Quick Setup Guide

Unpack the machine and check the components
NOTE:
•Manuals in Spanish for this model are available on the Brother
Solutions Center. (USA only): support.brother.com/manuals
Los manuales en español de este modelo están disponibles
en el Brother Solutions Center. (Solamente en los Estados
Unidos): support.brother.com/manuals
•The components included in the box may differ depending on
your country.
•The available connection interfaces vary depending on the
model.
•Interface cables are not included. You must purchase the
correct interface cable if you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is
no more than 6 feet (2 meters) long.
Network cable (DCP-L3551CDW / MFC-L3750CDW /
MFC-L3770CDW)
Use a straight-through Category 5 (or greater) twisted-pair
cable.
•The illustrations in this Quick Setup Guide show the
MFC-L3770CDW.
Remove the packing materials and re-install the drum unit and toner cartridge assemblies
Load paper in the paper tray
Connect the power cord and turn on the machine
Select your language (if needed)
Drum Unit and Toner Cartridge
Assemblies*
(Black, Cyan, Magenta, and Yellow)
Waste Toner Box* Belt Unit*
Telephone Line Cord
(For MFC models)
AC Power Cord
Brother Installation Disc Quick Setup Guide Product Safety Guide Reference Guide
3
5
2
1
Back Front
* Already installed in the machine
Watch our Video FAQs for
help with setting up your
Brother machine:
support.brother.com/videos.
Adjust the paper
guides.
Do not exceed this mark.
BK
C
M
Y
Remove the orange part from each cartridge.
Push firmly.
x4
Remove all the blue packing tape.
Slide all eight yellow drum locks.
1. Press Menu.
2. Press▲or▼todisplay
[Initial Setup], and then press
OK.
3. Press▲or▼todisplay
[Local Language], and then press
OK.
4. Press▲or▼toselectyourlanguage,
and then press OK.
5. Press Stop/Exit.
 For LCD models
 For Touchscreen models
1. On the machine’s touchscreen,
press
[Settings] >
[All Settings] >
[Initial Setup] >
[Local Language].
2. Press your language.
3. Press .
Configure the machine for faxing (For MFC models)
If you do not plan to use the fax feature on this machine, go to step .
6
NOTE:
•For more information on using the fax feature, see the Online User’s Guide.
•Your machine is programmed to automatically receive faxes. To change this default mode, see the Online User’s Guide.
A. Set the date and time
Press [Settings] > [All Settings] >
[Initial Setup] > [Date & Time], and
then set the date and time you want.
B. Set the Station ID
Press [Settings] > [All Settings] >
[Initial Setup] > [Station ID], and then
set your fax or telephone number and your name.
Connect the telephone line cord
(For MFC models)
If you do not plan to use the fax feature on this machine, go to step .
4
Quick Setup Guide
HL-L3290CDW / DCP-L3551CDW / MFC-L3710CW /
MFC-L3750CDW / MFC-L3770CDW
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: support.brother.com/manuals.
D01GT9001-00
USA/CAN
Version A