Operation Manual

Level 2 Level 3 Descriptions
Skip Tray
- Select a specific tray you do not want to use; if it is loaded with paper of the
wrong size.
Separator Tray
- Select the tray that contains the paper used as the separator paper, which is
inserted between each print job.
2-sided 2-sided
Print
Select whether to print on both sides of the paper.
Single Image
For a print job where the last page is a 1-sided image, select the 1-sided
Feed option to reduce printing time.
When you use Letterhead or Preprinted paper, you must select the 2-
sided Feed option. If you select 1-sided Feed for Letterhead or
Preprinted paper, the last page will be printed on the reverse side.
Paper Type MP Tray
Select the paper type that matches the paper in the MP tray.
Tray 1
Select the paper type that matches the paper in the standard paper tray.
Tray 2
2
Select the paper type that matches the paper in the Optional Tray (Tray 2).
Tray 3
2
Select the paper type that matches the paper in the Optional Tray (Tray 3).
Tray 4
2
Select the paper type that matches the paper in the Optional Tray (Tray 4).
Paper Size MP Tray
Select the size of paper you loaded in the MP tray.
Tray 1
Select the size of paper you loaded in the standard paper tray.
Tray 2
2
Select the size of paper you loaded in the Optional Tray (Tray 2).
Tray 3
2
Select the size of paper you loaded in the Optional Tray (Tray 3).
Tray 4
2
Select the size of paper you loaded in the Optional Tray (Tray 4).
Paper Low
Notice
Paper Low
Notice
Select whether to display a message telling you that the paper tray is nearly
empty.
Notice Level
Select the minimum paper level that will trigger the message.
Check Size
- Select whether to display a message telling you to check that the size of the
paper in the machine and the machine's Paper Size setting match.
1
Available if the Mailbox is installed.
2
Available if the Optional Tray(s) is installed.
[Settings] > [General Setup]
Level 2
Level 3 Level 4 Descriptions
Local Language
- - Select the LCD language for your country.
Resolution
- - Choose a print resolution.
Density
- - Increase or decrease the print density.
Ecology Toner Save
- Increase the page yield of the toner cartridge.
Sleep Time
- Set how much time will pass before the machine enters Power
Saving Mode.
Quiet Mode
- Decrease printing noise.
Auto Power Off
- Set the number of hours that the machine will remain in Deep
Sleep Mode before going into Power Off Mode.
Volume Beep
- Adjust the beeper volume.
Panel Control LCD Settings Backlight
Adjust the brightness of the LCD backlight.
Dim Timer
Set how long the LCD backlight stays on after the last finger
press.
332