Operation Manual

Level 3 Level 4 Level 5 Descriptions
Colour
Correction
Calibration Calibrate
Initiate colour calibration to check and correct
colours.
Reset
Reset the calibration parameters to the default
settings.
Registration
- Align the print position of each colour.
Auto Correction
- Set the machine to perform Colour Calibration and
Registration automatically.
Colour Settings Setting Mode
Select whether to apply the colour print settings of
the machine or the printer driver.
Colour Mode
Select the colour mode.
Improve Gray
Color
Turn on or off to improve the image quality of shaded
areas.
Enhance Black
Printing
Turn on or off if a black graphic does not print
correctly.
Brightness
Adjust the brightness.
Contrast
Adjust the contrast.
Red
Adjust the red colour.
Green
Adjust the green colour.
Blue
Adjust the blue colour.
[All Settings] > [Network]
Level 3
Level 4 Level 5 Level 6 Descriptions
Wired LAN TCP/IP Boot Method
- Choose the IP method that best suits
your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Configuration
- Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary
WINS server.
Secondary
Specify the IP address of the secondary
WINS server.
DNS Server Primary
Specify the primary DNS server's IP
address.
Secondary
Specify the secondary DNS server's IP
address.
IP Boot Tries
- Specify the number of attempts the
machine will try to obtain an IP address
when the Boot Method is set to any
setting except Static.
APIPA
- Allocate the IP address from the link-
local address range automatically
1
.
IPv6
- Enable or disable the IPv6 protocol.
Ethernet
- - Choose the Ethernet link mode.
Wired Status
- - Display the Ethernet link status.
371