Operation Manual

Level 3 Level 4 Level 5 Descriptions
Tray Setting Priority
- When the Auto option is selected in the Tray Use menu,
select the order in which the machine uses paper trays that
contain paper of the same size.
LCD Settings Backlight
- Adjust the brightness of the LCD backlight.
Dim Timer
- Set how long the LCD backlight stays on after the last finger
press.
Ecology Toner Save
- Increase the page yield of the toner cartridge.
Sleep Time
- Set how much time will pass before the machine enters
Power Saving Mode.
Quiet Mode
- Decrease printing noise.
Auto Power Off
- Set the number of hours that the machine will remain in
Deep Sleep Mode before going into Power Off Mode.
Setting Lock Set Password
- Restrict unauthorised users from changing the machine’s
settings.
Lock Off⇒On
-
New Password:
(Available only when
you enter the
password for the first
time.)
-
Interface Select
- Select the interface to use.
If you select the Auto option, the machine changes the
interface to USB or Network depending on which interface is
receiving data.
Auto IF Time
- Set the time-out period for the auto interface selection.
Input Buffer
- Increase or decrease the input buffer capacity.
1
(HL-L8360CDW/HL-L9310CDW) Available if the Optional Tray(s) is installed.
2
Available if the Optional Tray(s) is installed.
[All Settings] > [Printer]
Level 3
Level 4 Level 5 Descriptions
Emulation
- - Choose the emulation mode.
Quality
- - Select the print quality.
Print Options Font List HP LaserJet
Print the font list and samples of HP LaserJet.
BR-Script 3
Print the font list and samples of BR-Script.
Test Print
- Print the test page.
2-sided 2-sided Print
- Select whether to print on both sides of the paper.
Single Image
- For a print job where the last page is a 1-sided
image, select the 1-sided Feed option to reduce
printing time.
When you use letterhead or preprinted paper, you
must select the 2-sided Feed option. If you select
1-sided Feed for letterhead or preprinted paper,
the last page will be printed on the reverse side.
Auto Continue
- - Select if you want the machine to clear paper size
errors or media type errors automatically, and use
paper from other trays.
Output Colour
- - Set the output colour.
Paper Type
- - Set the type of paper.
369