Product Safety Guide HL-L3210CW / HL-L3230CDN / HL-L3230CDW / HL-L3270CDW / DCP-L3510CDW / DCP-L3551CDW / MFC-L3710CW / MFC-L3735CDN / MFC-L3745CDW / MFC-L3750CDW / MFC-L3770CDW Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Read this guide before attempting to operate the product, or before attempting any maintenance.
Symbols and Conventions Used in the Documentation The following symbols and conventions are used throughout the documentation. Follow all warnings and instructions marked on the product. WARNING Hot Surface icons warn you not to touch product parts that are hot. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
Choose a Safe Location for Your Product WARNING Choose a location where the temperature remains between 10°C and 32°C, the humidity is between 20% and 80%, and where there is no condensation. DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water. Doing so may create the risk of an electrical shock, short circuit, or fire, as water may come into contact with the product (including condensation caused by heating/air conditioning/ventilation equipment).
DO NOT put the product in a location that blocks or obstructs any slot or opening in the product. These slots and openings are provided for ventilation. Blocking the machine's ventilation could create a risk of overheating and/or fire. Instead: • Keep a minimum gap around the product as shown in the illustration. Products without scanning function 320 mm 150 mm 150 mm 220 mm Products with scanning function 400 mm 150 mm 150 mm 220 mm • Place the product on a solid level surface.
DO NOT place this product on an unstable cart, stand, or table, particularly if children are expected to be near the product. The product is heavy and may fall, causing injury to you or others and serious damage to the product. For the products with scanning functionality, there is an added risk of injury if the scanner glass should break. Avoid placing your product in a busy area.
There are high-voltage electrodes inside the product. Before you access the inside of the product, including for routine maintenance such as cleaning, make sure you have unplugged the telephone line cord first (MFC models only) and then the power cord from the electrical socket, as well as any telephone/RJ-11 (MFC models only) or Ethernet/RJ-45 cables (Network models only) from the product.
DO NOT dismantle this product. Dismantling this product could cause a fire or electrical shock. DO NOT attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltage points and other risks and may void your warranty. Refer all servicing to Brother customer service or your local Brother dealer. DO NOT drop any metallic hardware or any type of liquid on the power plug of the product. It may cause an electrical shock or a fire.
DO NOT use this product during a thunderstorm. There may be a remote risk of an electrical shock from lightning. DO NOT put toner cartridges, a toner cartridge and drum unit assembly, or a waste toner box into a fire or places susceptible to fire. It could explode, resulting in injuries. FIRE HAZARDS Failure to follow the warnings in this section may create the risk of a fire.
(Models with Wireless LAN function only) DO NOT use the product near any medical electrical equipment. The radio waves emitted from the product may affect medical electrical equipment and cause a malfunction, which may result in accident or injury. For users with pacemakers: This product generates a weak magnetic field. If you feel anything wrong with the operation of your pacemaker when near the product, move away from the product and consult a doctor immediately.
Plastic bags are used in the packing of this product. Plastic bags are not toys. To avoid the danger of suffocation, keep these bags away from babies and children, and dispose of them correctly. (MFC models only) Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been unplugged from the wall socket. Never install telephone wiring during a thunderstorm.
CAUTION When you move the product, carry the product as shown in the illustration. (DCP-L3510CDW/DCP-L3551CDW/MFC-L3710CW/MFC-L3735CDN/MFC-L3745CDW/ MFC-L3750CDW/MFC-L3770CDW) To prevent possible injuries, at least two people should lift the product by holding it from the front and back.
To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations. HL-L3270CDW For your safety, unplug the product from the electrical socket when it is not used for a long time.
When multiple devices, including this product, are connected to a computer using USB cables, you may feel an electric charge when you touch metal parts of the product. Some products and/or their cartons contain a silica gel pack. DO NOT eat the silica gel pack; throw it away. If you ingest it, seek medical attention immediately. DO NOT attempt to dismantle the toner cartridge. If toner powder should leak out, avoid inhaling it or letting it come in contact with your skin.
• We recommend that you use our genuine toner cartridges to replace cartridges that come with the device. Non-genuine toner cartridges may cause damage to the machine. They may also result in differences in the colours or storage stability. (Not all non-genuine toner cartridges cause these issues.) • DO NOT remove or damage any of the caution or warning labels inside the product. • DO NOT put objects on top of the product. Doing so may cause the product to malfunction.
insert the plug into the outlet, call your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded plug. 2. DO NOT place anything on top of the power cord including this product. DO NOT allow the power cord to be stepped on. 3. DO NOT touch a document during printing. 4. Never push objects of any kind into this product through cabinet slots, since they may touch dangerous voltage points or short out parts resulting in a risk of fire or electric shock.
4. Never push objects of any kind into this product through cabinet slots, since they may touch dangerous voltage points or short out parts resulting in a risk of fire or electric shock. Never spill liquid of any kind on the product. 5. Unplug this product from the mains power and telephone line sockets (MFC models only), and refer servicing to qualified Service Personnel under the following conditions: • If the power cord is damaged or frayed. • If liquid has been spilled into the product.
9. This equipment may not provide for the effective hand-over of a call to another device connected to the same line. 10. Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device.
IMPORTANT NOTICE (MFC models only) Under power failure conditions, this telephone may not operate. Please ensure that a separate telephone, not dependent on local power, is available for emergency use in emergencies. Important Information for Some Countries Important Safety Instructions 1. This product is equipped with a grounding type plug, a plug having two or three pins. This plug will fit into only a grounding-type power outlet. This is a safety feature.
IMPORTANT • This equipment may not be used on coin service lines provided by the telephone company or connected to party lines. (MFC models only) • Brother cannot accept any financial or other responsibilities that may be the result of your use of this information, including direct, special, or consequential damages. There are no warranties extended or granted by this document.
Approval Information (MFC Models Only) THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country. Declaration of Conformity (Europe Only) We, Brother Industries, Ltd.
LAN Connection (Models with Wired LAN Function Only) CAUTION DO NOT connect this product to a LAN connection that is subject to over-voltages.
equipment, you must dispose of it separately at an appropriate collection point, and not place it in the normal domestic unsorted waste stream. This will benefit the environment for all. For detailed information, please refer to the following Brother India website: https://www.brother.in/ For inquiries on the collection program, please call Toll Free: 1800 222422 or 1800 2098904 (Between 9AM-5PM Mon-Sat).
FlashFX® Pro™ is a trademark of Datalight, Inc. FlashFX® Tera™ is a trademark of Datalight, Inc. Reliance™ is a trademark of Datalight, Inc. Reliance Nitro™ is a trademark of Datalight, Inc. Datalight® is a registered trademark of Datalight, Inc. Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
Service Centre Locations For service centres in your country, contact your local Brother Office. Address and telephone contact information for local offices can be found at www.brother.com by selecting your region and country. Unlawful Use of Copying or Scanning Equipment (Products with scanning function only) It is an offence to make reproductions of certain items or documents with the intent to commit fraud.
Month of publication: 02/2019 D00WF5001-01 OCE/ASA/SAF/GLF/TWN Version A
