color Settings Brightness Adjust the brightness. Contrast Adjust the contrast. Red Adjust the red color. Green Adjust the green color. Blue Adjust the blue color. [All Settings] > [Network] Level 3 Level 4 Level 5 Level 6 Descriptions Wired LAN TCP/IP BOOT Method IP Boot Tries Select the Boot method that best suits your needs. IP Address - Enter the IP address. Subnet Mask - Enter the Subnet mask.
Level 3 Level 4 WLAN TCP/IP Level 5 Level 6 (up to 32 characters) WINS Configuration - Select the WINS configuration mode. WINS Server Primary Specify the IP address of the primary WINS server. Secondary Specify the IP address of the secondary WINS server. Primary Specify the IP address of the primary DNS server. Secondary Specify the IP address of the secondary DNS server. APIPA - Set the machine to allocate the IP address from the linklocal address range automatically.
Level 3 Level 4 Level 5 Level 6 Descriptions Wi-Fi Direct Group Owner - - Set your machine as the Group Owner. Device Information Device Name - View your machine's device name. SSID - View the Group Owner's SSID. When the machine is not connected, the LCD displays Not Connected. Status Information IP Address - View your machine's current IP Address. Status - View the current Wi-Fi Direct network status. Signal - View the current Wi-Fi Direct network signal strength.
[All Settings] > [Machine Info.] Level 3 Level 4 Level 5 Descriptions Serial No. - - Check your machine's serial number. Firmware Version Main Version - Check your machine's firmware version. Sub1 Version - Firmware Update - - Update your machine to the latest firmware. Firmware Auto Check - - View firmware information on the Main Home screen. Page Counter Total Color Check the total number of pages the machine has printed.
Level 3 Level 4 Descriptions Dial Tone - Shorten the dial tone detect pause. Dial Prefix - Set a prefix number to be added before the fax number every time you dial. Compatibility - Adjust the equalization for transmission difficulties. (Available only for some countries) VoIP service providers offer fax support using various standards. If you regularly experience fax transmission errors, select Basic (for VoIP). Reset Machine Reset Restore the machine settings that you have changed.
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Feature Tables (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW) Feature Tables (MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW [Toner] Level 3 Level 4 Descriptions Toner Life - View the approximate remaining toner life for each color. Test Print - Print a test page. Calibration Calibrate Initiate color calibration to check and correct colors.
Level 3 Level 4 Level 5 Level 6 Descriptions Address Book Edit Add New Address Name Store Address Book numbers, set up Group numbers for Broadcasting, change and delete Address Book numbers. Setup Groups Name Change (Select Address Book) Delete (Select Address Book) Call History Address Add/ Delete (Select Address Book) Apply - Start sending a fax using the Address Book. Redial - - Redial the last number you dialed.
[Fax] (When Fax Preview is On) Level 3 Level 4 Level 5 Descriptions Sending Faxes Redial / Pause - Received Faxes Redial the last number called. When you are entering a fax or telephone number on the control panel, Redial changes to Pause on the LCD. Press Pause when you need a delay while dialing numbers, such as access codes and credit card numbers. You can also store a pause when you set up addresses.
Level 3 Level 4 > (more Copy options) Normal Level 5 Descriptions Save as Shortcut Set the preset copy settings of Normal. > (more Copy options) Options 2in1(ID) Black Start Set the preset copy settings of 2in1(ID). Color Start ID Save as Shortcut > (more Copy options) Options 2in1 Black Start Set the preset copy settings of 2in1. Color Start ID Save as Shortcut > (more Copy options) Options 2sided(1⇒2) Black Start Set the preset copy settings of 2-sided(1⇒2).
Level 3 Level 4 Level 5 Descriptions Options Tray Use - Select the tray that will be used. 2-sided Copy Layout Turn off or turn on 2-sided copying and select flip on long edge or flip on short edge. 2-sided Copy Page Layout - Select a page layout option when you make 2-sided N in 1 copies from a 2-sided document. Quality - Select the Copy resolution for your document type. Contrast - Adjust the contrast. Stack/Sort - Select to stack or sort multiple copies.
Level 3 Level 4 Level 5 Level 6 Descriptions to USB (MFC-L3750CDW/ MFC-L3770CDW) Start - - Scan documents to a USB flash drive. to PC to File Other Scan to Actions - (Select USB or PC) Options Scan documents and save them to a folder on your computer. Save as Shortcut Start to OCR Other Scan to Actions - (Select USB or PC) Options Convert your scanned document to an editable text file.
