Quick Setup Guide

Unpack the machine and check the components
NOTE:
•Manuals in Spanish for this model are available on the Brother Solutions Center. (USA
only): solutions.brother.com/manuals
Los manuales en español de este modelo están disponibles en el Brother Solutions
Center. (Solamente en los Estados Unidos): solutions.brother.com/manuals
•The available connection interfaces vary depending on the model.
•You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet
(2 meters) long.
Network cable
(For HL‑L5100DN / HL‑L5200DW(T) / HL‑L6200DW(T))
Use a straight‑through Category 5 (or greater) twisted‑pair cable.
Parallel cable
(For HL‑L5000D)
Use the parallel cable provided with the machine.
•The illustrations in this Quick Setup Guide show the HL‑L6200DW.
Remove the packing materials and install the drum unit and toner cartridge assembly
Load paper in the paper tray
Connect the power cord and turn on the machine
Select your language (if needed)
Drum Unit and Toner
Cartridge Assembly
(pre‑installed)
Installation CD‑ROM AC Power Cord
Quick Setup Guide Product Safety Guide
Reference Guide
(only for certain models)
1. Press▼or▲toselect[General Setup], and then press OK.
2. Press OK to select [Local Language].
3. Press▼or▲toselectyourlanguage,andthenpressOK.
4. Press Cancel.
3
4
2
1
Adjust the paper
guides.
Back Front
Remove the orange part.Discard the
silica gel pack.
Quick Setup Guide
HL‑L5000D / HL‑L5100DN / HL‑L5200DW / HL‑L5200DWT /
HL‑L6200DW / HL‑L6200DWT
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: solutions.brother.com/manuals.
Watch our Video FAQs for
help with setting up your
Brother machine:
solutions.brother.com/videos.
D01GT0001‑00
USA/CAN
Version C