User's Manual
Table Of Contents
- Online User's Guide HL-L8260CDW/HL-L8360CDW/HL-L8360CDWT
- Table of Contents
- Before You Use Your Brother Machine
- Introduction to Your Brother Machine
- Paper Handling
- Print
- Print from Your Computer (Windows®)
- Print from Your Computer (Macintosh)
- Cancel a Print Job
- Test Print
- Print Data Directly from a USB Flash Drive
- Network
- Supported Basic Network Features
- Network Management Software and Utilities
- Additional Methods of Configuring Your Brother Machine for a Wireless Network
- Before Configuring Your Brother Machine for a Wireless Network
- Configure Your Machine for a Wireless Network
- Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
- Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
- Configure Your Machine for an Enterprise Wireless Network
- Use Wi-Fi Direct®
- Print from Your Mobile Device Using Wi-Fi Direct
- Configure Your Wi-Fi Direct Network
- Wi-Fi Direct Network Configuration Overview
- Configure Your Wi-Fi Direct Network Using the One-Push Method
- Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Using the PIN Method
- Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Manually
- Advanced Network Features
- Technical Information for Advanced Users
- Security
- Lock the Machine Settings
- Network Security Features
- Before Using Network Security Features
- Secure Function Lock 3.0
- Use Active Directory® Authentication
- Use LDAP Authentication
- Manage Your Network Machine Securely Using SSL/TLS
- Introduction to SSL/TLS
- Certificates and Web Based Management
- Supported Security Certificate Features
- Create and Install a Certificate
- Manage Multiple Certificates
- Manage Your Network Machine Securely Using Web Based Management
- Manage Your Network Machine Securely Using BRAdmin Professional 3 (Windows®)
- Print Documents Securely Using SSL/TLS
- Manage Your Network Machine Securely Using IPsec
- Send an Email Securely
- Use IEEE 802.1x Authentication for a Wired or a Wireless Network
- Store Print Log to Network
- Mobile/Web Connect
- Brother Web Connect
- Google Cloud Print
- AirPrint
- Mobile Printing for Windows®
- Mopria® Print Service
- Brother iPrint&Scan
- Near-Field Communication (NFC)
- Troubleshooting
- Routine Maintenance
- Machine Settings
- Appendix
Home > Routine Maintenance > Calibrate Color Output
Calibrate Color Output
The output density for each color may vary depending on the machine’s environment, including factors like
temperature and humidity. Calibrating your machine helps improve the output color density.
If you are using the Macintosh printer driver, the printer driver automatically retrieves the calibration data. To
retrieve the data manually, you must perform the calibration using Brother's Status Monitor.
>> HL-L8260CDW
>> HL-L8360CDW/HL-L8360CDWT
HL-L8260CDW
1. Press a or b to select the following:
a. Select [Printer]. Press OK.
b. Select [Color Correction]. Press OK.
c. Select [Calibration]. Press OK.
d. Select [Calibrate]. Press OK.
2. Press a to select the [Yes] option.
Calibration starts automatically, and will take a few minutes.
3. Press Cancel.
HL-L8360CDW/HL-L8360CDWT
1. Press
[Toner] > [Calibration] > [Calibrate].
2. Press [Yes].
Calibration starts automatically, and will take a few minutes.
3. Press .
Related Information
• Routine Maintenance
• Reset the Machine's Calibration Settings
• Improve the Print Quality
• Monitor the Status of the Machine from Your Computer (Windows
®
)
• Monitor the Status of the Machine from Your Computer (Macintosh)
343