Level 3 Level 4 computer's Network explorer.) Level 5 Level 6 Descriptions Scan for E- mail - Scan data using the Web Service protocol. Scan for Fax - - Scan for Print - - [Shortcuts] Level 1 Level 2 Level 3 Descriptions Edit/ Delete (Select Shortcut) Rename Change the shortcut name. Edit Change the shortcut settings. Delete Delete the shortcut. Copy - Select the settings you want. Fax - Select the settings you want.
[Web] Level 1 Descriptions Web Connect the Brother machine to an Internet service. [Apps] Level 1 Descriptions Apps Connect the Brother machine to the Brother Apps service. [USB] (MFC-L3750CDW/MFC-L3770CDW) Level 1 Level 2 Descriptions USB Scan documents to a USB flash drive. Scan to USB Direct Print Print the data directly from the USB flash drive.
Home > Machine Settings > Change Machine Settings from Your Computer Change Machine Settings from Your Computer • Change Machine Settings Using Web Based Management • Change the Machine Settings Using Remote Setup • Where Can I Find My Brother Machine's Network Settings? • Network Management Software and Utilities 634
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management Change Machine Settings Using Web Based Management Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS).
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > What is Web Based Management? What is Web Based Management? Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). Type your machine's IP address into your web browser to access and change your print server settings.
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > Access Web Based Management Access Web Based Management • We recommend using the HTTPS security protocol when configuring settings using Web Based Management. • When you use HTTPS for Web Based Management configuration, your browser will display a warning dialog box. To avoid displaying the warning dialog box, you can install a self-signed certificate to use SSL/TLS communication.
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > Set or Change a Login Password for Web Based Management Set or Change a Login Password for Web Based Management We recommend changing the default login password to prevent unauthorized access to Web Based Management. 1. Start your web browser. 2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup Change the Machine Settings Using Remote Setup Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW The Remote Setup program lets you configure many of your Brother machine's settings from your computer. When you start Remote Setup, the settings on your Brother machine will be downloaded to your computer and displayed on your screen.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Windows) Remote Setup (Windows) • Set Up the Brother Machine from Your Computer (Windows) • Set Up the Brother Machine Using ControlCenter4 (Windows) • Set Up Your Machine's Address Book Using ControlCenter4 (Windows) 640
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Windows) > Set Up the Brother Machine from Your Computer (Windows) Set Up the Brother Machine from Your Computer (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If Secure Function Lock is set to On, you cannot use Remote Setup. 1. Do one of the following: • Windows 7 Click (Start) > All Programs > Brother > Brother Utilities.
Click Export to save your address book or all settings for your machine. Import Click to import a file and read its settings. Print Click to print the selected items on the machine. You cannot print the data until it is uploaded to the machine. Click Apply to upload the new data to the machine, and then click Print. OK Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, confirm that your data is correct, and then click OK.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Windows) > Set Up the Brother Machine Using ControlCenter4 (Windows) Set Up the Brother Machine Using ControlCenter4 (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW If Secure Function Lock is set to On, you cannot use Remote Setup. 1. Click the (ControlCenter4) icon in the task tray, and then click Open. 2. Click the Device Settings tab. 3.
OK Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, confirm that your data is correct, and then click OK. Cancel Click to exit the Remote Setup Program without uploading data to the machine. Apply Click to upload data to the machine without exiting the Remote Setup Program. 5. Click OK.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Windows) > Set Up Your Machine's Address Book Using ControlCenter4 (Windows) Set Up Your Machine's Address Book Using ControlCenter4 (Windows) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use Remote Setup through CC4 to add or change Address Book numbers on your computer. If Secure Function Lock is set to On, you cannot use Remote Setup. 1.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Mac) Remote Setup (Mac) • Set Up the Brother Machine with a USB Cable Connection (Mac) • Set Up Your Machine's Address Book with a USB Cable Connection (Mac) 646
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Mac) > Set Up the Brother Machine with a USB Cable Connection (Mac) Set Up the Brother Machine with a USB Cable Connection (Mac) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use Remote Setup to set up your Brother machine with a USB cable connection. To use Remote Setup, go to your model's Downloads page on the Brother Solutions Center at support.brother.
