User Manual
Table Of Contents
- Online User's Guide HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW
- Table of Contents
- Before You Use Your Brother Machine
- Introduction to Your Brother Machine
- Paper Handling
- Print
- Print from Your Computer (Windows®)
- Print a Document (Windows®)
- Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows®)
- Print as a Poster (Windows®)
- Print on Both Sides of the Paper (Windows®)
- Print as a Booklet (Windows®)
- Secure Print (Windows®)
- Use a Macro from Your Computer (Windows®)
- Use a Preset Print Profile (Windows®)
- Change the Default Print Settings (Windows®)
- Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows®)
- Monitor the Status of the Machine from Your Computer (Windows®)
- Print Settings (Windows®)
- Print from Your Computer (Macintosh)
- Print a Document (Mac)
- Print on Both Sides of the Paper (Mac)
- Print More Than One Page on a Single Sheet of Paper (N in 1) (Mac)
- Secure Print (Macintosh)
- Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation) (Macintosh)
- Monitor the Status of the Machine from Your Computer (Macintosh)
- Print Options (Macintosh)
- Print One Page Duplicates on Different Types of Paper
- Cancel a Print Job
- Test Print
- Print from Your Computer (Windows®)
- Network
- Get Started
- Network Management Software and Utilities
- Additional Methods of Configuring Your Brother Machine for a Wireless Network
- Before Configuring Your Brother Machine for a Wireless Network
- Configure Your Machine for a Wireless Network
- Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n)
- Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
- Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
- Configure Your Machine for an Enterprise Wireless Network
- Use Wi-Fi Direct®
- Print from Your Mobile Device Using Wi-Fi Direct
- Configure Your Wi-Fi Direct Network
- Wi-Fi Direct Network Configuration Overview
- Configure Your Wi-Fi Direct Network Using the One-Push Method
- Configure Your Wi-Fi Direct Network Using the One-Push Method and Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Using the PIN Method
- Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Manually
- Advanced Network Features
- Technical Information for Advanced Users
- Security
- Lock the Machine Settings
- Network Security Features
- Before Using Network Security Features
- Secure Function Lock 3.0
- Use Active Directory® Authentication
- Use LDAP Authentication
- Manage Your Network Machine Securely Using SSL/TLS
- Introduction to SSL/TLS
- Certificates and Web Based Management
- Supported Security Certificate Features
- Create and Install a Certificate
- Manage Multiple Certificates
- Manage Your Network Machine Securely Using Web Based Management
- Manage Your Network Machine Securely Using BRAdmin Professional 3 (Windows®)
- Print Documents Securely Using SSL/TLS
- Manage Your Network Machine Securely Using IPsec
- Send an Email Securely
- Use IEEE 802.1x Authentication for a Wired or a Wireless Network
- Store Print Log to Network
- Mobile/Web Connect
- Troubleshooting
- Routine Maintenance
- Machine Settings
- Appendix
- Glossary
Level 2 Level 3 Level 4 Level 5 Descriptions
WLAN TCP/IP WINS Server Secondary
Specify the IP address of the secondary
WINS server.
DNS Server Primary
Specify the primary DNS server's IP
address.
Secondary
Specify the secondary DNS server's IP
address.
IP Boot Tries
- Specify the number of attempts the
machine will try to obtain an IP address
when the Boot Method is set to any
setting except Static.
APIPA
- Allocate the IP address from the link-local
address range automatically
1
.
IPv6
- Enable or disable the IPv6 protocol.
Setup Wizard
- - Configure the wireless network settings
using the setup wizard.
WLAN
Assistant
- - Configure your wireless network settings
using the Brother CD-ROM.
WPS
- - Configure your wireless network settings
using the one-button push method.
WPS w/ PIN
Code
- - Configure the wireless network settings
using WPS with a PIN code.
WLAN Status Status
- Display the wireless Ethernet link status.
Signal
- Display the signal condition.
SSID
- Display SSID.
Comm. Mode
- Display the current Communication
Mode.
MAC Address
- - Display the MAC address of the machine.
Set to
Default
- - Restore wireless network settings of your
machine to the factory settings.
WLAN Enable
- - Turn the wireless interface on or off.
Wi-Fi Direct Push Button
- - Configure your Wi-Fi Direct network
settings using the one-button push
method quickly.
PIN Code
- - Configure your Wi-Fi Direct network
settings using WPS with a PIN code
quickly.
Manual
- - Configure your Wi-Fi Direct network
settings manually.
Group Owner
- - Set your machine as the Group Owner.
Device Info. Device Name
- View your machine's device name.
SSID
- Display the Group Owner's SSID.
IP Address
- Display your machine's IP Address.
Status Info. Status
- Display the Wi-Fi Direct network status.
Signal
- Display the current Wi-Fi Direct network
signal strength.
I/F Enable
- - Enable or disable the Wi-Fi Direct
connection.
NFC
- - - Turn the NFC function on or off.
338