Operation Manual
Error Message Cause Action
No Paper
The machine is out of paper, or
paper is not loaded correctly in the
paper tray.
• Refill paper in the paper tray. Make sure
the paper guides are set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
• Do not overfill the paper tray.
No Paper Fed T2
No Paper Fed T3
No Paper Fed T4
The machine failed to feed paper
from the indicated paper tray.
Pull out the paper tray indicated on the LCD
and remove all jammed paper.
No Paper MP
The MP tray is out of paper, or
paper is not loaded correctly in the
MP tray.
Do one of the following:
• Refill paper in the MP tray. Make sure the
paper guides are set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
No Paper T1
No Paper T2
No Paper T3
No Paper T4
The machine failed to feed paper
from the indicated paper tray.
Do one of the following:
• Refill paper in the paper tray indicated on
the LCD. Make sure the paper guides are
set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
• Do not overfill the paper tray.
No Toner
The toner cartridge for the colour
indicated on the LCD is not
installed or not installed correctly.
Remove the toner cartridge for the colour
indicated on the LCD from the drum unit, and
put the toner cartridge back into the drum unit.
If the problem continues, replace the toner
cartridge.
No Tray T1
No Tray T2
No Tray T3
No Tray T4
The paper tray is not installed or
not installed correctly.
Reinstall the paper tray indicated on the LCD.
No Waste Toner
The waste toner box is not
installed or not installed correctly.
Reinstall the waste toner box.
Out of Memory
The machine’s memory is full. Press Cancel and reduce the print resolution.
Print Data Full
The machine’s memory is full. Press Cancel and delete the previously stored
secure print data.
Print Unable ## The machine has a mechanical
problem.
• Press and hold to turn the machine off,
wait a few minutes, and then turn it on
again.
• If the problem continues, contact Brother
customer service.
257