Print Click to print the selected items on the machine. You cannot print the data until it is uploaded to the machine. Click Apply to upload the new data to the machine, and then click Print. OK Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, enter the correct data again, and then click OK. Cancel Click to exit the Remote Setup Program without uploading data to the machine.
Home > Machine Settings > Change Machine Settings from Your Computer > Change the Machine Settings Using Remote Setup > Remote Setup (Mac) > Set Up Your Machine's Address Book with a USB Cable Connection (Mac) Set Up Your Machine's Address Book with a USB Cable Connection (Mac) Related Models: MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW Use Remote Setup to add or change Address Book numbers on your computer with a USB cable connection.
Home > Appendix Appendix • Specifications • How to Enter Text on Your Brother Machine • Supplies • Important Information About Toner Cartridge Life • Brother Numbers 650
Home > Appendix > Specifications Specifications >> General Specifications >> Document Size Specification >> Print Media Specifications >> Fax Specifications >> Copy Specification >> Scanner Specifications >> Printer Specifications >> Interface Specifications >> Direct Print Feature Specifications >> Supported Protocols and Security Features >> Computer Requirements Specifications General Specifications Printer Type • LED Print Method • Electrophotographic LED Printer • 512 MB • HL-L3290CDW/DCP-L3
Power Consumption • (Average) MFC-L3750CDW Approximately 260 W at 77°F (25°C) • MFC-L3770CDW Approximately 260 W at 77°F (25°C) • Copying 2 HL-L3290CDW Approximately 430 W at 77°F (25°C) • DCP-L3551CDW - • MFC-L3710CW Approximately 400 W at 77°F (25°C) • MFC-L3750CDW Approximately 430 W at 77°F (25°C) • MFC-L3770CDW Approximately 430 W at 77°F (25°C) Copying (Quiet Mode) • HL-L3290CDW Approximately 260 W at 77°F (25°C) 2 • DCP-L3551CDW - • MFC-L3710CW Approximately 280 W at 77°F (25°
Power Consumption • (Average) MFC-L3750CDW Approximately 1.2 W • MFC-L3770CDW Approximately 1.2 W Power Off 2 3 4 • HL-L3290CDW Approximately 0.02 W • DCP-L3551CDW - • MFC-L3710CW Approximately 0.02 W • MFC-L3750CDW Approximately 0.02 W • MFC-L3770CDW Approximately 0.02 W Dimensions Unit: in. (mm) (Typical outline view) • (HL-L3290CDW) HL-L3290CDW * : 16.1 (410) ** : 14.5 (368) *** : 18.7 (475) • DCP-L3551CDW/MFC-L3710CW/MFC-L3750CDW * : 16.1 (410) ** : 16.3 (414) *** : 18.
Noise Level Sound Pressure Printing • HL-L3290CDW/MFC-L3750CDW/MFC-L3770CDW LpAm = 47 dB (A) • DCP-L3551CDW/MFC-L3710CW LpAm = 45 dB (A) Printing • LpAm = 43 dB (A) Ready • Default: Inaudible 5 Printing Monochrome (Quiet Mode) Sound Power • DCP-L3551CDW/MFC-L3710CW LWAd = 5.86 B (A) • HL-L3290CDW/MFC-L3750CDW/MFC-L3770CDW LWAd = 6.11 B (A) Color • DCP-L3551CDW/MFC-L3710CW LWAd = 5.92 B (A) • HL-L3290CDW/MFC-L3750CDW/MFC-L3770CDW LWAd = 6.
Print Media Specifications Paper Input Paper Tray Paper Type • Plain Paper, Thin Paper, Thick Paper, Recycled Paper Paper Size • A4, Letter, A5, A5 (Long Edge), A6, Executive, Legal, Folio, Mexico Legal, India Legal Paper Weight • 16 to 43 lb (60 to 163 g/m²) (Standard) Multi-Purpose Tray (MP tray) (MFC-L3770CDW) Maximum • Paper Capacity Up to 250 sheets of 20 lb (80 g/m2) Plain Paper Paper Type • Plain Paper, Thin Paper, Thick Paper, Recycled Paper, Bond, Label, Envelope, Env. Thin, Env.
