Operation Manual

Level 3 Level 4 Level 5 Level 6 Descriptions
Wired LAN MAC Address
- - Display the MAC address of the
machine.
Set to Default
- - Restore wired network settings of your
machine to the factory settings.
Wired Enable
- - Turn the wired interface on or off.
WLAN TCP/IP Boot Method
- Choose the IP method that best suits
your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Configuration
- Select the WINS configuration mode.
WINS Server Primary
Specify the IP address of the primary
WINS server.
Secondary
Specify the IP address of the secondary
WINS server.
DNS Server Primary
Specify the primary DNS server's IP
address.
Secondary
Specify the secondary DNS server's IP
address.
IP Boot Tries
- Specify the number of attempts the
machine will try to obtain an IP address
when the Boot Method is set to any
setting except Static.
APIPA
- Allocate the IP address from the link-
local address range automatically
1
.
IPv6
- Enable or disable the IPv6 protocol.
Setup Wizard
- - Configure the wireless network settings
using the setup wizard.
WLAN Assistant
- - Configure your wireless network
settings using the Brother installation
disc.
WPS
- - Configure your wireless network
settings using the one-button push
method.
WPS w/ PIN Code
- - Configure the wireless network settings
using WPS with a PIN code.
WLAN Status Status
- Display the wireless Ethernet link
status.
Signal
- Display the signal condition.
SSID
- Display SSID.
Comm. Mode
- Display the current Communication
Mode.
MAC Address
- - Display the MAC address of the
machine.
Set to Default
- - Restore wireless network settings of
your machine to the factory settings.
WLAN Enable
- - Turn the wireless interface on or off.
372