Fax Specifications NOTE This feature is available for MFC models. Compatibility • ITU-T Super Group 3 Coding System • MH / MR / MMR / JBIG Modem Speed • 33,600 bps (with Automatic Fallback) 2-sided Print Receiving • MFC-L3750CDW/MFC-L3770CDW Yes Automatic 2-sided Sending • MFC-L3770CDW Yes (from ADF) Scanning Width • Maximum 8.19 in. (208 mm) Printing Width • Maximum 8.17 in. (207.
Less than 16 seconds at 73.4°F (23°C) / 115 V First Copy Out Time 1 • DCP-L3551CDW/MFC-L3710CW Less than 17.5 seconds at 73.4°F (23°C) / 115 V 1 From Ready Mode and standard tray Scanner Specifications Color / Black • Yes / Yes TWAIN Compliant • Yes (Windows 7 / Windows 8 / Windows 8.1 / Windows 10) (macOS v10.11.6, v10.12.x, v10.13.x) WIA Compliant • Yes (Windows 7 / Windows 8 / Windows 8.
Print Speed 1 2 2-sided Print Up to 6 sides/minute (Up to 3 sheets/minute) (Letter or A4 size) • HL-L3290CDW/MFC-L3750CDW/MFC-L3770CDW Up to 8 sides/minute (Up to 4 sheets/minute) (Letter or A4 size) Color • DCP-L3551CDW Up to 6 sides/minute (Up to 3 sheets/minute) (Letter or A4 size) • HL-L3290CDW/MFC-L3750CDW/MFC-L3770CDW Up to 8 sides/minute (Up to 4 sheets/minute) (Letter or A4 size) Monochrome First Print Time 3 • HL-L3290CDW/MFC-L3750CDW/MFC-L3770CDW Less than 14 seconds at 73.
Wireless LAN IEEE 802.11b/g/n (Infrastructure Mode), IEEE 802.
Windows Server 2016 Mac macOS v10.11.6 Operating macOS v10.12.x System macOS v10.13.x Printing PC-Fax (Send) 4 Intel® Processor 80 MB 400 MB Scanning 1 Third party USB ports are not supported. 2 For WIA, 1200x1200 resolution. Brother Scanner Utility enables resolutions up to 19200 x 19200 dpi. 3 PaperPort™ 14SE supports Windows 7 SP1, Windows8, Windows 8.1 and Windows 10. 4 PC-Fax supports black and white only.
Home > Appendix > How to Enter Text on Your Brother Machine How to Enter Text on Your Brother Machine >> HL-L3290CDW/DCP-L3551CDW >> MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW HL-L3290CDW/DCP-L3551CDW When text is required, enter characters on the machine. The characters that are available may differ depending on the operation you perform. • Hold down or repeatedly press a or b to select a character from this list: 0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ(space)!"#$%&'()*+,-./:;<=>? @[\]
Related Topics: • Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard • Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast • Set Your Station ID 662
Home > Appendix > Supplies Supplies When the time comes to replace supplies, such as the toner or drum, an error message will appear on your machine's control panel or in the Status Monitor. For more information about the supplies for your machine, visit www.brother.com/original/index.html or contact your local Brother dealer. The Supply Order Number (No.) will vary depending on your country and region. Supply Items Supply Order No.
Related Information • Appendix Related Topics: • Replace Supplies 664
Home > Appendix > Important Information About Toner Cartridge Life Important Information About Toner Cartridge Life Toner Cartridge Life This product detects the life of the toner cartridges using the following two methods: • Detection by counting the dots of each color that are necessary to create an image • Detection by counting the rotations of the developer roller This product has a function that will count the dots of each color used to print every document and the rotations of each toner cartridg
Home > Appendix > Brother Numbers Brother Numbers IMPORTANT For technical help, you must call the country where you bought the machine. Calls must be made from within that country. >> FAQs (Frequently Asked Questions) >> For Customer Service >> Ordering Accessories and Supplies FAQs (Frequently Asked Questions) The Brother Solutions Center is our one-stop resource for all your machine needs.
PayPal account, you can order directly from Brother. Visit us online for a complete selection of the Brother accessories and supplies that are available for purchase. NOTE In Canada, only Visa and MasterCard are accepted. In USA: 1-877-552-MALL (1-877-552-6255) 1-800-947-1445 (assistance via fax) www.brothermall.com In Canada: www.brother.
Brother International Corporation 200 Crossing Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Brother International Corporation (Canada) Ltd. 1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, Canada H9B 3H6 Visit us on the World Wide Web www.brother.